IKA Roller 6 Basic Shaker

This item has just arrived in our stock. Please enquire for further details.

VC 10 lite Input Pressure 1 to 1,050 mbar Measurement Range 1 to 1,100 mbar Temp. Measuring Max. 200 (more)°C Features - Valve cleaning function for long service life - High energy efficiency thanks to device-to-device communication: control of the circulator by connecting the vacuum controller with PC 1.3 data cable (available as accessory) - Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion - VENT short key button allows pressure equalization during a running process - Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences - USB / RS232 interfaces for connection with the laboratory software labworldsoft® - Electronic control system for improved process efficiency and higher solvent recovery rate - High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller) The IKA VC 10 lite VC 10 Vacuum Controller is a highly efficient and versatile device designed for optimal vacuum control in laboratory settings. It features a valve cleaning function for long service life and high energy efficiency through device-to-device communication. The controller can connect to a circulator via a PC 1.3 data cable (available as an accessory) for enhanced control. It includes an integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion. The VENT short key button allows pressure equalization during a running process. The program function supports up to ten user-defined programs with up to ten pressure/time sequences. Equipped with USB and RS232 interfaces, it easily connects with the lab software labworldsoft®. The electronic control system improves process efficiency and solvent recovery rate. The device supports a wide range of connection diameters and pressure units and features a ceramic Al2O3 vacuum sensor for accurate measurements. With a control range of 1 - 1100 mbar and a resolution of 1 mbar, it ensures precise vacuum control. The vacuum controller also includes a timer, temperature measurement capabilities, and a graph function. Compact and lightweight, with dimensions of 95 x 150 x 110 mm and a weight of 1.284 kg, it is suitable for various laboratory applications, offering robust performance and user-friendly operation.INCLUDED: The IKA VC 10 lite VC 10 Vacuum controller includes: - VC 10 lite - USB Cable - USB A to Micro-B, 2 m - Two Year Manufacturer's Warranty

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300×300 mm (A x B).

Leica MZ95 Microscope System & K Systems IVF Workstation  L224 LAF The system has been tes (more)ted and all modules are in full working order. Everything is in good cosmetic condition with minor marks from use. Included are; K Systems IVF WorkstationType - L224 LAFSN - 11100161Internal workspace - L122 W50 H71cmHeating function is working. Microscope:-Leica MZ952 x Leica Eye Pieces 10x/21B (10447160)Leica Plan 1.0x (10446275) K Systems Lamp (fitted underneath)Type - LS14SN - 11010194 RI IVF Witness Heated Control UnitSN - 862 RI IVF Witness Box with cables and stand

This Ventana 750-200 Discovery Slide Staining System was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further at our facility. It is in reasonably good cosmetic condition with minor marks. Includes: -Instruction manual-Discovery software manual-Discovery 10X EZ prep solution (expired on 28/12/2017)-RiboWash bulk reagent (expired on 31/12/2008)-Reaction buffer concentrate (10x) (expired on 30/6/2019)-7 x reagent bottle modules for unit-8 x spare reagent bottle modules-Relevant cables-Temperature verifier slides (expired on 30/4/2020) Item is missing waste module

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration

The Qubit fluorometer uses the very latest in illumination and detection technology for the highest  (more)sensitivity, you can use as little as 1 µL of sample and still get great results, even with very dilute samples. Dynamic range: 5 orders of magnitude Light sources: Blue LED (max ~460 nm), Red LED (max ~635 nm) Excitation filters: Blue 400 – 490 nm, Red 570 – 645 nm Emission filters: Green 510 – 580 nm, Red 655 – 725 nm Photodiode detectors: 300 – 1000 nm Calibration: 2 or 3 point standard Tube type: 500 µL clear tubes Warm up time: 2 sec Dimensions: 114 x 166 x 46 mm Weight: 219 g

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).