Ohaus Guardian 2000 e-G21ST07R Magnetic Stirrer, 115V

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Complete system with OHS 60 Digital, A00000366 Universal H-Stand, A00001307 Stainless steel helix st (more)irring rod, A00001301 Double clamp. OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 degree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

The ES is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating  (more)protection. Easy to install, resistant and with a small footprint, ES is your best choice for low viscosity samples. Velp ES ensures a smooth start and vigorous agitation even at maximum speed. ES can reach speeds of 1300 rpm and stir up to  15 litres. The device can manage viscosity, with a maximum of  1000 mPas. The easy chuck is easy to close and can accommodate shafts with up to 10 mm diameter and does not require any tool. Stirring speed: 50 – 1300 rpm Maximum stirring volume (H2O): 15 liters Maximum viscosity: 1000 mPas Maximum torque: 15 Ncm Construction material: technopolymer Chuck hole range: 1 – 10 mm Dimensions (WxHxD): 80 x 160 x 200 mm Weight: 1.3 kg

Scilogex OS40-Pro Overhead LCD Digital StirrerThe Scilogex OS40-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 40L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. INCLUDED: The Scilogex OS40-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MS7-H550-S LED Digital Square Magnetic Hotplate Stirrer The Scilogex MS7-H550-S LED Digital (more) 7 Square Magnetic Hotplate Stirrer provides powerful heating and stirring with LED digital display of the set temperature and real-time temperature display. The MS7-H550-7 features an easy to read LED display for heat, analog control for stirring, low temperature stability and hot warning above 50C. Heat only, stir only, or heat and stir together functions provide easier usability. The Electronic speed control allows for constant speed even during changes in load. Click Here to View Product Video INCLUDED: The Scilogex MS7-H550-S LED Digital 7 Square Magnetic Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The new ETHOS X for the Microwave Green Extraction of Natural Products is available in two different (more) and interchangeable configurations, for fragrances and flavors. The ETHOS X takes advantage of a unique microwave selective heating mechanism to produce effective and consistent results time and time again. The fragrances configuration is based on the solvent-free microwave extraction (SFME) technology for the rapid extraction of essential oils from aromatic herbs, spices and dry seeds. The method involves placing a sample in the microwave reactor. A cooling system outside the microwave continuously condenses the vapors which are collected in a fragrances glassware. The excess of water is refluxed back to the extraction vessel to restore the in-situ water of the sample. The flavors configuration is based on the microwave hydro-diffusion and gravity technology (MHG), a new and green method of essential oils extraction from various aromatic plants. The microwave hydro-diffusion and gravity technology (MHG) combines microwave heating and earth gravity at atmospheric pressure to allow flavors to diffuse outside the plant material. Outside of the microwave oven a cooling system continuously condenses the extract. With both methods, after the essential oils are extracted they can be analyzed directly by GC-MS without any preliminary clean-up or solvent exchange steps. Including IKA RC 2 Control recirculating chiller

Dimensions (WxHxD): 600 x 470 x 500 mm

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA RH Digital White Magnetic Hotplate Stirrer Speed Range 100 to 2,000 RPM Heating Temp. Range 50 (more)°C to 320°C Stirring Quantity Max. 15 l Features - Digital display of temperature and speed - Soft-start of stirring motor - Strong magnetic field and wide speed range for volumes up to 15 liters - Error code display - Easy operation with touch keypad The IKA RH Digital White Magnetic Hotplate Stirrer is an innovatively designed digital magnetic stirrer with heating. Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as the ETS-D5. Highly accurate temperature control is possible with the sensor placed directly in the medium. The high heat output of 600 watts and white ceramic heating plate ensure rapid heating and very good chemical resistance, with an adjustable safety temperature from 100 to 360 °C. The digital display shows both temperature and speed, with a strong magnetic field and wide speed range for volumes up to 15 liters. The device features a soft-start of the stirring motor, an error code display, and easy operation with a touch keypad, making it user-friendly and efficient.