Ohaus Guardian 5000 e-G51HSRDM Hotplate Stirrer, 120V

Stability on the Bank The 4 non-slip feet and the zamak base guarantee considerable stability on the (more) bench, making the instrument usable on many surfaces. The highly innovative ergonomic design also plays a major role. Flexibility, Numerous Accessories ZX3 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done by simple pressure, and guarantees excellent performance in the mixing of many types of tubes and contents - Variable speed operation, electronically controlled up to 3000 rpm - Automatic start in touch mode or continuous operation - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

LABOMAG Be9 magnetic stirrer - 1 liter New equipment in its original packaging Model: Be 9 (nine) Sp (more)eed ​​range: 100 - 1000 min⁻¹ Max mixing capacity H₂O: 1000 ml Stirring power: 4 W W×D×H: 130×195×22 mm

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

IKA R 3004.1 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for efficient mixing from both top and bottom - Suitable for aerating low viscosity media and homogenizing solids in liquids - Designed for use at medium to high speeds for diverse applications - Constructed from AISI 316L / 1.4571 stainless steel for durability and corrosion resistance - Operable within an ambient temperature range of 5 - 40 °C for versatile lab environments The R 3004.1 Blade Stirrer is specifically engineered to create a radial flow, effectively mixing materials from both the top and bottom for comprehensive results. Ideal for aerating low viscosity media and homogenizing solids in liquids, it's suited for medium to high-speed applications across a broad spectrum of laboratory uses. Featuring a 50 mm stirrer diameter and a 565 mm shaft length, this stirrer is made from AISI 316L / 1.4571 stainless steel, ensuring durability and longevity. Designed to operate within an ambient temperature range of 5 - 40 °C, it offers a perfect blend of functionality and practicality for professional settings.INCLUDED: The IKA R 3004.1 Blade stirrer includes: - IKA R 3004.1 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Metrohm stirrer E 649.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. TECHNICAL VISUALIZATION 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp Graph of pump characteristics in Alpha Lauda models: Alpha LAUDA immersion thermostat: simple and quick to install.

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)& Shell FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable. Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700611300 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson Safe Aspiration KitSafe and Contamination-FreeThe Safe Aspiration Kit offers various accessor (more)ies for quick collection and easy aspiration of liquid waste when associated with the Safe Aspiration Station.All parts in contact with liquids are autoclavable for a safe and contamination-free environment.AdaptableThe Safe Aspiration Kit offers an ergonomic hand operator, different adapters to aspirate from a wide range of vessels, and a stand with storage for accessories.The kit can also be used with most of the vacuum aspiration systems.ConvenientThe ergonomic hand operator can be stored on the bottle handle provided with the Safe Aspiration Station.The Safe Aspiration Kit also contains a stand with storage for the adapters and the hand operator to help you keep your workspace clean and organized.INCLUDED: The Gilson Safe Aspiration Kit includes: - One hand operator - One silicon adapter for Pasteur pipettes and silicon grease - Silicon grease - One safety stand for the hand operator - One single-channel plastic tip adapter with ejector - One 8-channel plastic tip adapter with ejector - One 8-channel stainless steel needle adapter - Four single-channel stainless steel needle adapters (various sizes) 4 cm length, 1.5 mm diameter4 cm length, 3.0 mm diameter12 cm length, 1.5 mm diameter12 cm length, 3 mm diameter- Two Year Manufacturer's Warranty

The Hei-TORQUE 100 is a overhead stirrer with a wide speed range (10 – 2,000 rpm) and a maximum torq (more)ue of 100 Ncm. With it you can optimally stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O). The Hei-TORQUE 100 performs every stirring task with minimal noise thanks to the latest engine technology. This overhead stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools. Rotation speed range: 10 – 2000 rpm Rotation speed indicator: digital Speed control: electronic Maximum torque: 100 Ncm Torque indicator: symbol Overheat protection: automatic cut-out Maximum viscosity: 60000 mPa s Stirring capacity (H2O): 50 l Throught-shaft design: yes Maximum shaft diameter: 10.5 mm Including tripod and a PR 31 Ringed Pitched-Blade Impeller Due to its blade dimensions, the ringed pitched-blade impeller PR 31 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: Ideal vessel diameter: 83 – 165 mm Ideal ground clearance: 17 – 33 mm Ideal filling level: 83 – 165 mm Ideal volume: 400 – 3500 ml The ringed pitched-blade impeller PR 31 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.