IKA KS 260 Basic Shaker

This New Brunswick Innova 4300 Incubator Shaker was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). The shaking plate has also been tested. The system is in full working order. It is in reasonable cosmetic condition with marks from use. Internal dimensions - L88 W56 D34cm

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

Ohaus heavy duty vortex agitators Robust construction and a top quality German-made motor for contin (more)uous operation with accessories across the entire speed range. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: switch A wide range of accessories is available for microtubes, microplates and tubes with sizes from 0.5 to 50ml. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Universal support (code 30400226) Cover for universal support (code 30400225) Foam insert (for 1.5-2.0 ml tubes) (code 30400217) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Structure Cycoloy, Touch / Standby / On rocker switch (both models) Construction features Universal holder with foam insert for (38) 1.5 to 2 mL tubes. Universal lid and cup head (included) Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

IKA KS 260 Control NOL Shaker Type of Movement Orbital Speed Range 0 to 500 RPM Shaking Stroke 10 m (more)m Features - Electronic adjustment of speed and timer - Digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59 min orcontinuous operation (endless) - All functions can be controlled and documented withlabworldsoft® - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included, please order separately The IKA KS 260 Control NOL Shaker is a compact, flat shaker designed for optimal swivel motion, capable of handling a maximum shaking weight of 7.5 kg. It features electronic adjustment of speed and timer, with a digital display that allows easy reading of speed, timer function, and operating modes. The electronic time switching clock supports durations from 0 to 9 hours and 59 minutes or continuous operation. All functions can be controlled and documented with labworldsoft®. The shaker supports a wide range of attachment combinations, making it versatile for almost all vessel shapes and sizes (attachments sold separately). With an orbital movement and a shaking stroke of 10 mm, it operates at speeds from 0 to 500 rpm, displayed on an LCD. The device dimensions are 360 x 98 x 420 mm, and it weighs 8.8 kg, making it a reliable and efficient choice for laboratory applications.

Benchmark Incu-Shaker 10L Shaking IncubatorFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. Features a touch screen control over time, speed, and temperature settings. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10L Shaking Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BioMixer 3D Nutating Shaker The Benchmark BioMixer 3D multi-functional shakers provide a 3 (more)-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The BioMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark BioMixer 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Varian Prostar HPLC Units 430 Autosampler, 2 x 210 Solvent Delivery Modules Lab This system was remo (more)ved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and powered on, the previous client has stated they were in working order prior to removal. This system comprises the following: 430 AutosamplerPart No. 03-935292-12Serial No. 60174Manufacturing year 2006 210 Solvent Delivery ModuleSerial No. 05175Fitted with additional Pressure Module 8700psi 10ml 210 Solvent Delivery ModuleSerial No. 05176

VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.12 Torr) Maximum (more) Pumping Speed 1.65 CFM at 60Hz Number of Heads/Stages 4/4 Features - VACUU·SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Ideal for evaporation of high-boiling solvents even at low temperatures - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent environmental compatibility through low energy consumption and efficient solvent recovery The PC 3003 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. With its high pumping speed and deep ultimate vacuum, this pump is suitable for demanding applications with high boiling point solvents in low temperature conditions. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. And the VARIO control algorithm maintains the desired vacuum level without running the motor faster than necessary. This prevents bumping and foaming, makes the pump whisper quiet, and extends maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. Typical applications are all evaporation processes. They can be run fully automatically by the integrated vacuum controller CVC 3000 resulting in both shorter process times and extra sensitivity at the same time. The excellent ultimate vacuum allows even high boiling solvents to evaporate at low temperatures. The VARIO® control ensures high process reliability through prevention of superheating or foaming. It detects boiling pressures of solvents fully automatically and adapts continuously the vacuum conditions to changing process parameters. All this without any need of parameter input or the use of a solvent library. In many other applications - like in local vacuum networks - the VARIO® control offers a significant advantage by supplying always the appropriate pumping speed. The VACUU·BUS® interface facilitates an user-friendly configuration of even complex vacuum installations.INCLUDED: The VACUUBRAND PC 3003 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Tray for termodesinfectadora Miele O188/2. New to brand new. Valid for models G 7883, G 7893, G 7883 (more) CD, PG 8535 and PG 8536

The flow cytometer CyFlow Cube 6, fully self-contained and ultra-compact, has been designed for all  (more)applications in cell analysis and absolute count with the best ratio quality-performance/price. CyFlow Cube 6 provides a flow cytometry accurate with up to 6 optical parameters. Equipped with a blue and a red laser optional, and 4 fluorescence channels (FL1-FL4) more Forward Scatter (FSC) and Side Scatter (SCC) constitute an optical system, powerful and affordable flow cytometry. PC and software CyView integrated. Optional: automatic Charger optional CyFlow Robby for well plates and tubes. It shows the price for the model CY-S-3060R_V2 - CyFlow® Cube 6 Microbiology - (1 laser 488 nm; 5 parameters). For other configurations, consult drop-down. Features Light sources Up to 2 light sources simultaneous: blue laser 50 mw @ 488; red laser 25mW @ 638nm Optical Optical system, modular PMT of the selected preamplifier built-in for FSC, SSC, FL1-FL4 Optical filters interchangeable Flow system Bucket of flow of quartz for transport of samples laminar and approach to hydrodynamic processes. Count absolute volumetric true (TVAC) based on the measurement of volume mechanical Syringe pump accuracy computer-controlled, speed continuously adjustable from 0-20 ál / sec. Software CyView, software FCM based on Windows ™ for the acquisition of real-time data, analysis of data in real-time and viewing data in real-time Easy configuration of templates experimental (configuration files) Data format Standard for flow cytometry (FCS) for storage of original data and evaluated

Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V Temperature Range Ambient +5°C  (more)to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 56L (2 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180 °C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO50 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. With the K7 active humidity option installed, this CO2 Incubator allows for direct humidity control from 40 to 97% RH, or no RH. Further enhancing its functionality, the ICO50 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO50 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V includes: - 1 x Stainless Steel Perforated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.