IKA KS 501 Digital Shaker

New Brunswick Innova 4300 Incubator Shaker This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. It functions well, although it is slow to reach the set RPM. Includes: - Flask Mounts with Fittings - Test Tube Holding Racks

Benchmark H3020 Incu-Shaker 20L Stackable Shaking Incubator Speed Range 30 to 300 RPM Temperature Ra (more)nge Ambient +5°C to 60°C Temperature Uniformity ± 0.5°C at 37°C Features - Stainless steel chamber provides premier temperature uniformity - Proven reliable, maintenance-free Incu-Shaker motor drive system - Bright, intuitive touch-screen controls - Instantly change flask clamps with MAGic Clamp accessories - Included pull-out adjustable shelf for static incubations - Stacking capability of up to 2 units - 2 Year Manufacturer's Warranty

Ohaus SHHSMPDG High Speed Microplate Shaker, 120V Speed Range 600 rpm to 2,500 rpm Maximum Capacity  (more)48 Microplates Orbit 3.6 mm Features - Sturdy, adjustable top plate secures up to 48 microplates, 6 deep well plates or small tubes less than 5 in. (12.7 cm) tall up to 7 lb. (3.2 kg). - For difficult to mix samples or to prevent overheating samples while shaking, the Pulse Feature can be adjusted to Pulse ON and Pulse OFF between 1 and 59 second intervals. - Independent LEDs and Touchpad Control for Speed and Time allow you to accurately reproduce the exact settings every time. High Speed Microplate Shaker provides variable high speed shaking from 600 to 2500 rpm formicroplates, deep well plates, and small diameter tubes up to 5 in. (12.7 cm) tall. Programmable pulse feature with adjustments for pulse ON and pulse OFF intervals of between 1 and 59 seconds. Program timer to count down from set time and turn off when timer reaches zero, or to run in continuous mode as timer counts accumulated time until user turns it off. INCLUDED: The Ohaus SHHSMPDG High Speed Microplate Shaker, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries Orbital-Genie Shaker w/ Adhering Mat Benchtop Orbital Shaker equipped with an  (more)adhering mat providing a flat platform with adhering rubber mat perfect for use with open containers. Patented material is naturally adhering. Rinse clean to renew adhering properties.Scientific Industries Orbital-Genie Shaker w/ Adhering Mat Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

High speed microplate stirrers Reliable new product from Ohaus. Simple and easy to use with dual dis (more)plays for time and speed. The High Speed ​​Microplate Shaker offers variable high speed stirring from 600 to 2,500 rpm, pulse function, 1 second to 160 hour timer and RS232 communication. - Sturdy adjustable plate: you can attach up to 48 microplates, 6 deep wells or small tubes less than 12.7 cm high, for a maximum weight of 3.2kg - Programmable pulse function: allows you to adjust the pulse sending times from 1 to 59 seconds; useful for samples that are difficult to mix, or to avoid overheating of the samples during stirring - Independent LEDs and control touchpad for speed and time Applications Cell lysis, emulsions, microplate mixing Display Independent LED displays for speed and time Communication RS-232 Structure Die-cast aluminium Construction features The programmable pulse function allows you to adjust the pulse sending times from 1 to 59 seconds. You can program the countdown timer from the set time, and the unit turns off when the timer reaches zero, or you can opt for continuous mode operation, where the timer counts the accumulated time until the user turns off the unit.

Vortex Shaker Uzusio LMS VTX-3000L New equipment in its original packaging 2 modes: continuous rotat (more)ion or pulse rotation speed from 20 to 3000 rpm Dimensions (L x W x H): 130 x 155 x 155 mm Power supply: 220 vAC, 50 Hz., 20 W

Yamato SDP-400 Vacuum Oven 127.4L, 110-120V Operating Temperature Range +10-220°C Operating Pressu (more)re Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Discover the ultimate solution for precise temperature control and reliable vacuum performance with the SDP Series Vacuum Oven, now available in SDP400 and SDP410 models. Offering an impressive operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, this oven is a versatile addition to any laboratory. The EZ-ZONE Watlow controls ensure ease of operation, and the KF25 access port provides convenient access. Enjoy exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.2°C at 80°C, ± 0.25°C at 150°C, and ± 0.3°C at 220°C. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior features 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W457 x D610 x H457 mm provide ample room for your samples. With a generous internal capacity of 127.4L, six sturdy shelves, each capable of holding up to 15.8 kg, and a maximum total load of 47.6 kg, this oven is ideal for a wide range of applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 13A or AC220 - 240V 7A) and is a robust and dependable workhorse for your lab, weighing in at ~144kg. It comes complete with three shelves, 12 shelf clips, a power cord, and four leveling feet, making it an essential asset for your laboratory needs.INCLUDED: The Yamato SDP-400 Vacuum Oven 127.4L, 110-120V includes: - 3 Shelves - 4 Leveling Feet - 12 Shelf Clips - Power Cord - One Year Manufacturer's Warranty

Dimensions (HxWxD): 1750 x 1160 x 520 mm

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW