OHS 100 Advance Overhead Stirrer VELP

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm

IKA RW 28 Digital Mechanical Overhead Stirrer Speed Range 60 to 1,400 RPM Viscosity Max. 50,000 mPas (more) Stirring Quantity Max. 80 l Features - Digital speed display - Infinitely adjustable speed from 60 to 1400 rpm in twospeed ranges - Push-through agitator shafts - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Powerful, mechanically controlled laboratory stirrerdesigned for highly viscous applications for quantities up to 80 l (H2O). It issuitable for intensive mixing for use in laboratories and pilot plants. Thestirrer comes equipped with a protection for overheating of the motor by meansof self-locking temperature limiter. Additionally, to secure bowls, a stirringshaft protection and clamping fixture are optionally available.

IKA Ministar 40 Control Overhead Stirrer Speed Range 0/30 to 1000 RPM Viscosity Max. 30,000 mPas St (more)irring Quantity Max. 25 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 30,000 mPas and volume of up to 25 l - Continuously adjustable speed between 0/30 – 1,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The IKA Ministar 40 Control Overhead Stirrer from the new MINISTAR series combines high performance with cutting-edge technology in a compact design. Ideal for special applications, this high-tech stirrer requires minimal space and offers a lifetime guarantee. It features a hardened glass-enclosed, fast response LCD display for maximum visibility and chemical resistance. State-of-the-art vibration sensors automatically stop the process if deviations from permissible thresholds are detected. The stirrer is equipped with an integrated timer/counter for controlling kinetic-sensitive reactions and reminders, handling viscosities up to 30,000 mPas and volumes up to 25 liters. Click Here to View Product Video INCLUDED: The IKA Ministar 40 Control Overhead Stirrer includes: - MINISTAR 40 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 40 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)25 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/30 - 1000 rpmViscosity max.30000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft40 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000 Temperature displayyes Chuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.4 NmTorque measurementtrendDeviation of torque measurement I4 ±NcmTimeryesTimer displayLCDTime setting range1 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)70 x 193 x 154 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

IKA Eurostar 40 Digital Overhead Stirrer Speed Range 0/30 to 2,000 RPM Viscosity Max. 30,000 mPas  (more)Stirring Quantity Max. 25 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universal laboratory stirrer designed for simple stirring tasks for quantities up to 25 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

Heidolph 036300430 Overhead Stirrer Impeller, PR 33 Ringed Propeller Due to its blade dimensions, th (more)e ringed pitched-blade impeller PR 33 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 165-330 mm, ideal ground clearance: 33-66 mm, ideal filling level: 165-330 mm, and ideal volume: 3,500-28,200 ml. The ringed pitched-blade impeller PR 33 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300430 Overhead Stirrer Impeller, PR 33 Ringed Propeller includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immidate realese. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 10 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 12 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves.

Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk The Hermle Z496-1L-A15 12 (more) x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 12 x 15ml adapters. INCLUDED: The Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk includes: - 12 x 15ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty