QP - SAULAS Stainless Steel Test Sieve 200x50mm

Thermo Scientific 852-00 Universal Uniguard Holder Halter 2.1/3.0 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€50.00 ex VAT

€59.50 incl. VAT if applicable

Germany

general laboratory equipment other

Irori AccuTag 100 Scanning Station Model: At-100-CS-CE Lab

This Irori AccuTag 100 Scanning Station  Model: At-100-CS-CE was removed from a university lab (more)where it was surplus to requirements. The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals. The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection. Also included are the following:1x AccuTag Synthesis Manager Version 1.01x AccuTag Synthesis Manager Version 2.2612x Irori Radio Frequency Tag1x PSU1x DE-9 cable

£820.00 ex VAT

United Kingdom

microarray scanners, labelling equipment

Varian SPS-5 Autosampler

For sale: refurbished Varian SPS-5 Autosampler Also available: SPS3 sampler and other options if n (more)eeded Other Atomic Absorption Systems like Varian 220FS, 220Z Furnance, 240Z Furnance, Perkin Elmer series New and used parts for Agilent and Varian AAS systems We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services by our own engineers The SPS-5 Sample Preparation System is a random-access autosampler which can be connected to all of the AA, ICP and UV spectrometers currently manufactured by Varian. It can hold up to 500 samples when the optional rear rack extension is fitted. A fume hood is also available. A range of rack types is available for different test tube sizes. Rack hole sizes can be further customized with the 60 position (Type 25) rack for different test tube diameters. The SPS-5 is compatible with the optional on-line Auto-Diluter. The SPS-5 autosampler includes rinse station, two racks (Type 25 and Type A) and inert probe. Standard configuration allows up to three sample or standard racks to be used at once. With the optional rack extension, up to five racks may be accommodated. Racks must be ordered separately. The autosampler requires but does not include test tubes/bottles. The SPS-5 is also available in a fibreoptic autosampler version for use with the Cary 1, 3, 4, 5, 50, 100, 300, 400 and 500 with the Cary WinUV software. Version 2 of the WinUV software does not support use of the SPS-5 with the normal liquid sampling probe nor does it support the optional Diluter. Rack recognition To reduce the risk of operator error, the SPS-5 features Magnetic Rack Recognition (MRR). Each rack has an embedded magnet which is detected by sensors in the SPS-5. The SPS-5 can detect rack presence and type, minimizing the risk of operator error during rack changes. Rack types The SPS-5 can be fitted with five different rack types, catering for a range of sample vessels: Rack type Capacity Tube volume (nominal) Type 10 100 10 mL Type 25 60 25 mL Type 50 35 50 mL Type A 12 125 mL Type B 6 500 mL The Type 25 rack can be fitted with adapters to hold small diameter test tubes. The Type A and B racks are supplied with vessels. All racks are made from chemical-resistant polypropylene. Probe height The height of the SPS-5 probe can be programmed so that you can sample from a particular layer in a sample or avoid aspirating sediment from the bottom of a vessel. Diluter An optional Diluter can be fitted to the SPS-5. This can be used for off-line standard and sample preparation prior to a run. It can also be used to perform on-line dilutions for some techniques.The Diluter’s design ensures that the syringe is never contaminated. After dispensing any solution into a sample vessel, the SPS-5 will mix the contents with the probe. The probe is simultaneously vibrated horizontally and moved up and down through the solution. Splashing is eliminated as the probe height is set in response to the volume in the vessel.

Netherlands

automated liquid handling

Stainless Steel Locker Cabinet

€999.00 ex VAT

Netherlands

general laboratory equipment other

Anton Paar DMA 4100 M Densitymeter

DMA 4100 M delivers the 4-digit density values you need and is not affected by your working environm (more)ent and workforce. It applies the patented Pulsed Excitation Method to deliver the most stable density results based on comprehensive knowledge of the oscillation characteristics. This method results in viscosity correction which is twice as effective as anything else available on the market. The integrated camera allows you to check the filling procedures of your operators at any time and also at the end of the working day. The patented condition monitoring ensures that frequently changing users with differing filling approaches, humidity, temperature fluctuations, air pressure, and instrument condition all have no effect on the operation and results – built-in intelligence for your convenience. Measuring range: Density; 0 g/cm³ to 3 g/cm³, Temperature; 0 °C to 100 °C, Pressure; Up to 10 bar Repeatability: Density; 0.00001 g/cm³, Temperature; 0.02 °C Reproducibility: Density; 0.00005 g/cm³ Accuracy: Density: 0.0001 g/cm³, Temperature; 0.03 °C Digital Resolution: 0.0001 g/cm³ Integrated tables and functions: Alcohol tables, Extract/sugar tables, API functions, Acid/base tables, 150 freely programmable tables/user functions (tables, polynomials, formulas, linear functions, and constants) Minimum sample amount: approx. 1 mL Measuring time per sample: 30 seconds Data memory: 1000 measurement results Interfaces: 4 x USB, RS-232, CAN, VGA, Ethernet Wetted parts: PTFE, borosilicate glass Industries: Beverages, Chemical Industry, Cosmetics, Personal Care, Electronics, Environmental, Food Industry, Petroleum Industry, Pharmacy, Medicine, Biotechnology Dimensions (LxWxH): 495 x 330 x 230 mm Weight: 22.5 kg

€5,499.00 ex VAT

Netherlands

general laboratory equipment other

Radwag AKM-2.20.5Y Automatic Mass Comparators

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

€51,669.00 ex VAT

Poland

mass comparators

SAULAS Stainless Steel Test Sieve 200x50mm - 630 µm

Description from the supplier