IKA HS 260 Basic Shaker

Benchmark Scientific BT30 Orbi-Blotter Variable Speed Orbital Shaker New equipment in its original  (more)packaging Référence : BT 30 Speed: Variable, 3 to 70 rpm Orbit: 19 mm Max. Capacity: 3 x 2L (9 lbs / 4 kg) Platform Dimensions: 14 x 12 in./ 35 x 30 cm Dimensions: (w x d x h) 14 x 12 x 8 in. 35.5 x 30.5 x 20 cm Weight: 7.5 lbs (3.4kg) Electrical: 230V, 50-60Hz, 50W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus SHWV02DG Waving ShakerThe OhausSHWV02DG Digital Waving Shaker provides precise speed control a (more)nd a smooth, lowfoaming, three dimensional, "wave" motion. Ideal for use in a widerange of laboratory applications and designed to be used in a variety ofenvironmental conditions. Tray includes a non-skid rubber mat that is suitablefor holding Petri dishes.The SHWV02DGis designed for use in a range of lab applications in a variety ofenvironmental conditions. Waving Shakers offer a smooth, low-foaming, 3D wavemotion for precise speed control. All models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows for electronic tilt angle adjustment in 1° increments for tiltand 1 rpm for speed.Digitalmodels are equipped with LED displays and touchpad controls for speed, tiltangle and time. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHWV02DG Waving Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Rocker 2D Basic Shaker Speed Range 5 to 80 RPM Type of Movement Rocking Rocking Angle 8° Featur (more)es - Different attachments enable use for a variety ofapplications - Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 5 - 80 rpm Rocking shaker with adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Even with load and voltage fluctuations, shaking speed remains constant. A fixed tilt angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker includes an anti-slip rubber mat and easy operation with a touch keypad. Suitable for continuous operation, it offers a speed range of 5 - 80 rpm with precise control in 1 RPM steps.

IKA KS 4000ic Incubator Shaker Type of Movement Orbital Temperature Setting Range 12°C - 80 °C Speed (more) Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly The IKA KS 4000ic Incubator Shaker combines precise control and user-friendly features, ideal for laboratory applications. It features a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control with dual PT 1000 sensors. The electronic timer switch allows settings from 0 to 999 hours, while the unit includes options for an external cooling connection. Safety mechanisms, such as automatic shutoff when disturbed or hood lifted, ensure reliable operation. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a temperature range from 12°C to 80°C, this shaker provides optimal performance for your lab needs.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scilogex 5L Bath for SC100-Pro Rotary Evaporator The Scilogex 5L Bath is for use with the SC100-Pro  (more)Rotary Evaporator. INCLUDED: The Scilogex 5L Bath for SC100-Pro Rotary Evaporator includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump Ultimate Vacuum 99 mbar Maximum Flow Rate 110L/min (6.6 m (more) 3/h) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette Designed for performance and comfort, PIPETM (more)AN® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 10 µLPipette ModelP10LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(3) { background-color: #fffacd; }Request a Formal Quote

Benchmark Orbi-ShakerXL Orbital Shaker Speed Variable, 30 to 300 RPM Orbit 19 mm (0.75 in) Max Loa (more)d 65 lbs Features - Robust mixing: Variable speed from 30 to 300 RPM for diverse laboratory needs - Effective orbit of 19 mm ensures thorough mixing of samples in flasks - Exceptional capacity: Handles up to 5 x 2L or 9 x 1L flasks simultaneously - Strong load support: Maximum load capacity of 65 lbs (30 kg) for heavy-duty tasks - Precise control: Speed increment adjustments of 1 RPM for specific needs - Large platform dimensions at 17.8 x 17.8 inches (45 x 45 cm) for ample space - Compact yet powerful: Overall size 18.5x21.25x5 inches, using 450W power Your browser does not support the video tag. The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications, while the convenient MAGic Clamp platform is also available for high speed mixing of Erlenmeyer flasks, tube racks or microplates. The MAGic Clamp allows for instant flask clamp exchange without the use of tools, screws or any other hardware.INCLUDED: The Benchmark Orbi-ShakerXL Orbital Shaker includes: - 18 x 18in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty