Heidolph Polymax 2040 (10 tilt angle) Wave Platform Shaker

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

Ohaus SHHD6850DG Heavy Duty Shaker The Ohaus SHHD6850DG Digital 68 kg Capacity Orbital Shaker is the (more) largest capacity shaker designed for the heaviest of loads. They have the most powerful drive mechanism of all the shakers and large orbits for optimal shaking of larger vessels with an orbit of 2 inches. With load capacities from 150 lbs and over 70 accessory options, and with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted. Built-in tray and non-slip rubber mat included with the SHHD6850DG. The exclusive Accu-Drive shaking system on digital models utilizes dual-speed sensors to continuously monitor and maintain shaking speed - delivering exceptional speed control, accuracy & durability. Touchpad controls with independent LEDs for speed/time allow operator to view all settings at once. Timer displays elapsed time or when programmed to a set time, will turn off when time reaches zero. Speed ramping feature slowly increases the speed to desired setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD6850DG Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

IKA Loopster Basic Shaker Type of Movement Rotating Speed Fix 20 RPM Tilt Angle Turntable Max. 90°  (more)Features - Freely adjustable rotary angle - Different attachments allow a variety of applications - Usable at 4 to 50 °C in incubators - Easy operation by foil keypad - Suitable for continuous operation - 20 rpm (fixed) The IKA Loopster Basic Shaker is a versatile and reliable laboratory tool designed for continuous operation with a fixed speed of 20 rpm. It features a freely adjustable rotary angle, making it suitable for a wide range of applications with different attachments. The shaker is usable in incubators at temperatures ranging from 4 to 50 °C, and its easy operation via a foil keypad ensures user convenience. Capable of handling a permissible shaking weight of 2 kg, it operates with a rotating movement and offers a tilt angle turntable range from 0° to 90°. The compact dimensions of 300 x 360 x 300 mm and a weight of 3.644 kg make it an efficient choice for various laboratory settings. Built to IP 21 protection standards, the Loopster Basic Shaker operates on a voltage range of 100 - 240 V with a power input of 24 V and a current consumption of 1000 mA.

IKA KS 130 Control NOL Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm (more) Features - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - All functions can be controlled and documented withlabworldsoft® - Special version with reverse rotating direction on request - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control NOL open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The electronic adjustment of speed and timer ensures precise control, and the digital display provides easy readability of speed, timer function, and operating modes. Additionally, all functions can be controlled and documented with labworldsoft®, enhancing its versatility and convenience in any laboratory setting.

Benchmark Orbi-Blotter Orbital Shaker The Orbi-Blotter features a gentle orbital motion with speed c (more)ontrol down to as little as 3 rpm, making it the ideal orbital choice for low speed applications, such as blotting, washing, staining/destaining, etc. A large 14 x 12 in work surface is included along with a non-slip rubber mat for holding trays, dishes, plates and other flat vessels. An optional stacking platform can be purchased as an accessory, effectively doubling the usable work surface. The maintenance free, brushless motor is capable of loads up to 2 kg and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark Orbi-Blotter Orbital Shaker includes: - 14 x 12 in Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty