Edmund Bühler KS 15 B - Horizontal Hin-Her Shaker Schüttler 15x100ml Halter

G10 Gyrotory / Orbital shaker New Brunswick Scientific Model : G10 Shaker Speed range : 40-400 rpm,  (more) With wooden platform and bottle clamps (presence of rust) With smooth aluminum top 60 x 95cm manufactured specifically for an application. (view the photo) Capacity: 6kg Works correctly. Speed ​​variator: OK Be careful, the RPM sensor does not work (do not take this into account)

Ohaus SHHSMPDG High Speed Microplate Shaker, 120V Speed Range 600 rpm to 2,500 rpm Maximum Capacity  (more)48 Microplates Orbit 3.6 mm Features - Sturdy, adjustable top plate secures up to 48 microplates, 6 deep well plates or small tubes less than 5 in. (12.7 cm) tall up to 7 lb. (3.2 kg). - For difficult to mix samples or to prevent overheating samples while shaking, the Pulse Feature can be adjusted to Pulse ON and Pulse OFF between 1 and 59 second intervals. - Independent LEDs and Touchpad Control for Speed and Time allow you to accurately reproduce the exact settings every time. High Speed Microplate Shaker provides variable high speed shaking from 600 to 2500 rpm formicroplates, deep well plates, and small diameter tubes up to 5 in. (12.7 cm) tall. Programmable pulse feature with adjustments for pulse ON and pulse OFF intervals of between 1 and 59 seconds. Program timer to count down from set time and turn off when timer reaches zero, or to run in continuous mode as timer counts accumulated time until user turns it off. INCLUDED: The Ohaus SHHSMPDG High Speed Microplate Shaker, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus SHHD2325AL Heavy Duty ShakerThe OhausSHHD2325AL Analog 23 kg Capacity Heavy Duty Orbital Shake (more)r is designed forapplications with heavy duty loads. Shaker provides reproducible motion that isevenly distributed throughout the entire surface of the tray.With a loadcapacity up to 50 lbs and over 70 accessory options and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD2325AL.Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD2325AL Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus Endeavor 5000 Series e-E51LD0403 AM Light Duty Orbital Shaker Speed Range 100 to 800 RPM Maxim (more)um Capacity 8.8 lb. (4 kg) Orbit 3 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LD0403 AM Light Duty Orbital Shaker includes: - 11.75 x 8.75 in. Non-Skid Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V Orbit 3mm Speed Range 300 to 3,000 RPM Heating Rate ( (more)/min) 5°C/min (/min) Features - Best in class temperature performance. Enhanced electronics and software allow for fast and accurate temperature control you can trust. - Intuitive touchscreen for simple operation and programming. - Set the functions and the comprehensive help screens in one of six languages to guide the user through the operation of the unit. - Easily create programs for repeat applications. Storage for five separate, 5-step programs. - The USB port allows the transfer of test data to a flash drive for data logging and program storage. OHAUS Thermal Shakers are designed for heating and cooling applications that require consistentand precise high-speed shaking with dependable temperature control from 17°C below ambient to100°C. Temperature can be user-calibrated when precision is required. Customize applications withinterchangeable blocks to accommodate tubes & microplates. Intuitive touchscreen allows the user toview all steps of the program while monitoring the progress. INCLUDED: The Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V includes: - Screwdriver for Block Removal - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dynamic PCR hood ERLAB Biocap RNA DNA Captair ORGANIC For HEPA H14 filter (filter not replaced) Embe (more)dded vertical laminar flow Interior dimensions: 600x601x565 mm UV lamp with timer Power supply: 230 V. 50 Hz. 26 W Transparent acrylic walls, be careful, presence of numerous microcracks (see photos) Acrylic thickness: 10mm Total electrical power: 73W

HEPA filtered horizontal laminar airflow (crossflow) creates an ISO Class 5 (14644-1) / GMP Class A  (more)(Annex 1) work area and prevents ambient air from entering the work area, ensuring product protection. Horizontal velocity: 0.45 m/s Light intensity: > 1000 Lux Pre-filter (ISO 16890 (former G3: EN779)): Coarsefilter Horizontal HEPA filter (EN 1822-1): H14 Dimensions (WxDxH): 1880 x 893 x 1153 mm Interior dimensions (WxDxH): 1859 x 570 x 736 mm Height support frame: 800 mm Weight: 190 kg

4 channel degasser  is used to mechanically remove entrained air and/or gases from pipelines and flu (more)id systems.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW