Watson Marlow Auto Drive 1PH 205U With 205CA8 8 Channel 8 Roller

Varian CC2C Module Model-Sentorr This item was removed from a university lab where it was surplus to (more) requirements. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications:- Model: Sentorr - Serial No.: LID30427

This item has just arrived in our stock. Please enquire for further details.

Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate PlatformThe new  (more)Orbi-Shaker CO2-MP is designed for thorough, mixing of microplates in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 65°C and humidity levels up to 100%.To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller can magnetically mount to the outer walls of the incubator and allows the user to set and adjust the shaker settings without opening the chamber door(s). A 6 position microplate platform is included and secures both standard or deep well plates. Click Here to View Product Video INCLUDED: The Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate Platform includes: - Rubber Mat Microplate Platform 13 x 12 in - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

VC 10 lite Input Pressure 1 to 1,050 mbar Measurement Range 1 to 1,100 mbar Temp. Measuring Max. 200 (more)°C Features - Valve cleaning function for long service life - High energy efficiency thanks to device-to-device communication: control of the circulator by connecting the vacuum controller with PC 1.3 data cable (available as accessory) - Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion - VENT short key button allows pressure equalization during a running process - Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences - USB / RS232 interfaces for connection with the laboratory software labworldsoft® - Electronic control system for improved process efficiency and higher solvent recovery rate - High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller) The IKA VC 10 lite VC 10 Vacuum Controller is a highly efficient and versatile device designed for optimal vacuum control in laboratory settings. It features a valve cleaning function for long service life and high energy efficiency through device-to-device communication. The controller can connect to a circulator via a PC 1.3 data cable (available as an accessory) for enhanced control. It includes an integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion. The VENT short key button allows pressure equalization during a running process. The program function supports up to ten user-defined programs with up to ten pressure/time sequences. Equipped with USB and RS232 interfaces, it easily connects with the lab software labworldsoft®. The electronic control system improves process efficiency and solvent recovery rate. The device supports a wide range of connection diameters and pressure units and features a ceramic Al2O3 vacuum sensor for accurate measurements. With a control range of 1 - 1100 mbar and a resolution of 1 mbar, it ensures precise vacuum control. The vacuum controller also includes a timer, temperature measurement capabilities, and a graph function. Compact and lightweight, with dimensions of 95 x 150 x 110 mm and a weight of 1.284 kg, it is suitable for various laboratory applications, offering robust performance and user-friendly operation.INCLUDED: The IKA VC 10 lite VC 10 Vacuum controller includes: - VC 10 lite - USB Cable - USB A to Micro-B, 2 m - Two Year Manufacturer's Warranty

VACUUBRAND VACUU-Select Complete Benchtop Controller Upper Measuring Limit 810 torr Lower Measuri (more)ng Limit 0.1 torr Accuracy Less than +/- 1 mbar/hPa/torr Features - Supplied complete and ready for use, including integrated valve and common hose connections - Predefined vacuum applications and automatic boiling point detection saves time - Simple setup - connect VACUU·SELECT in-line between pump and vacuum application - Integrated vent valve allows inert gas connection - Integrated check valve minimizes interaction with other applications on the same vacuum supply The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Benchtop Controller includes: - VACUU·SELECT complete controller bench-top device - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM Speed Range 10 to 100 RPM Number of Rollers 6 Roll (more)ers Roller Length 11.02 in. Features - Features a speed range of 10 to 100 RPM for precise mixing control - Accommodates up to 5 sample tubes simultaneously, increasing lab efficiency - Each roller measures 11.02 inches, suitable for a variety of sample sizes - Provides accurate and consistent speed adjustments - Ideal for mixing blood samples, viscous substances, and preventing coagulation - Designed to withstand the rigors of continuous laboratory use The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM is a versatile and efficient mixing solution designed for laboratories that require gentle yet thorough mixing of samples. Featuring dual rocking and rolling modes, this tube roller is ideal for a variety of applications, including mixing blood samples, handling viscous substances, and preventing blood coagulation and immune precipitation. With an adjustable speed range of 10 to 100 RPM, the MS-RE100A ensures precise control over mixing processes, accommodating a wide range of sample viscosities and mixing needs. The six-roller design, each with a length of 11.02 inches, allows for the simultaneous mixing of multiple tubes, enhancing productivity in busy lab environments. Equipped with a brushless DC motor, the MS-RE100A provides reliable, maintenance-free operation and supports a maximum loading weight of 8.8 lbs. The tube roller's compact dimensions (18.4 x 9.8 x 4.0 inches) and lightweight design (12.1 lbs) make it easy to integrate into any laboratory setup. Its simple speed display and electronic speed control ensure accurate and consistent performance. With electrical requirements of 110-220V and 25W power consumption, the MS-RE100A is an energy-efficient choice for labs seeking to optimize their mixing capabilities without sacrificing space or power. This tube roller is an indispensable tool for labs focused on achieving consistent and precise mixing results across a variety of sample types. INCLUDED: The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

Manufacturer: Molecular Devices Model: SpectraMax M2e Description: The SpectraMax® M2 and M2e system (more)s from Molecular Devices are multidetection microplate readers with dual monochromators, dual-mode cuvette ports and top and bottom reading capability (top reading only on the M2). Detection modalities include absorbance (UV-Vis Abs) and fluorescence intensity (FI). Endpoint, kinetic, spectrum and area-well scanning reading modes and the PathCheck® sensor enable homogeneous and heterogeneous microplate assays to be performed in a flexible system. SpectraMax M2 readers enable easy conversion and optimisation from very low throughput assays to medium to high throughput assays, faster, more accurate results and reagent savings. In addition, combined absorbance and fluorescence intensity assays can be performed with a single read command. Core features: - Multi-detection capability - Top and bottom read (M2e only) - Dual-mode cuvette connection - Two monochromators - PathCheck and well volume sensor - Validation of device and software - Robot compatible Technical data: Absorbance photometric performance   Wavelength selection: Monochromator tunable in 1 nm steps Wavelength range: 200-1000 nm Wavelength bandwidth: ≤ 4.0 nm Wavelength accuracy: ±2.0 nm Repeatability of the wavelength: ±0.2 nm Photometric range: 0-4.0 OD Photometric resolution: 0.001 OD Photometric accuracy (microplate): < ±0.006 OD ±1.0%, 0-2 OD Photometric accuracy (cuvette): < ±0.005 OR ±1.0%, 0-2 OD Photometric accuracy: < ±0.003 OD ±1.0%, 0-2 OD Flatness of the baseline: < 0.001 OD Stray light: < 0.05% at 230 nm Fluorescence photometric performance   Dual monochromators: step size of 1 nm EX wavelength range: 250-850 nm EM wavelength range: 360-850 nm Wavelength bandwidth (EX, EM): 9 nm Optimised top-read sensitivity: 5 pM (fluorescein) in 96 wells Top-read guaranteed* sensitivity: 15 pM (fluorescein) in 96 wells Time-resolved fluorescence (secondary mode)   EX wavelength range: 250-850 nm EM wavelength range: 360-850 nm Data acquisition: 50-1450 µsec. in 200 µsec. steps Guaranteed sensitivity: 7 pM Eu chelate Luminescence (secondary mode)  Wavelength range (M2): 360-850 nm Guaranteed sensitivity: 50 fM alkaline phosphatase General photometric performance  Plate formats: 6, 12, 24, 48, 96, 384 wells Light source: Xenon flash lamp (1 joule/flash) Detector: Photomultiplier tube (PMT) Reading time** 96 wells: 384 wells: Abs 18 sec, FI 15 sec Abs 49 sec, FI 45 sec Shaking time: 0 to 999 seconds Temperature control: Ambient temperature +4°C to 45°C Temperature uniformity: < 1°C at 37°C setpoint Temperature accuracy: ±1°C at 37°C setpoint General specifications   Power consumption: < 125 watts Power: 100-240 Vac, 3 A, 50/60 Hz Dimensions: 23x16x9 cm Weight: 35lbs Scope of delivery: - SpectraMax M2e - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website &ndash; SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.