MARSHALL Select MS-OT20LE Overhead Stirrer, 20L

Benchmark OS20L Overhead Stirrer, 20L includes stand, and 4 arm propeller, 115V Mixing Capacity (H2O (more)) 20L Maximum Torque 40Ncm Maximum Viscosity 10,000 mPas Features - High torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples - Protected from damage by sensors that shut down operation in the case of high viscosity or obstruction - LCD control panel - Includes complete stand assembly - Compact and quiet - Digital accuracy and convenience - Supplied with a 4 arm stainless steel propeller - 2 Year Manufacturer's Warranty

Heidolph Hei-TORQUE Expert 400 Overhead StirrerWith Hei-TORQUE Expert 400 you can optimally stir vis (more)cosities up to 250,000 mPas or volumes up to 100 liters (H2O). Thanks to its 2-gear stage design, it stirs particularly powerfully in the speed range up to 400 rpm and is therefore particularly suitable for applications with highly viscous media that require mixing in the lower speed range. However, operation at speeds of up to 2,000 rpm is also possible in the second speed.The overhead stirrer Hei-TORQUE Expert 400 performs every stirring task with minimal noise thanks to the latest engine technology. This easy-to-use overhead stirrer has a display of 2.4 inches, which makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Expert 400 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Expert 400 Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead StirrerThe Hei-TORQUE Ultimat (more)e 100 is a overhead stirrer with a wide speed range (10 - 2,000 rpm) and a maximum torque of 100 Ncm. It can powerfully stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O).In addition, the Hei-TORQUE Ultimate 100 offers, above all, the possibility of ramp programming, process monitoring (including timer function, torque trend display as a value), as well as the necessary equipment for documenting your application parameters. For this it is equipped with two interfaces - USB and RS232 - which give you the greatest flexibility to connect the device to a PC, a programmable logic controller (PLC) or an automation system such as e.g. LabManager. The scope of delivery includes the free Hei-Control software for remote control of up to 4 devices via PC.The overhead stirrer Hei-TORQUE Ultimate 100 performs every stirring task with minimal noise thanks to the latest engine technology. The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Ultimate 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools.*Stand, clamp, and impeller are sold separately*Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Ultimate 100 w/ USB & RS232 Interface Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-60mmParticularly in the case of applications wit (more)h very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers! The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 60 is ideal for vessels with the following characteristics: - ideal vessel diameter: 100- 150 mm - ideal ground clearance: 18 mm - ideal filling level: 100- 150 mm - ideal volume: 800 - 2,700 ml The VISCO JET® 60 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-60mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty

IKA Eurostar 100 Digital Overhead Stirrer Speed Range 0/30 to 1,300 RPM Viscosity Max. 70,000 mPas (more) Stirring Quantity Max. 100 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for highly viscous applicationsand intensive mixing for quantities up to 100 l (H2O). It automatically adjuststhe speed through microprocessor controlled technology within the speed rangeof 0/30 – 1300 rpm. Safety circuits installed ensures automatic cut-off in ananti-stall or overload conditions. Continuous comparison of shaft speed todesired speed is maintained and variations are adjusted automatically. Thisguarantees a constant speed even with changes in viscosities of the sample.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Benchmark BactiZapper Tilt, Microsterilizer with Adjustable Tilt The BactiZapper™ TILT Series utiliz (more)es the same well-proven technology of our original Bacti-Zapper Classic, but with a unique, adjustable head angle that allows for more convenient sterilization. When loosened, the adjustment knob can be shifted upward or downward, resulting in a tilt angle range of 55°C. INCLUDED: The Benchmark BactiZapper Tilt, Microsterilizer with Adjustable Tilt includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 New in box Eppendorf 4 x 10ml Vacutainer Ad (more)apters, Cat. # 022639269 for the A-4-38 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022637269 are used in Eppendorf 5702/R Centrifuges. INCLUDED: The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 includes: - Full 6 Month Parts and Labor Warranty

RET control-visc white Speed Range 50 to 1,700 rpm Temperature setting range 0 - 340 °C Setting accu (more)racy speed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life - Automatic switch-off of the heating function if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5) PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc white includes: - RET control-visc white - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz