Polymax 2040 shaker

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform GENIE Temp-Shaker 300 with Flask Cla (more)mp Platform provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps The Scientific Industries SI-150 (more)0 Orbital Shaker with Ratcheting Clamps is a heavy duty orbital shaker with flexibility for a variety of vessels on a single platform. The SI-1500 offers whisper quiet operation with fully programmable options. Control speed from 10 RPM to 300 RPM with fully programmable time, reversing time, acceleration and deceleration, orbit reversing, etc. Customizable mixing action allows for anything from a smooth vortex to sloshing aeration. Programmable ramping allows for gentle stirring increase to preserve samples and avoid spills. INCLUDED: The Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps includes: - 2 Ratcheting Cushioned Clamps - 1 Non-Ratcheting Cushioned Clamp - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA KS 130 Control NOL Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm (more) Features - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - All functions can be controlled and documented withlabworldsoft® - Special version with reverse rotating direction on request - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control NOL open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The electronic adjustment of speed and timer ensures precise control, and the digital display provides easy readability of speed, timer function, and operating modes. Additionally, all functions can be controlled and documented with labworldsoft®, enhancing its versatility and convenience in any laboratory setting.

This listing is for a Hanna HI93703C Logging Turbidity Meter. The unit is in full working condition (more) and is ready for immidate realese. The Hanna HI93703 Series Logging Turbidity Meters are advanced, microprocessor-based instruments designed to provide laboratory-level precision for turbidity measurements in field conditions. Perfect for environmental monitoring, water quality testing, and various industrial applications, these meters offer an easy and accurate solution for on-site turbidity testing. With its dual operating ranges, the HI93703 ensures versatility for measuring varying levels of turbidity, making it an essential tool for researchers, engineers, and quality control personnel. Key Features: Dual Operating Ranges: The HI93703 series features two measurement ranges: 0.00 to 50.00 FTUs for low turbidity and 50 to 1000 FTUs for high turbidity, accommodating a wide array of sampling conditions. Easy Calibration: The meter allows for straightforward 3-point calibration using AMCO-EPA standards, ensuring accuracy and compliance with ISO 7027 protocols. Enhanced Data Logging: The HI93703-11 model includes a real-time clock and the capability to log up to 199 measurements, facilitating efficient data collection and monitoring. Data Management: Collected data can be easily downloaded to management systems using the Windows® compatible HI92000 software, allowing for comprehensive data analysis and reporting. Good Laboratory Practice (GLP) Compliance: Both versions meet GLP requirements, ensuring last calibration data storage for regulatory adherence. Specifications: Measurement Range: 0.00 to 50.00 FTU 50 to 1000 FTU Resolution: 0.01 FTU (for 0.00 to 50.00 FTU range) 1 FTU (for 50 to 1000 FTU range) Accuracy: ±0.5 FTU or ±5% of reading (whichever is greater) Calibration Points: 3 points (0 FTU, 10 FTU, and 500 FTU) Light Source: Infrared LED Light Detection: Silicon Photocell Battery Type / Life: 4 x 1.5V AA batteries Approx. 60 hours of continuous use or 900 measurements Automatic shut-off after 5 minutes of non-use Operating Environment: Temperature: 0 to 50°C (32 to 122°F) Humidity: RH max 95% non-condensing Dimensions: 220 x 82 x 66 mm (8.7 x 3.2 x 2.6 inches) Weight: 510 g (1.1 lb.)

Self-centering weighing pan of a floating nature is intended for HRP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the HRP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass.

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.15R – resistive touch screen technology. Protection class IP67. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material).

Ohaus 30130873 12 x 5ml Fixed Angle Rotor The Ohaus 30130873 12 x 5ml Fixed Angle Rotor accommodates (more) a capacity of up to 12 x 5 ml. This rotor is designed for use with Ohaus FC5515. and FC5515R series centrifuges. The Ohaus 30130873 Fixed Angle Rotor reaches a maximum speed of 15,500 RPM and a maximum Relative Centrifugal Force of 19,978 x g. INCLUDED: The Ohaus 30130873 12 x 5ml Fixed Angle Rotor includes: - Ohaus 30130873 12 x 5ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tube diameter: 18, 24, 29, 34 mm

Displacement (50Hz): 504 l/min Speed (50 Hz): 25 m3/h Nominal rotation speed (50Hz): 1500 rpm Ultima (more)te vacuum (partial): 10-4 mbar Ultimate vacuum (total pressure) without gas ballast: 2 x 10-3 mbar Ultimate vacuum (total pressure) with gas ballast: 1 x 10-2 mbar Max permitted pressure at outlet: 0.5 bar Max inlet pressure for water vapour: 30 mbar Max water vapour pumping rate: 0.55 kg/h Oil capacity: 0.5 – 1.0 l