IKA R 1355 Centrifugal Stirrer

HEIDOLPH BIOBLOCK SCIENTIFIC 94360 Magnetic Stirrer Speed ​​- Rpm: 0-1250 (infinitely variable) 140m (more)m Top Plate Diameter Stirring Volume (H2O): 15 Liters With Power Cable Good Working Condition

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 34~340rpm Max Torque  (more)1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples). INCLUDED: The Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph MR-Hei Standard hot plate stirrer. Maximum temperature of the plate 300 °C (250 °C of the s (more)ample), accuracy ± 1 °C, heating power of 820W. Speed up to 1400 rpm. Maximum capacity 20L. Ceramic coated 145 mm Ø plate. Heidolph MR Hei-Standard hot plate stirrers are suitable for all standard applications. They have protection against overheating that turns off the equipment if the set temperature is exceeded by 25 °C. Rotation uniformity even at very low revolutions. Suitable for continuous operation. Chemically resistant.

SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT100 (more)0 Sensor &amp; Sensor StandLarge volume: Up to 30L of liquid on 10-inch hot plate with powerful magnetic stirringGlass ceramic work plate provides excellent chemical resistant performance and efficient heat transfer.LCD display for precise monitoring of speed and temperature. Liquid temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C.Digital speed control of 100~1500 rpmMax. heating plate temperature 500°CThe "Hot" warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off.Free SD card records the instrument's running data in real time.Timing function: the run time of the instrument can be set. Click Here to View Product Video INCLUDED: The SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor &amp; Sensor Stand includes: - PT1000 Sensor &amp; Sensor Stand - Power Cord - Two Year Manufacturer's Warranty

Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 20L Viscosity Maxi (more)mum 10,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Thermolyne thermostatic block. Contains 2 blocks for 20 samples each and 1 block of 30 positions.

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

Thermo Scientific HERA Freeze HDE Series This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in reasonable cosmetic condition with marks from use.