Heidolph RZR 50 L

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler This item was removed from a university  (more)laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

Dionex DX-500 Ion Chromatography System - AD20 GP50 AS40 ED40 LC20 Lab This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and has been serviced by a qualified technician (report available on request). It is in good working order. It is in good cosmetic condition with minor marks. Included are; LC20 Chromatography EnclosueModel - LC20SN - 00030734 ED40 Electrochemical DetectorModel - ED40-1SN - 00030525 GP50 Gradient PumpModel - GP50SN - 00010476 AD20 Absorbance DetectorModel - AD20-1SN - 99010291 AS40 Automated SamplerModel - AS40-1SN - 08070894

VAC HE-63-P PEDATROL GloveBox Lab This item was removed from a university where it was surplus to re (more)quirement. It is in reasonably good cosmetic condition. The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs. Also includes the following:- Components for the machine- Tubing- Pipes- Automatic Dewpoint Meter

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

MAS.1 R device is an electromagnetic weighing module of high resolution, equipped with R touch panel (more) featuring 5.7" display. The module is intended to be integrated into customer-owned weighing system. The compact design and integrated electronics make it possible to adapt the module into customer's technological line or to install it inside customers' device. In order to reduce the influence of ambient conditions on the measurement result which is a cause high measurement accuracy, it is recommended to install the module inside a draft shield for example. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration.

IKA HS 501 digital reciprocating shaker. Adjustable speed from 0 to 300 min-1. Orbit: 30mm. Maximum  (more)load: 15 Kg. Timer from 0 to 56 min. Includes two holding brackets. The HS 501 digital shaker accepts a maximum of 50 25mL flasks, 48 50mL flasks, 25 100mL flasks, 16 250mL flasks or 12 500mL flasks. Dimensions: 505x585x120mm. User manual. The IKA HS 501 digital reciprocating shakers have a large support surface and digital display. Continuous operation even with extreme loads. Ideal for all types of containers such as settling funnels and for applications such as extractions. Wide variety of optional supports to hold different containers.

iPette Plus 8-Channel Electronic Pipettor, 30-300ul iPette is an innovative electronic pipette devel (more)oped by SCILOGEX. It combines the feature of manual pipette as ergonomic and light weight with the feature of electronic pipette as labor-saving and high performance, it offers new pipetting experience to the users.SCILOGEX iPette Plus Electronic LED Digital Single Channel Pipettors bring form and function together reducing the risk of repetitive strain injuries. The LED display and easy tip ejection system are designed for left or right handed use. The lightweight design, comfortable handle and finger hook with light activation tip ejector ensures effortless repeatable pipetting. iPette's come with a convenient wall charger.iPette Plus Features: - Easy OperationIntuitive interface for setting functions and parameters. - Ergonomic DesignLow operation forces for complete work which is exceptionally fatigue-free. - Convenient and Versatile360° pipetting. Double knobs for simple and versatile control. Easy loading tip cones offers smooth and leak free operation. - Dual charging modesUse of USB charger or the charging stand to ensure uninterrupted use. INCLUDED: The Scilogex iPette Plus 8-Channel Electronic Pipettor, 30-300ul includes: - AC Adapter - USB Cable - Stand - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The KNAUER Online Degasser is a 2-channel for semi-preparative flow rates up to 50 ml/min. The degas (more)sing membrane is an innovative Teflon AF fluoropolymer which is more than 200x more gas permeable than regular Teflon and has excellent physical and chemical stability characteristics. Its high efficiency also allows for reduced internal chamber volumes– less than 7.7 ml per channel. For isocratic HPLC applications the 2 chambers of the semi-prep degasser can be connected in series for maximum degassing efficiency. For gradient applications, up to 2 eluents can be degassed simultaneously. For special applications, one degasser can also be used for multiple HPLC systems. The low dead volume makes reconditioning fast and minimizes solvent waste. Extremely low chamber volumes. Broad chemical compatibility is perfect for use in general HPLC applications Zero hysteresis even at higher flow rates No need to replace check valves or other parts even when under continuous operation Prevents air bubble spikes in the chromatogram Minimizes retention time fluctuations Minimizes gradient reproducibility problems Minimizes unwanted formation of chromophores which can disturb UV detection Minimizes unwanted oxidation or reduction which can disturb electrochemical detection Minimizes fluorescence quenching Technical Data: Dimensions: 85 x 165 x 315 mm (W x H x D) Weight: 2.5 kg Power Supply: 85 – 265 V, 47 – 63 Hz, 20 W Max. Flow Rate: up to 50 ml/min Number of Channels: 2 Degassing Method: gas permeation through Teflon AF amorphous fluoropolymer membrane Degassing Efficiency: < 0.5 ppm residual dissolved O2 at 1 ml/min Dead Volume: 7.7 ml Solvent Applicability: universal, except hydrochloric acid and halogenated hydrocarbons especially hexafluoro isopropanol (HFIP) Wetted Materials: PEEK, Tefzel, Teflon AF Vacuum Chamber: polypropylene and stainless steel

Dual 4 digit LED display timer 12 programmable timing modes 4 time ranges from 0.1 sec to 99:59 hrs  (more)12 to 24Vac/dc or 90 to 264Vac 1 changeover and 1 N/O relay output Programmable reset function External hold and reset Security passcode IP65 enclosure code

CY10 scale&rsquo;s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7&quot; colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.