Magnetic stirrer AM4 Digital Velp with probes, rods and clamps

Metrohm stirrer E 649.

Yamato LT-400A Overhead Stirrer, 100-120V Speed Range 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor (more) DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 34~340rpm Max Torque  (more)1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples). INCLUDED: The Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The VELP stirring rod with 6 hole vane is ideal for the low / medium viscosity range to a medium low (more) speed range. This stirring rod is compatible with ES, LS, DLS, LH, DLH, PW, OHS series stirrers. It generates a tangential flow with reduced turbulence and with a light mixing of the substances. When choosing the correct stirring rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

IKA R 1345 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the bottom to the top. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 100 mmShaft Ø: 8 mmShaft length: 540 mm INCLUDED: The IKA R 1345 Propeller 4 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range  (more)50 to 500°C Stirring Quantity Max. 5 l Features - Powerful motor for stirring quantities of up to 5 l (H2O) - Simultaneous digital display of target and actual temperatures via LCD display - Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery) - Control accuracy in medium +/- 0,5 K (in combination with PT 1000) - Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor - 3 operating modes to choose (standard, safe, adjustment protection) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer is a powerful and versatile lab tool, ideal for stirring quantities up to 5 liters (H2O) with a speed range of 100 - 1500 rpm. It features a simultaneous LCD display of target and actual temperatures, and includes a PT 1000 temperature sensor for precise control with an accuracy of +/- 0.5 K. With three operating modes (standard, safe, adjustment protection), a fixed safety circuit at 550 °C, and a Hot Top indicator, it ensures safe operation. The ceramic set-up plate provides excellent chemical resistance and heats up to 500 °C. The stirrer’s compact design, durable construction, and advanced features, including a digital error code display and elevated control panel, make it a reliable choice for various laboratory applications.

AREC 4 Digital was designed for laboratories that have little space available, that need an easily m (more)ovable instrument, but that do not want to give up the power and precision of a magnetic stirrer for a large number of applications. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating technology uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 4 Digital: - Find space in any laboratory - Easy to use and highly resistant to chemicals - Maximum portability - Precise setting of temperature and agitation - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 4 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, ideal for any laboratory need. Arec 4 Digital reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 4 Digital is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Leitz MicroManipulator Lab This item was removed from a university where it was surplus to requireme (more)nt. The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

Arctiko Flexaline LRE 125-US +2 C / +8 C Undercounter Refrigerator Refrigerant R600a Temperature R (more)ange +2 / +8 °C (+35.6 / 46.4 °F) Capacity 3.85 Cu. Ft (109 Liters) Features - Superior performance and temperature stability - High-quality MEC-183 digital controller with battery backup - Integrated data logger with USB interface - Attractive purchase price - Freeze guard (refrigerator models) - Door alarm - Solid door Lock - Power failure alarm (visual and acoustic) - LED light - Port hole (20mm) - Forced air cooling (refrigerator models) - UL61010 certification - Energy Star rating - 115V/60Hz supply - Sizes available from 2.11cu.ft. up to 21.11 cu.ft. The Arctiko Flexaline™ LRE 125-US under counter fridge offers the superior features required for pharmaceutical applications at an attractive price. This model will fit anywhere due to its compact design and dimensions.INCLUDED: The Arctiko Flexaline LRE 125-US +2 C / +8 C Undercounter Refrigerator includes: - Key for Door Lock - Shelves - Power Cord - Operators Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

Scilogex TC1000-S Thermal CyclerThe Scilogex TC1000-S Thermal Cycler delivers high performance, high (more) throughput with easy programming via the color LCD touch screen display. Excellent temperature uniformity and high speed ramping rates with outstanding heat conductivity. Ideal for 96 x 0.2mL PCR tubes or 96-well plates. INCLUDED: The Scilogex TC1000-S Thermal Cycler includes: - 96 Well Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty