IKA C-Mag HS 4 Magnetic Hotplate Stirrer

This listing is for 1 of 6 Stuart SB301 Magnetic Stirrer. The unit is in full working condition and (more) is ready for immediate release. The Stuart SB301 Magnetic Stirrer is a heavy-duty device designed for mixing solids in liquids. It features a stainless steel plate with a dimensions of 300mm x 300mm, making it suitable for use with vessels up to 30 liters in capacity. Key Specifications Speed range: 100 to 600 rpm Maximum stirring capacity: 30 liters Plate material: Stainless steel Overall dimensions: 328mm x 369mm x 103mm Net weight: 5 kg Electricity supply: 230V, 50Hz, 50W

Stirring range: 350 to 2000 rpm Stirring capacity: 1L Maximum vessel diameter: 85 mm Power-on LED Cl (more)ear, chemically resistant nylon top surface Tough, stable plastic base Dimensions (DxWxH): 143 x 143 x 66 mm

IKA RT 15 Multiposition Magnetic Hotplate Stirrer Stirring Positions 15 Positions Speed Range 0 to 1 (more),000 RPM Heating Temp. Range Room Temp. to 120°C Features - Homogeneous temperature distribution across the heating plate - Adjustable reverse operation - Eco-mode for a low self-warming of the surface - Wear free magnetic coils - Error code display - Easy operation with touch keypad - Suitable for continuous operation - Speed range: 0 - 1000 rpm 15-position digital magnetic hotplate stirrer, designed for synchronous heating and stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120 °C, producing a maximum medium temperature of 70 °C (depending on the used vessel). Speed remains constant, even when load changes.

IKA R 1388 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the bottom to the top. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 140 mmShaft Ø: 10 mmShaft length: 800 mm INCLUDED: The IKA R 1389 PTFE Coated Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA C-Mag HS 4 Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range 50°C to  (more)500°C Stirring Quantity Max. 5 l Features - Powerful motor for stirring quantities of up to 5 l (H2O) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 4 Magnetic Hotplate Stirrer features a powerful motor capable of stirring up to 5 liters (H2O) with a speed range of 100 - 1500 rpm. Its ceramic heating plate offers excellent chemical resistance and a heating temperature range of 50 - 500 °C, with a heat output of 250 W. The device ensures precise temperature control via an LED digital display, while the fixed safety circuit at 550 °C and Hot Top indicator provide enhanced safety. An elevated control panel protects against spills, and the digital error code display aids in troubleshooting. The stirrer’s compact dimensions are 150 x 105 x 260 mm, and it weighs 3 kg, making it a reliable and space-efficient choice for laboratory applications.

Demo device. Unused & in original packaging. 2022 model. Great condition. 6 months warranty. Technic (more)al specifications: - External dimensions (WxDxH): 780 x 970 x 945 mm - Internal dimensions (WxDxH): 607 x 670 x 629 mm - Internal volume: 255 l (usable: 162 l) - Rack dimensions: 560 x 500 mm (capacity: 12 pcs., scope of delivery: 3 pcs.) - Max. weight load per rack: 10 kg - Max. weight load per device: 30 kg - Device weight: 97.5 kg - Adjustable temperature: +3 °C - 55 °C - Ambient temperature: +18 °C - +34 °C - Temperature deviation: +/- 0.1 °C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

Eppendorf Deep-Well Plate Buckets, Cat. # 022638556 The Eppendorf Deep-Well Plate Buckets, Cat. # 02 (more)2638556 are designed to be used with the Eppendorf A-2-DWP Microplate Rotor. These deep-well plate buckets come in a set of 2 and are capable of accommodating 5 microplates, 4 cell culture plates or 1 deepwell plate per bucket. With a maximum speed of 3,700 RPM and maximum RCF of 2,250 x g, these buckets provide efficient and reliable performance for high-speed centrifugation. The maximum radius of 16.3 cm allows for efficient sample processing while maintaining sample integrity. These deep-well plate buckets are an essential accessory for researchers and scientists who require reliable and efficient plate processing within the Eppendorf 5804/R and 5810/R Centrifuges. INCLUDED: The Eppendorf Deep-Well Plate Buckets, Cat. # 022638556 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Deep-Well Plate Buckets, Cat. # 022638556 SpecificationsMaximum Speed3,700 RPMMaximum RCF2,250 x gMaximum Capacity5 x Microplates Per Bucket4 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius16.3 cmRotor CompatibilityEppendorf A-2-DWP Microplate Rotor