Magnetic stirrer with heating AREC.X 7 Velp

SUITABLE FOR EVERY LABORATORY NEED The AREX magnetic stirrer is a great tool for basic laboratory ap (more)plications, but with the optional VTF system, which allows you to thermoregulate the sample up to 300°C with an accuracy of ± 0.5°C, it will be possible also use it for more complex applications. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. PRECISE SHAKING ARE 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. APPLICATIONS ARE 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 100 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Exact temperature setting via digital potentiometer Simultaneous digital display of target and actua (more)l temperatures via LCD display Actual temperature displays in medium with 0.1°C resolution when using PT1000 temperature sensor (included) Stirrer can be controlled with two microcontrollers (not included) Plate material: Glass ceramic Plate dimensions: 180 x 180 mm max. stirring capacity (H₂O): 10 L Speed range: 100 – 1500 rpm Dimensions (WxDxH): 215 x 330 x 105 mm Temperature range: 50°C to 500°C Weight: 5 kg

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

TECHNE MCS-102L 2-position magnetic laboratory stirrer New equipment in its original packaging Refer (more)ence: MCS-102L This magnetic stirrer is designed for optimal cell culture in suspension and the use of microcarriers. The MCS-102L accommodates 2 1 liter culture flasks Speed ​​range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel shaking platform with markings for culture flasks Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotating Display: analog Applications: biological samples Rotation speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the bain-marie is used to maintain costant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV-cleaner box  (more)provide protection against contamination. Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel. UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface. UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons. UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box. Advantages of Biosan UV-cleaner boxes: Ozone free high density UV decontamination Long living UV lamps (9,000 hours average) Automatic switch off of UV-lamps when the protective screen is opened Bactericidal flow-type recirculator providing permanent decontamination inside UV –cleaner box during operation Shockproof glass walls Low noise, low energy consumption Walls material: Rear: stainless steel Sides and front: glass (EUROGLASS, Germany) Working surface material: Stainless steel Open UV-lamp: 1 x 25W built‑in bactericidal UV-C, TUV 25W 1SL/25 UV radiation level: 18 mW / cm2 / sec Radiation type: UV (λ = 253.7 nm), ozone-free Digital time setting of direct UV exposure: 1 min–24 hrs / non–stop (increment 1 min) UV-recirculator: 1x25W (efficiency >99% per 1 hour) Daylight lamp (for working area illumination): 1 x TLD-15W Thickness of side panels: 4 mm Thickness of upper front panel: 8 mm Thickness of screen: 4 mm Optical transmission: 95% UV protection: >96%, UV-protection film Working area: 645 × 490 mm Opening dimensions (fully raised protective screen): 645 × 190 mm Safety features: Automatic open UV-lamp switch off when screen is open Power outlets inside the unit: Inlet for power cords and 1x Built-in socket, max. 1000 W Overall dimensions (WxDxH): 700 x 580 x 555 mm Weight: 28.8 kg

The Alltech 2000ES ELSD Evaporative Light Scattering Detector is designed for the detection of diffi (more)cult samples and is an indispensable tool for drug discovery, complementing data from UV/Vis and MS. Offering lower detection limits, the 2000ES ELSD features two operating modes for optimum performance for all applications. The ELSD 2000ES offers the choice of splitting or not splitting, giving you optimum sensitivity for every application. Light Source: Laser diode with collimating optics, 650nm, 30mW output, class IIIB Detector Element: Silicon photodiode Temperature Range: Ambient to 120°C in 1°C increments Nebulizer Gas: Nitrogen preferred Inlet Pressure: 60 to 80psig Typical Operating Range: 1.0 to3.0L/min Flow Control: Digital mass flow control Mobile Phase Flow Rate: To 5.0mL/min Analog Output: 1V or 10mV full scale Dimensions (h x w x d): 585mm x 315mm x 550mm Weight: 16Kg 230V / 50-60Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW