Ohaus SHHD2325AL Heavy Duty Shaker

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Display Independent LED displays allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

Ohaus SHRK04DG Rocking ShakerThe OhausSHRK04DG Digital Rocking Shaker is ideal for cell culture work (more) and is designedto be used in a variety of environmental conditions.The SHRK04DGis designed for use in a range of lab applications in a variety ofenvironmental conditions. Rocking Shakers provide a seesaw-like motion. Themicroprocessor-controlled digital models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows for electronic tilt angle adjustment in 1° increments for tiltand 1 rpm for speed.Digitalmodels are equipped with LED displays and touchpad controls for speed, tiltangle and time. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHRK04DG Rocking Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex SK-L180-Pro Linear LCD Digital ShakerThe Scilogex SK-L180-Pro Linear LCD Digital Shaker fea (more)tures a backlit LCD display for speed and timer, maximum load of 5.5lbs, 100-350 rpm shaking speed range, and timer or continuous operation. Click Here to View Product Video INCLUDED: The Scilogex SK-L180-Pro Linear LCD Digital Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036130610 Hei-SHAKE Orbital Core 2000 Speed Range 1 to 530 RPM Maximum Load 33.1 lb. (15 k (more)g) Platform Size 15.3 x 13.4 in. (39 x 34 cm) Features - Adjustable timer from 1 minute to nearly 1000 hours for continuous and timed operations - Integrated RS232 interface for remote control via Hei-PROCESS software - Efficient EC motor ensuring reliable performance - Quiet operation under 85 dB for a comfortable laboratory environment - User-friendly menu featuring automatic restart after power failures - Versatile design tailored for a variety of laboratory shaking applications The Heidolph 036130610 Hei-SHAKE Orbital Core 2000 is a high-performance orbital shaker designed to meet the demands of laboratory applications. It features a broad rotation speed range from 1 to 530 rpm, an adjustable timer spanning from 1 minute to 999 hours 59 minutes, and an integrated RS232 interface for seamless remote control via PC or Hei-PROCESS software. Equipped with an integrated shaker platform and the flat rubber mat 2000—both included—this model offers a 71.5% increase in surface capacity compared to the standard Hei-SHAKE Orbital Core, enhancing sample accommodation and workflow efficiency. Its 20 mm orbital shaking motion ensures uniform media distribution, while the system supports both continuous operation and timed shaking. A user-friendly menu allows for easy operation, including an automatic restart function that ensures uninterrupted performance following power interruptions. INCLUDED: The Heidolph 036130610 Hei-SHAKE Orbital Core 2000 includes: - Platform 2000 Rubber Mat - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your samples. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university la (more)b where it was surplus to requirements. The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching. There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver. Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta The remote control was tested and is in working order.

This Rheodyne MXT715-000 Switching Valve was removed from a university lab where it was surplus to r (more)equirements. The unit powers up with the included PSU. It has not been tested further. It is in good cosmetic condition with minor marks from use.

Jouan Refrigerated Trap And Concentrator Evaporator Lab This system was removed from a university la (more)b, where it was surplus to requirements. All units are in good cosmetic condition and powered on. It's in good working order. The system comprises the following: - KNF Neuberger Pump - Jouan RCT90 Cold Trap - Jouan Type RC 10.22 Vacuum Concentrator Centrifuge

Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illuminatio (more)n Objectives S-APO S-APO BD 5X, 10X, 20X, 50X Objectives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design to guarantee efficient use of limited laboratory space. - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities limit operator fatigue during extended periods of operation. - Innovative Module Design. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET-BD-T is an advanced trinocular metallurgical microscope designed for both bright field and dark field observation. It features a reflected intermediate illumination system and a powerful 100W halogen lamp, complemented by a transmitted illumination system with a Long Working Distance (LWD) condenser. The microscope includes widefield eyepieces with 10X magnification and a 25mm field of view. Its coded quintuple revolving nosepiece supports bright field and dark field (BD) and features a slot for Differential Interference Contrast (DIC). Plan S-APO BD objectives are available in 5X, 10X, 20X, and 50X magnifications. The PA53MET-BD-T is highly modular, allowing future upgrades for motorized components, including a motorized stage for low magnification tiling of large samples. INCLUDED: The Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illumination includes: - S-APO S-APO BD 5X, 10X, 20X, 50X Objectives - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).