IKA C-MAG HS 7 Magnetic Hotplate Stirrer Package

LABOMAG Be9 magnetic stirrer - 1 liter New equipment in its original packaging Model: Be 9 (nine) Sp (more)eed ​​range: 100 - 1000 min⁻¹ Max mixing capacity H₂O: 1000 ml Stirring power: 4 W W×D×H: 130×195×22 mm

The VELP stirring rod with 6 hole vane is ideal for the low / medium viscosity range to a medium low (more) speed range. This stirring rod is compatible with ES, LS, DLS, LH, DLH, PW, OHS series stirrers. It generates a tangential flow with reduced turbulence and with a light mixing of the substances. When choosing the correct stirring rod it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V Capacity 20 L Speed Range 50 rpm to 1,800 rpm  (more)Plate Size 7 in x 7 in (18 cm x 18 cm) Features - Stirs up to 20 L with powerful, stable performance - Speed range adjustable from 50 to 1,800 rpm for various applications - Ceramic 7 x 7 inch plate for consistent mixing support - Clear LCD display with high contrast for easy monitoring - Ethernet, USB, and RS232 connectivity options available - Certified safe with CE and TUV certifications - Maintains speed stability within +/-2% - Programmable timer up to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V, delivers reliable and precise stirring for lab applications that require stable performance and versatility. Capable of handling up to 20 liters, it offers a wide speed range from 50 to 1,800 rpm, making it suitable for a variety of mixing tasks. Its 7 x 7-inch ceramic plate ensures even, consistent support for efficient stirring. Designed with user convenience in mind, this model features a bright, high-contrast LCD display for clear status monitoring and offers Ethernet, USB, and RS232 connectivity for easy data logging. Certified for safety with CE and TUV approvals, the Guardian 5000 e-G52ST07C includes a programmable timer that runs up to 99 hours and 59 minutes, providing a dependable, flexible solution for any lab setting. INCLUDED: The Ohaus Guardian 5000 e-G52ST07C Magnetic Stirrer, 120V includes: - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SCILOGEX SCI340-4 Digital Hotplate-Stirrer 4-Channel, ceramic plate, 110V, 50/60Hz, US PlugProduct F (more)eatures - Independent heating and stirring control - LCD displays show set temperatures & speeds and real-time temperatures & speeds - PID controller ensures a precise and accurate heating process - Max. temperature up to 340℃ - Brushless DC motor for powerful speed control and maintenance free - External PT1000 temperature sensor, sensor stand and accessories sold separately - Overheating protection temperature at 420℃ - Stainless steel work plate with ceramic coating provides good chemical-resistance - A wide variety of accessories are available - 2-year warranty INCLUDED: The SCILOGEX SCI340-4 Digital Hotplate-Stirrer 4-Channel, ceramic plate, 110V, 50/60Hz, US Plug includes: - Power Cord - Two Year Manufacturer's Warranty

IKA R 1302 Dissolver Stirrer Radial flow, for drawing the material to be mixed from the top and the (more) bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.Stirrer Ø: 100 mmShaft Ø: 10 mmShaft length: 350 mm INCLUDED: The IKA R 1302 Dissolver Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

CEM Discover Explorer Microwave Reactor Sythesiser  SP-1271A This was removed from a universit (more)y lab where it was surplus to requirements. The unit is in full working order. It was serviced 5 years ago, but then not used since. The software is installed on a Dell Optiplex 380 with monitor, mouse & keyboard.A fresh copy of Windows XP has been installed and the PC is running ChemDriver 3.5.4 software. The software discs are included with the system. The unit appears to communicate with the PC although it does show an error.The main unit shows a Power supply error after running a program for a few minutes.The software shows: Number: 8198 Routine: Heat Sink Temp. We think this may just be user error. It is in good cosmetic condition with marks from use.

The AGV-2/20 automatic comparator determines density and volume of mass standards of class E1 and lo (more)wer in accordance with OIML R111. It is characterized by the highest accuracy and measurement stability ranging between 1 kg to 20 kg. The comparator features specially designed feeder to load and unload the magazine with mass standards. The device is equipped with an additional circulator eliminating air bubbles and a top-class liquid temperature sensor of 0.001 ˚C accuracy. A weighing pan suspended on wires eliminates the eccentricity and minimizes the influence of liquid surface tension. Dedicated software enables to determine mass standards density and calculate uncertainty using A method according to OIML R111. It also allows to determine (verify) liquid density.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Motic Complete Epi-Fluorescence Attachment for BA410E The Motic Complete Epi-Fluorescence Attachment (more) for BA410E is designed to convert your BA410E microscope for fluorescence microscopy. This system connects easily to your BA410E and accommodates three filter cassettes for excitation observation. Fluorescence microscopy uses an optical phenomenon where light absorbed by a material creates molecular excitation, causing the material to re-emit light at a different wavelength. Epi-illuminators in fluorescence microscopy are adapted from vertical illuminators used in reflected light observation. The light source emits radiation that first passes through an exciting filter and then hits a short-pass filter (dichroic beam splitter). This reflected radiation enters the objective, which also acts as a condenser. The objective focuses the exciting radiation onto the object field. The emitted fluorescent light is then collected by the same objective, directed back to the short-pass filter, and finally passes through the barrier filter into the eyepiece for observation. INCLUDED: The Motic Complete Epi-Fluorescence Attachment for BA410E includes: - Epi-Fluorescence Attachment with Filter Cassette - Mercury Lamp 100W - Lamphouse HBO 100W, Collector Lens and Mercury Lamp Socket - Starter Unit HBO 100W - Lamp Centering Tool - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C  (more)Cooling Capacity 1000W at 20°C Refrigerant R449A Features - For internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB & RS232 connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Water-cooled refrigeration system - Class III (FL) according to DIN 12876-1 The Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz features an operating range of -50…+200°C and ± 0.03°C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Water-cooled refrigeration eliminates heat output and fan airflow. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally and an adjustable pump from 8-27 L/min; 1.5-10.2 psi. The CORIO CP includes USB-B and RS232 ports for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 1kW cooling power at 20°C with 110W at -40°C. Options for heating power (1kW or 2kW). 1000FW: cooling water connections G 3/4″ male; contains R449A synthetic refrigerant. Class III (FL) according to DIN 12876-1. Click Here to View Product Video INCLUDED: The Julabo CORIO CP-1000FW Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - G 3/4" Female to 1/2" Hose Barbs for Water Cooling Circuit - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty