IKA KS 260 Control NOL Shaker

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university la (more)b where it was surplus to requirements. The unit has a power board fault. It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly. Internal dimensions - D52 x W55 x H67cm1 Shelf - 52 x 54cmShaker Plate - 45 x 45cm It is sold for spares or repairs due to the electrical fault.

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA KS 3000i Incubator Shaker Type of Movement Orbital Temperature Setting Range Room Temp. +5° - 80 (more) °C Speed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order separately This innovative incubator shaker enables unattended operation in a precisely controlled environment, featuring orbital movement with a 20 mm shaking stroke and a maximum permissible shaking weight of 7.5 kg. It offers a speed range of 10 to 500 rpm, displayed on an LED screen, and controlled in 1 RPM steps. The unit includes a 7-segment LED timer, adjustable from 1 second to 59940 minutes, and operates in both timer and continuous modes. With a heating range from room temperature +5°C to 80°C and a 50-liter inner chamber, this shaker ensures precise temperature control and stability, ideal for various laboratory applications.

Ohaus ISRK04HDG Rocking Incubating Shaker The Ohaus ISRK04HDG Incubating Rocking Shaker combines smo (more)oth rocking motion and general purpose incubation in one compact bench top unit.The ISRK04HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Rocking shakers provide a see-saw like motion. The ISRK04HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISRK04HDG Rocking Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISRK04HDG Rocking Incubating Shaker Specifications Temperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 50 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 15°Timer1 second to 160 hoursMaximum Weight Capacity10 lbs (4.5 kg)Tray MaterialAluminumTray Dimensions (L x W)10 x 7.5" (25.4 x 19.1 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.8" (27.3 x 19.7 x 9.7 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(6) { background-color: #fffacd; }

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

IKA MS2 Minishaker / laboratory vortex Laboratory use Voltage: 230V, 50-60Hz Power: 31W Stirring fre (more)quency: 0 – 2500 1/min Mini shaker dimensions (L) x (D) x (H): 11.5 x 23 x 8cm Orbital displacement of 4.5 mm Plate dimensions (ø): 7 cm 2 modes: continuous rotation or pulse

Edwards XDS NW40 Inlet/Outlet Filter Edwards XDS NW40 Inlet/Outlet Filter INCLUDED: The Edwards XDS  (more)NW40 Inlet/Outlet Filter includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Dry Block Heater 4 Heating Temperature Range room temp. +5° - 120 °C Number of Blocks 4 Blocks S (more)et-up plate material Aluminium alloy Features - Digital block heater for four aluminum blocks, offering precise temperature control for small vessels - Includes PT-1000 temperature sensor for direct temperature control in the sample vessel - Compatible with PCR tubes, PCR strips, Greiner tubes, microplates, and cuvettes - Features a counter for displaying heating time and a large selection of blocks for versatility - Error code display and fixed safety circuit enhance reliability and safety - Acoustic signal indicates the end of a test for user convenience - Made from aluminum alloy with set-up plate dimensions of 96 x 304 mm Digital block heater for four aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.INCLUDED: The IKA Dry Block Heater 4 includes: - Dry Block Heater 4 - Block remove tool - PT 1000.60 Temperature sensor, stainless steel - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

The 223 Sample Changer is an XYZ robot that can automate sample handling procedures. It is controlle (more)d via a program running on a computer. Dimensions (WxDxH): 535 x 437 x 60 mm Weight: 18.6 kg

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.