Ohaus STHVAL Analog Large Volume Magnetic Stirrer, 120V

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C.) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

Heidolph 036300450 Overhead Stirrer Impeller, AR 19 Anchor-Type Particularly in applications with ve (more)ry viscous media, it is important to have a stirring tool in use that enables the mixing process up to the edges of the vessel. This explains the shape of the anchor-type impeller and the width of the stirring blade of 60 mm. The AR 19 anchor-type impeller is ideal for vessels with the following characteristics: ideal vessel diameter: 67 mm, ideal ground clearance: 2 mm, ideal filling level: 67 mm, and ideal volume: 200 ml. The anchor-type impeller consists of a PTFE blade and a PTFE-coated stainless-steel shaft. The stainless-steel core ensures the stability of the stirrer shaft and the secure attachment in the overhead stirrer. The diameter in the clamping area is 6.5 mm; the stirrer shaft with the thick-walled PTFE coating has a diameter of 8 mm. Due to its anti-adhesive property (non-stick coating), the anchor-type impeller is easy to clean and can be used up to a maximum application temperature of 250°C. INCLUDED: The Heidolph 036300450 Overhead Stirrer Impeller, AR 19 Anchor-Type includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) Particularly i (more)n the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 120 is ideal for vessels with the following characteristics: ideal vessel diameter: 200-300 mm, ideal ground clearance: 36 mm, ideal filling level: 200-300 mm, and ideal volume: 6,300-21,200 ml. The VISCO JET® Crack 120 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300506 Overhead Stirrer Visco Jet Crack Impeller, 120mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead StirrerThe Hei-TORQUE Ultimat (more)e 100 is a overhead stirrer with a wide speed range (10 - 2,000 rpm) and a maximum torque of 100 Ncm. It can powerfully stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O).In addition, the Hei-TORQUE Ultimate 100 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC.The overhead stirrer Hei-TORQUE Ultimate 100 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools.*Stand, clamp, and impeller are sold separately*Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark Heat Block, 12 x 15/16mm The Benchmark Block, 12 x 15mm or 16mm test tubes is for use with (more) any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 12 x 15/16mm includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where  (more)it was surplus to requirements. The system powers up but we were unable to test this further at our facility. It is in good cosmetic condition with marks from use throughout. Also included are the following:1x Circle Seal Control Solenoid3000 PSI 1x Busch PumpModel: KB 0010 D 100S/N: 01017631 1x Bio Rad PDS Voltage Converter1x USA Power Cable1x Australia/China Power Cable

This was removed from a university lab where it was surplus to requirements. 6 x Retaining springs i (more)nside with other parts to fit. The item is in a reasonable, used cosmetic condition.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW