MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x600 mm.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 410x410 mm.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300×300 mm (A x B).

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. Control is t (more)hrough a simple on/off switch and the unit will run continuously at the fixed speed of 33 rpm. Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to 100mm diameter. Number of rollers: 10 Speed: 33 rpm Amplitude: 16 mm Maximum load: 3.0 kg Controls: Analogue Timer: No Roller size (l x diameter): 300 x 30 mm Attention 120V!

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

The FP403 + FP404 model is an analyzer specially designed for in-line oxygen and CO2 measurements on (more) both horizontal and vertical flow packaging machines. Very easy to use and adapt to any mounting configuration.

Turbidy meter LTP4

The iBlot 2 Dry Blotting System was designed to deliver a high degree of convenience. The iBlot 2 Dr (more)y Blotting System is a true self-contained, plug-and-play system, with an integrated power supply, pre-packaged ready-to-use transfer stacks. Setup, teardown, and cleanup only takes minutes compared to the much more cumbersome and hands-on steps required for wet-tank transfer. The iBlot 2 Dry Blotting System has a simple touchscreen interface and pre-programmed optimized transfer programs, with the option to customize programs to suit your needs. In addition to ease of use and convenience, the iBlot 2 Dry Blotting System offers high-efficiency protein transfers for high downstream detection sensitivity—in many cases, higher than wet and semi-dry transfer methods. In the end, it helps you achieve more accurate detection using less sample. Transfer proteins in 7 minutes and move on quickly to the rest of your western blot processing. The iBlot 2 Dry Blotting System is designed to work with multiple polyacrylamide gel sizes, including the midi size (8 x 13 cm), E-PAGE 48 and 96 gels (13.5 x 10.8 cm), and mini gels (8 x 8 cm). The system is also compatible with all protein gel chemistries (tris-gylcine, bis-tris, tris-acetate, and tricine). Capacity: 1 – 2 mini, or 1 midi, or 1 E-PAGE gel Compatibility: 1.0 – 1.5 mm thick gels Transfer time: 6 – 10 min Transfer buffer: No buffer required Programs: Pre-programmed with six methods for transfer of proteins from various gel types or create custom programs Power supply: Internal (no additional power supply needed) Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg

emergency shower