IKA TWISTER, 2 pcs. Magnetic stirrer, 2 pcs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A motor control console designed for controlling agitation systems in Applikon bioreactors. Designe (more)d for use with Applikon P100 drive motors Knob adjustment of motor speed with three digit LCD readout Interchangeable local or remote control via rear RS232 port Speed Range: Approx 0 to 230 RPM 230V / 50-60Hz

IKA R 2302 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA Eurostar 60 Digital Overhead Stirrer Viscosity Max 50000mPas Speed Range 0/30 - 2000 rpm Devi (more)ation of Speed Measurment Less than 1% Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universally used strong laboratory stirrer for quantities upto 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 - 2000 rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintainedand variations are adjusted automatically. This guarantees a constant speedeven with changes in viscosities of the sample. INCLUDED: The IKA Eurostar 60 Digital Overhead Stirrer includes: - EUROSTAR 60 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 60 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)40 lMotor rating input176 WMotor rating output126 WMotor principleBrushless DCSpeed display7 segment LEDSpeed range0/30 - 2000 rpmViscosity max.50000 mPasOutput max. at stirring shaft126 WPermissible ON time100 %Torque max. at stirring shaft60 Ncm Speed controlstepless Setting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.6 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

Heidolph Hei-TORQUE Expert 200 Overhead StirrerWith Hei-TORQUE Value 200 you can optimally stir visc (more)osities up to 100,000 mPas or volumes up to 50 liters (H2O). Thanks to a wide speed range from 10 to 2,000 rpm and a maximum torque of 200 Ncm, it works particularly powerful.The laboratory stirrer Hei-TORQUE Expert 200 performs every stirring task with minimal noise thanks to the latest engine technology. This laboratory stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Expert 200 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Expert 200 Overhead Stirrer includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

This listing is for a Jenway 7305 UV/Visible Spectrophotometer. The unit is in full working conditi (more)on and is ready for immediate release. The Jenway 73 Series Single-Beam Spectrophotometers are designed for precise and versatile optical measurements across a range of applications. Featuring improved optics, these spectrophotometers deliver enhanced performance with a narrow spectral bandwidth of 5 nm and an absorbance range of 0.3 to 2.5 A, ensuring accurate and reliable results. Available in both visible and UV/visible spectrum models, the 73 Series offers a range of capabilities from basic absorbance measurements to advanced functionality, such as spectrum scanning, quantitation, and kinetics. Key Features: Improved Optics: The enhanced optical design delivers superior accuracy with a narrow 5 nm spectral bandwidth, providing clear and precise readings. Measurement Modes: Standard modes include absorbance, % transmittance, and concentration, allowing for a wide range of applications. Advanced Models: Higher-end models in the series add functionality for spectrum scanning, quantitation, and kinetics, expanding the range of experimental capabilities. Lamp Systems: Visible Models: Equipped with a tungsten halogen lamp for the visible spectrum, featuring a "lamp save" function that turns off the lamp during periods of inactivity to prolong lamp life. UV/Visible Models: Feature a xenon lamp with a "press to read" system, which only activates the lamp during measurements, ensuring accurate readings and extending the lifespan of the lamp. RS-232 Port and Software: Easily control and collect data via the RS-232 port, with software included for seamless integration into laboratory data management systems.

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

This Nikon Optiphot-2 Microscope was removed from a university lab where it was surplus to requireme (more)nts. The unit powers up and all the objectives appear to focus well. It is in good cosmetic condition with only minor marks from use. There are 4 x Objectives included, and they are as follows; Objectives: Nikon 320081 Japan M Plan 100 1.25 oil 210/0Nikon 140131 Japan M Fluor 40/1.0 Oil 210/0Nikon 350730 Japan M Plan 10 0.25 210/0Nikon 120058 Japan M Fluor 20/0.6oil 210/0 Nikon PSM-2120

This Horiba LA-920 Laser Scattering Particle Size Distribution Analyzer was removed from a universit (more)y lab where it was surplus to requirements. The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it at our facility. The system communicates with the supplied PC with Horiba Software Version 3.74. installed.

The MW-04-2 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, RS485. The MW-04-2 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-2 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, RS485 may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-2 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

IKA VSS 1 Vacuum Safety SetThe Woulff bottle is a condensate trap connected ahead of the vacuum pump (more) to prevent vapors from being released into the air. INCLUDED: The IKA VSS 1 Vacuum Safety Set includes: - RV 05.10 Balljoint clamp - RV 10.102 Receiving flask (KS 35/20, 500 ml) - RV 10.5005 Set of hoses - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty