Ohaus SHHD4550DG Heavy Duty Shaker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Microplate shaker with microprocessor control that can accommodate two or four microplates, deep wel (more)l plates or two microtube racks. Variable speed over a wide range can be adjusted to suit the application; a low speed ensures that the contents of the well are not ejected, more vigorous stirring provides effective aeration over the small surface area of each of the wells. Ideal for use in immunology, biotechnology, microbiology and pharmacology applications. Two independent LED displays show speed and time Integrated timer, 1 s to 160 hours, shows elapsed time or counts down, automatic switch-off and acoustic alarm when program is completed Can be used at −10 to +60 °C (80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold room Speed: 100 – 1200 rpm Speed accuracy: ±2% Circular movement: 3.0mm Number of places for microplates: 4 Dimensions (WxDxH): 280 x 430 x 100 mm Weight: 10 kg

Ohaus SHHD2325AL Heavy Duty ShakerThe OhausSHHD2325AL Analog 23 kg Capacity Heavy Duty Orbital Shake (more)r is designed forapplications with heavy duty loads. Shaker provides reproducible motion that isevenly distributed throughout the entire surface of the tray.With a loadcapacity up to 50 lbs and over 70 accessory options and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD2325AL.Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD2325AL Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

IKA Rocker 3D Basic Shaker Type of Movement Tumbling Speed Fix 30 RPM Shaking Diameter 8° Features  (more)- Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 30 rpm (fixed) Shaker with three-dimensional tumbling motion and a fixed speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Ideal for e.g. the cultivation of cell cultures, DNA extractions, distributing of cells, and staining and destaining of cells. Even with load and voltage fluctuations, shaking speed remains constant. A fixed angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker also includes an anti-slip rubber mat and easy operation with a touch keypad, making it suitable for continuous operation.INCLUDED: The IKA Rocker 3D Basic Shaker includes: - RD 1 universal mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Rocker 3D Basic Shaker Specifications Type of movementtumblingPermissible shaking weight (incl. attachment)2 kgPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating modecontinuous operationTumbling angle fixed 8 °Shaking platform stackable yesAltitude (when shaking platform stacked)30 mmDimensions (W x H x D) 280 x 165 x 330 mmWeight2.2 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationRocker 2D BasicRocker 2D DigitalRocker 3D BasicRocker 3D DigitalType of movementrockingrockingtumblingtumblingPermissible shaking weight (incl. attachment)2 kg2 kg2 kg2 kgSpeed range5 - 80 rpm5 - 80 rpmfixed 30 rpm5 - 80 rpmSpeed control1 RPM steps1 RPM stepsN/A1 RPM stepsTimernoyesnoyesTime setting min.N/A1 sN/A1 sTime setting max.N/A5999 minN/A5999 minRocking/Tumbling anglefixed 8°adjustable 2.5 - 15°fixed 8°adjustable 0 - 15°Shaking platform stackableyesyesyesyesDimensions (W x H x D)280 x 150 x 330 mm280 x 150 x 330 mm280 x 165 x 330 mm280 x 185 x 330 mmWeight2.2 kg2.2 kg2.2 kg2.3 kgVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Mettler RS-P42 Printer. The unit is in full working condition and is ready fo (more)r immidate realese. The Mettler Toledo RS-P42 Printer is a compact and reliable dot matrix printer designed for use with Mettler Toledo balances and analytical instruments via an RS232C interface. It provides fast and efficient documentation of weighing results, including regular adjustments and specific application data. With a small footprint, it produces 5 cm wide printouts, making it easy to include results in lab journals. The RS-P42 is ideal for labs needing GLP, GMP, and ISO-compliant documentation. Key Features: Dot matrix printing (24 characters/line) Print speed: over 1 line per second RS232C connectivity for easy integration with balances Compact design for space-saving use in laboratories

Sanyo MDF-U74V Ultra Low Temperature Freezer This was removed from a university lab where it was sur (more)plus to requirements. It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C. It is in good cosmetic condition with minor marks from use.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.