IKA RH Digital Magnetic Hotplate Stirrer

ESP is a very compact ultra-flat magnetic stirrer, with no moving mechanical components and maintena (more)nce-free. The control panel is protected from possible damage caused by any leaks of liquids, thanks to a special groove that favors the sliding of the liquid. Excellent agitation is guaranteed by the smooth start and the quickly reachable maximum speed of 1100 rpm. In short: - Maintenance free: no moving parts - The control panel is protected against liquid spills with a drain groove - The technopolymer casing resists chemicals - Accepts bottles up to 5 liters - Designed for maximum durability and backed by a 3 year warranty - Ergonomic - very low height - Speed ​​regulation up to 1100 rpm - Universal mains voltage / frequency range - Light - Ideal surface for viewing particles and color variations - Soft start but quickly reaches the set speed - Ideal for microtiter, microbiology and biochemistry

This listing is for a Stuart UC152 Hotplate StirrerGeneral purpose, reliable stirrer/hotplates with  (more)compact 150X150mm top plate. These units have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in °C. With a choice of robust aluminium or chemically resistant ceramic tops and advanced saftey features: Flashing 'hot' warning light to warm when top plate is too hot to touch. Spillproof design to deflect spills away from the controls abd the user. Independent saftey circuit to protect against overheating. Microprocessor control for accurate temperature setting. The 'hot' warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres). Model UC152 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Max temp: 450°C

Yamato LR-500B Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 100 to 1000 rpm Max T (more)orque 0.98N•m (10kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 100~1000 rpm for medium viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load. INCLUDED: The Yamato LR-500B Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 p (more)ositions, with a single electrical connection and independent operation of each place. Speed range from 200 to 1200 rpm. Temperature range from 30 to 400 ºC. Maximum capacity per square 2L. Plate dimensions of 100 * 100 mm for each square. OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 positions, with a single electrical connection and operation independently of each position. Adjustable speed and temperature, controlled by microprocessor. High precision with integrated internal Pt100 probe. LED display. Keyboard with membrane buttons, sensitive to the touch. The selected parameters are kept in the memory of the equipment even when it is turned off.

Heidolph 036110203 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate The Heidolph 036110203  (more)Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate was designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 RPM and 300°C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50°C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110203 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Outside dimensions (h x w x d): 2000mm x x765mm x 800mm Inside dimensions (h x w x d): 1445mm x 620m (more)m x 670mm Capasity: 599 L Weight: 140kg 230V / 50Hz / 600W

Leica S 6D Stereo Microscope 6.3x - 40x with Leica L2 Lightbox and Schott KL 1500 Electronic This sy (more)stem was removed from a university lab where it was surplus to requirements. The Leica S 6D stereo microscope is in good condition with minor wear. The Leica L2 lightbox is missing its power lead, while the Schott KL 1500 light source is in good condition and fully operational. The system comprises the following: - Leica S 6D Stereo Microscope - Model: S 6D - Serial No.: N/A - Leica L2 Lightbox - Model: L2 - Art No.: 10 446385 - Serial No.: N/A - Schott KL 1500 Electronic - Model: KL 1500 - Serial No.: N/A

MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul Volume Range 0.1 to 2.5ul Adjustable or Fixed Volume A (more)djustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P2.5UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 0.1 to 2.5ul with fine increments of 0.05ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P2.5UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus EX1103N Explorer Precision Balance Maximum Capacity 1,100 g Readability 1 mg Repeatability (Ty (more)pical) 0.001 g Features - 1,100g capacity with 1 mg readability, ideal for demanding laboratory and industrial applications - Automatic internal calibration ensures consistent accuracy and reduces the need for manual calibration - Fast stabilization times, optimized linearity, and enhanced vibration filtering - Metal base with ABS top housing, stainless steel pan, and illuminated level indicator for long-lasting use - Supports a wide range of applications including weighing, parts counting, percent weighing, check weighing, and more - Detachable terminal and automatic glass draftshield with top-mounted side doors for flexible use - Standard RS232 and USB ports, with optional second RS232 or Ethernet for easy data transfer - Four programmable touchless sensors for initiating functions like zero, tare, and print without physical contact The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface.Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks.Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances.Click Here to View Product Video INCLUDED: The Ohaus EX1103N Explorer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty