IKA KS 260 Control Shaker

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

New Brunswick Scientific G-25 Foor Standing Incubator Shaker This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs. Shaker platform - 76 x 46cm

Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood  (more)Speed Range 150 to 1,350 RPM Temperature Range Ambient +5°C to 65°C Platform Size 290 x 258 mm Features - Used for research requiring rigid or gentle shaking on microtiter plates or test tubes - Includes safety features, ease of use, and increased efficiency - Insulated system prevents heat transfer from the motor, safeguarding samples - Suitable for the modular incubator system with variable temperature control up to 65°C - Medium-sized model with a load capacity of 5kg - Accepts 6 microtiter plates for increased throughput - 1.5mm vibration orbit for gentle mixing with small sample volumes - Analog process timer for unattended operation (1 to 120 minutes) - Acoustic alarm and automatic stop after the set time expires - Variable speed control (150 to 1,350rpm) via analog knob This Tritramax package includes one vibrating platform shaker Titramax 1000, one heating module and one flat incubator hood. Titramax 1000, the incubating model platform shaker, is used for research which requires ridged or gentle shaking for small samples on microtiter plates or test tubes. Includes all standard features for safety, ease of use and increased efficiency. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65° C. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. It is a medium sized model and accepts load capacities of 5kg. The use of 6 microtiter plates increases your throughput by 50%. The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes. The analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped. Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350rpm. The small incubator hood comes with a total height of 163mm and is recommended especially for microtiter plates, culture plates, small flasks, media bottles and Erlenmeyer flasks up to 100ml. The transparent and non-fogging PETG material allows for sample viewing and is easily cleaned. Click Here to View Product Video INCLUDED: The Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood includes: - Titramax 1000 Shaker - Heating Module - Flat Hood - Power Cord - Three Year Manufacturer's Warranty

IKA KS 260 Control Shaker Type of Movement Orbital Speed Range 0 to 500 RPM Shaking Stroke 10 mm Fe (more)atures - Electronic adjustment of speed and timer - Digital display makes it possible to read the speed, timer function and operating modes - Electronic time switching clock: 0 - 9 h 59 min or continuous operation (endless) - With integrated end point positioning (for automated robot-controlled sampling) - All functions can be controlled and documented with labworldsoft® - Wide range of attachment combinations makes it possible to use almost all shapes and sizes of vessels - Attachments are not included, please order separately The KS 260 control open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 7.5 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.

Orbital shaker or back and forth KL2 EDMUND BUHLER New equipment in its original packaging Orbital o (more)r reciprocating (horizontal) shaker Platform dimensions: 300 x 300 mm Max load: 2 kg Orbital shaking speed: 30 - 420 rpm Amplitude of agitation back and forth: 8 mm Timer: 0 - 120 min or continuous Delivered with tray with 3 clamping bands

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

This Dionex UCI-100 HPLC System was removed from a university lab where it was surplus to requiremen (more)ts. The system has been professionally serviced. A full report is available on request. All units are in good cosmetic condition. Included in the system are; 1 x Dionex PDA-Photodiode Array DetectorPN - 054101 1 x Dionex Thermostatted Column Compartment TCC-100PN - 5710.0000 1 x Dionex UCI-100 Universal Chromatography InterfacePN - 5911.0010 1 x Dionex Solvent Rack SOR-100PN - 5030.9200 1 x Dionex P680 HPLC Pump LPG-4PN - 5030.0015 1 x Dionex ASI-100 Automated Sample InjectorPN - 5810.0015

Roche LightCycler 480 II/96 PCR Real Time RT-PCR Machine This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but the LightCycler is showing errors during the installation 100900270 - Restart instrument.100600130 - Command not allowed - I believe this error is actually caused by the one above.We have added images of the errors etc, but the computer will not be included.Lamp Absolute Intensity - 9853Operation Time - 572h. It is in good cosmetic condition with minor marks from use. It is sold for spares/repairs. It is supplied with the following accessories. 1x ThermoCycler 96-s (boxed)S/N: 030203P/N: 05015162001 1x ThermoCycler 384 silber (fitted)S/N: (21) 7298P/N: 050154001 1x LightCycler 480 Software CD Release 1.5.0 7x Boxes of 96-well PCR microplatesO/N: I1402-9909 13x Boxes of 384-well PCR platesO/N: E1402-9909 3x 2.5a 20 mm anti surge fuses 1x Maxon Motor (suspected faulty, as mentioned in report) 5x Mains power leads 1x 24 volt power supply

This Waters 70001117 High-Temperature Dual Ion Guide Assembly was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs. Power supply not included.

LMS 400NP Cooled Incubator This item was removed from a university where it was surplus to requireme (more)nt. The incubator is in excellent cosmetic condition and powers on.However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C. Therefore, it is listed as Spares/Repair. Specifications: - Serial No.: 12425/17PP - Capacity: 450 litres - Internal dimensions: 64 x 55 x 118 cm (l x w x h) - Temperature range: -10°C to 50°C - 4 height adjustable shelves (56 x 60 cm) - Factory set auto defrost system

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW