Ohaus Endeavor 5000 Series e-E51LD0420 AM Light Duty Orbital Shaker

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

Speed range: 150 – 1,350 rpm Speed control: analogue Timer: up to 120 minutes, continuous Maximum pe (more)rmissible load: 2 kg Movement: circular Orbit: 1.5 mm Dimensions (WxHxD): 245 x 125 x 310 mm Weight: 5.5 kg

This variable speed shaker with a large platform is ideal for gentle mixing. This model is equipped  (more)with an LED display, while the speed and time are controlled via a knob. The oscillating wave motion is ideal for washing and blotting procedures. The non-slip mat keeps the containers in place. Digital setting and display of speed and time Can be used at 4 to 40 °C (80% relative humidity, non-condensing) in an incubator or cold room Continuous or timer operation: integrated digital timer for 1 s to 90 min. or for 1 min. to 9 h; with automatic switch-off and display of the remaining time BioCote antimicrobial protection Shaking motion: Rocking wave motion Speed ​​range: 5 – 70 rpm Angle: 7° (fixed) Plateau (WxD): 355 x 355 mm Maximum load: 10 kg Dimensions (WxDxH): 360 x 420 x 160 mm Weight: 10 kg

This New Brunswick Innova 4300 Incubator Shaker was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). The shaking plate has also been tested. The system is in full working order. It is in reasonable cosmetic condition with marks from use. Internal dimensions - L88 W56 D34cm

Ohaus SHRK04DG Rocking ShakerThe OhausSHRK04DG Digital Rocking Shaker is ideal for cell culture work (more) and is designedto be used in a variety of environmental conditions.The SHRK04DGis designed for use in a range of lab applications in a variety ofenvironmental conditions. Rocking Shakers provide a seesaw-like motion. Themicroprocessor-controlled digital models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows for electronic tilt angle adjustment in 1° increments for tiltand 1 rpm for speed.Digitalmodels are equipped with LED displays and touchpad controls for speed, tiltangle and time. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHRK04DG Rocking Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISLDMPHDGL Incubating Shaker The Ohaus ISLDMPHDGL Incubating Light Duty Shaker with Opaque Lid (more) is designed to incubate samples from 5° ambient to 65° C depending on the model are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks and comes with an opaque lid for light sensitive samples. The ISLDMPHDGL features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLDMPHDGL Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLDMPHDGL Incubating Shaker Specifications Temperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Continuous or push control Dimensions (HxWxD): 120 x 120 x 160 mm Weight: 3.5 kg

RMC CR21, CR21 Control, Transformer & Cryochamber Lab These items were removed from a university (more) where they were surplus to requirement. All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.Therefore, this listing is sold as Spares/Repair. All items included are as follows: Model1#: CR21 ControllerSerial1#: 10521389 Model2#: CR21 Transformer BoxSerial2#: 10521391 Model3#: CR21 CryochamberSerial3#: 10521390

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.