AREX 5 Digital Velp with probe Pt100

Powerful stirring for your lab reactions AREC features state-of-the-art heating plate technology, de (more)signed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC to the Cloud Ermes system.

Ceran hotplate with separate control 11 SR 500°C New equipment in its original packaging Reference:  (more)11 SR 500°C CERAN, an exceptional glass ceramic, is very resistant to breakage, temperature changes, deformation, UV permeable and very resistant to acids. The temperature is controlled by an electronic NiCr-Ni temperature controller (adjustment range 50...500°C), which is installed in a die-cast aluminum housing. Heating time up to 500°C in approximately 8 minutes. External dimensions (L x H x D) (Hot plates): 290 X 100 X 290 MM Weight (heating plates): 5.5 kg Plate shape: square Plate dimensions: 280 x 280 mm Height (heating plate): 100 mm100 mm Power (heating plate): 2000 W Material (plate): ceran Voltage/frequency (heating plates): 230 V AC Max temperature (hot dish): 500°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Temperature control: continuously adjustable from room temperature to 300°C Speed: continuously adju (more)stable from 80 – 1600 rpm Stirring amount: 10 L Dimensions (WxDxH): 150 x 150 x 100 mm Diameter of the heating plate: approx. 130 mm Weight: 2.5 kg

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

F2 Mass Standard - knob weights, service case. Nominal value - 250 kg.

Polyscience AD20H200-A11B 20L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz3 (more)D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD20H200-A11B 20L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD20H200-A11B 20L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic BA310E LED Trinocular Compound Microscope Based upon the successful BA310 microscope, the Moti (more)c BA310 Elite was designed for use in universities, clinics and laboratories. With many improvements over its predecessor, the BA310 Elite was created to offer versatility and ease of use, all in a cost effective and durable package. The BA310E features a fully interchangeable illumination system, enabling multiple styles with the same microscope. While maintaining the full Koehler illumination feature, users can easily switch from a 6v/30w Halogen lamp, to a 3w LED. Furthermore, Motic offers LED lamps with two different color temperatures – 4500K and 6000K. The BA310E also includes Motic’s new EC Plan Achromat objectives. The EC series feature increased working distances, greatly reducing sample contamination when switching from oil to dry lenses. And with significantly improved field flatness and resolution, these provide a fully corrected intermediate image without colored fringes. This microscope can also be easily upgraded for additional modes of operation. Motic offers optional hardware and optics for polarization, phase contrast as well as darkfield. Please see the tab labeled “Accessories” for a full selection of objectives, sliders, and much more. Digital documentation is easily performed with any of Motic’s C-mount cameras, the Moticam. Ranging from 1.3MP to 10MP, these make a perfect accessory for your trinocular microscope, making quick work of analysis and documentation. All Moticams deliver sharp live images, have easy post capture handling, and include all necessary software. And for those wishing to use a traditional SLR camera, Motic offers a full line of adapters and photo eyepieces.Click Here to View Product Video INCLUDED: The Motic BA310E LED Trinocular Compound Microscope includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - Illumination - 5 Year Manufacturer's Warranty