Boekel Scientific 270200 Orbital Shaker (platform required), 115V/230V

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where i (more)t was surplus to requirements. The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm. It is in reasonable cosmetic condition but has some fairly heavy usage marks. Internal dimensions - L54 W52 H36cmShaker Platform - 45.5 x 45.5cm Tube stand inside holds 20 x 50ml tubes

Ohaus SHRC0719DG Reciprocating ShakerThe OhausSHRC0719DG Digital Reciprocating Shaker is designed fo (more)r a range of applicationsincluding cell cultures and extraction procedures that require accurate,repeatable results. The shaker is microprocessor-controlled to provideconsistent, uniform shaking action. The back-and-forth reciprocating motion hasa 19 mm stroke length. Permanently lubricated ball bearings andmaintenance-free, brushless DC motor provide reliable service and continuousduty operation.Touchpadcontrols with independent LED's for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired set-point to avoid splashing. Theload sensor detects unbalanced conditions & automatically reduces rpm to asafe speed to protect samples.The SHRC0719DG shakeris equipped with an overload protection system. Audible and visual signals willactivate when the system detects an obstruction or overload of the tray to warnthe operator INCLUDED: The Ohaus SHRC0719DG Reciprocating Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISLD04HDG Incubating Shaker The Ohaus ISLD04HDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and ideal for heating and shaking a variety of samples. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLD04HDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLD04HDG Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLD04HDG Incubating Shaker Specifications Temperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range100 to 1200 rpmSpeed Accuracy± 2% of set speedTimer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity8 lbs (3.6 kg)Tray MaterialAluminumTray Dimensions (L x W)11 × 7.75" (27.9 x 19.7 cm)Interior Dimensions (L x W x H)11.3 x 8.3 x 5.7" (28.7 x 21.1 x 14.5 cm)Overall Dimensions (L x W x H)17 x 11 x 10.7" (43.2 x 27.9 x 27 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(3) { background-color: #fffacd; }

IKA Matrix Orbital Delta FP Thermoshaker Speed Range 0 - 1500 rpm Time Setting Max. 6000 min Heat O (more)utput 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ FP is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ FP mixes, heats and has a universal holder for microtiter plates. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result. In addition, IKA Matrix Orbital Δ FP comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta FP Thermoshaker includes: - MATRIX Orbital Delta FP - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta FP Thermoshaker SpecificationsType of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 2000 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control10 RPM StepsTimeryesTimer displayTFTTime setting min. 1 sTime setting max. 6000 minOperating mode timer, continuous and program operationWorking with microtiter platesyesNumber of microtiter plates1Heating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy1.0 (@ 20°C … 45°C); 4.0 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate18 °C/minTemperature displayyesNumber of PCR plates1Number of Deep Well Plates (DWP)1Dimensions (W x H x D)216 x 147 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; }

Benchmark Orbi-Shaker Jr. Mini Orbital Shaker Modeled after the popular Orbi-Shaker, the Orbi-Shaker (more) Jr. is a “mini sized” replica, designed for smaller capacity applications and laboratories where bench space is at a premium. The shaker includes a 9.5" x 8″ platform that mixes at a 19mm orbit, perfect for thorough mixing and aeration in Erlenmeyer flasks. An optional MAGic Clamp platform is available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Orbi-Shaker Jr. Mini Orbital Shaker includes: - 9.5 x 8 in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)has a faulty temp controller. It is sold for spares/repairs. We are unsure of the model as there is no spec plate on the unit.

SYNGENE G:BOX Chemi XRQ Gel Imaging System This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up and is in good working order. It connects to the software and works. SYNGENE G:BOX Chemi XRQModel: Chemi XRQS/N: DR4V2/2858

A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.1 mg (more) Repeatability 0.1 mg Features - OES technology offers high performance and a wider range of models with reliable accuracy & precision - Adjustable environmental (manual or automatic) response characteristics to help cope with the effect of drafts and vibrations - Automatic self calibration to maintain accuracy under temperature changes - Save time with one-touch Full Digital Calibration FDC (Internal or External). Makes calibration simple to perform within seconds - Easy to clean and operate with anti-static glass breeze break and SS steal pan, spill proof ring and base plate - Advance stabilization bandwidth allows for fast response times - Auto power on ensures ready-to-use and optimal performance every time, reducing warm up/wait time - Balance ID and Clock/Calendar function allows for time & date stamps and GLP reports - Data memory plus the ability to export through bidirectional RS-232C or optional USB, Bluetooth & Ethernet - Underhook capability for density measurement and weighing of large or magnetic materials The A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg, brings precision and reliability to the lab with advanced features tailored for demanding applications. Leveraging high-performance OES technology, this model ensures exceptional accuracy across a wide range of tasks, and its adjustable environmental response characteristics help counteract the effects of drafts and vibrations, creating a stable weighing environment. Built for ease of use and durability, the GH-120 features an anti-static glass breeze break, a stainless steel weighing pan, and a spill-proof ring—all of which streamline maintenance and extend the unit's operational life. Engineered to save time and increase productivity, the GH-120 includes automatic self-calibration to uphold measurement accuracy even with temperature shifts. The one-touch Full Digital Calibration (FDC) function allows quick and straightforward calibration within seconds, whether using internal or external calibration. Fast stabilization times ensure that precise readings are available with minimal waiting, supporting smooth workflows in fast-paced lab settings. For comprehensive data management, the Phoenix GH-120 features a balance ID, a clock/calendar function for time-stamped GLP reporting, and extensive data memory capabilities. Connectivity options include standard RS-232C, with additional choices for USB, Bluetooth, and Ethernet to meet diverse data-sharing requirements. Designed with flexibility, this balance also includes underhook weighing for density measurements and supports multiple measurement units, making it an invaluable tool for labs requiring high-precision and adaptable weighing solutions. Supported by a comprehensive 5-year warranty, ensuring long term reliability and peace of mind for all your precision weighing needs. INCLUDED: The A&D Weighing Phoenix GH-120 Analytical Balance, 120 g, 0.1 mg includes: - Anti-Static Glass Breeze Break - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - Floor Plate - Terminal Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.