Heidolph 036300420 Overhead Stirrer Impeller, PR 32 Ringed Propeller

Yamato LT-500A Overhead Stirrer, 100-120V Speed Range 15~600rpm Max Torque 1.0N•m (10.0kgf•cm) Moto (more)r DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. INCLUDED: The Yamato LT-500A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 34~340rpm Max Torque  (more)1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples). INCLUDED: The Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus e-A51ST200 Achiever 5000 Overhead Stirrer, 115/230V Speed Range 6 rpm – 400 rpm, 30 rpm to 2,0 (more)00 rpm Capacity 100 L Maximum Viscosity 100,000 mPa s Features - Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology - Delivers accurate, controlled stirring of viscous liquids with quiet operation. - Simplify set up with the Keyless Chuck - no tools required. - Change shafts quickly and easily with one handed operation. This unique design will save time and effort for everyone in the lab. - Designed for safety. The lock button prevents accidental speed changes and the motor’s overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. - Compact and easy to use. - Simple knob control combined with the bright digital display allows for precise setting and monitoring. - Customize for your application with over 12 accessories. OHAUS Achiever 5000™ Overhead Stirrers are designed for powerful, precise stirring, safety andsimplicity in all applications. The sealed design has an IP54 rating and ensures safe mixing performanceeven in the most demanding applications. The keyless chuck and software controlled speed rampingprovide easy set up and safe stirring to protect the sample and user. Select from five models with up to200 Ncm torque and up to 100 L volume capacity. INCLUDED: The Ohaus e-A51ST200 Achiever 5000 Overhead Stirrer, 115/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Eurostar 20 Digital Overhead StirrerFeatures - Digital speed display - Infinitely adjustable spe (more)ed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 20 Digital Overhead Stirrer includes: - EUROSTAR 20 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 20 Digital Overhead Stirrer SpecificationsStirring quantity max. per stirring position (H2O)15 lMotor rating input70 WMotor rating output42 WMotor principleBrushless DCSpeed displayLEDSpeed range0/30 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft20 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.2 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input70 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Heidolph 036300340 Overhead Stirrer Impeller, BR 11 Straight-Blade Due to its blade dimensions, the  (more)straight-blade impeller BR 11 is ideally suited for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 100 mm, ideal ground clearance: 5 mm, ideal filling level: 100 mm, and ideal volume: 800 ml. The straight-blade impeller BR 11 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300340 Overhead Stirrer Impeller, BR 11 Straight-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark OS20L Overhead Stirrer, 20L includes stand, and 4 arm propeller, 115V Mixing Capacity (H2O (more)) 20L Maximum Torque 40Ncm Maximum Viscosity 10,000 mPas Features - High torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples - Protected from damage by sensors that shut down operation in the case of high viscosity or obstruction - LCD control panel - Includes complete stand assembly - Compact and quiet - Digital accuracy and convenience - Supplied with a 4 arm stainless steel propeller - 2 Year Manufacturer's Warranty

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

Randox RX Daytona Automated Biochemistry Analyser This item was removed from a university where it w (more)as surplus to requirement. The item is in good cosmetic condition and powers on. It pairs successfully with a PC and software, but unfortunately, we are unable to test further at our facility. Includes:-Dell Monitor - Fully operational-Dell Optiplex 5040- Fully operational-Software-Keyboard-Computer Mouse Model- Dell LCD MonitorModel Number- E17155cS/N-CN-0GYDXK Model- Dell Tower Optiplex 5040S/N- 6B00NK2

One Control Unit Manuf.: Bruel & Kjaer Model: WB0845 Instrument is designed to interface signals bet (more)ween BK 2134 and an ScopeThe skiilled buyer will either know application of this useful interfacing module cosmetic condition is excellent, function 100 % tested

Balance of the AS X2 PLUS series is an advanced analytical weighing device of the SYNERGY LAB line.  (more)The AS X2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 5” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X2 PLUS analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X2 PLUS balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X2 PLUS balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X2 PLUS balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS PLUS balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }