Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

This Zeiss Stemi SR Stereo Microscope was removed from a university lab where it was surplus to requ (more)irements. The unit is in working order and focuses well. It is in reasonably good cosmetic condition but has some marks from use. 3 x Eye Pieces:-W 10 x/25 (46 40 02)W 10 x/25 (46 40 03)W - PI 10 x /23 (45 50 44)Part - 45 60 29 0.25 x Stage Part - 47 52 65Condenser Part - 47 50 61Magnifier Part - 47 52 53

Motic PA43 BIO PH Trinocular Upright Biomedical Microscope Objectives 4X, PH 10X, PH 40X, PH 100XPla (more)n UC Phase & Darkfield Accessory Phase Centering Telescope Illumination Kohler Illumination 6V/30WLED 3W Features - Transmitted Kohler illumination System ensures for the best optical quality, with additional flexibility between traditional 30W Halogen or LED illumination - Automatic power saving mode for whenever the microscope is left temporarily. Timeframe to activation is selectable by the user and allows protection of your samples from the heat of the illuminator. - ECO mode also results in energy savings which will extend the lifetime of the lamp, and also reduces overall operational costs. - The IL Function provides an optimized, consistent, and even brightness in illumination to allow maintained brightness level even if the observation magnification is changed during observation. - Equipped with a specially designed rackless stage, the ceramic coated surface provides durability and reliability, and offers an easy-to-use ergonomic stage with zero backlash. - The PA43 offer a good variety of contrast accessories that are available and easily upgradable to meet different requirements. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications, from cost-effective solutions to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design and can be upgraded at any time.INCLUDED: The Motic PA43 BIO PH Trinocular Upright Biomedical Microscope includes: - Plan UC Objectives: 4X/0.1, W.D=30.5mm & 100X/1.25 Oil, W.D=0.16mm - Phase Contrast Objectives: 10X/0.25, W.D=17.4mm & 40X/0.65, W.D=0.6mm - Phase Centering Telescope - Blue Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PX43MET Trinocular Inverted Industrial Microscope Objectives S-APO BD 5X, 10X, 20X, 50X Objec (more)tives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - DIC for better depth imaging. - Brightfield and Darkfield contrast methods to ensure compatibility with a variety of applications. - 360° Swivel Range guarantees effective use of laboratory space. - Can be used with SLR and DSLR Camera via 2.5x and 4x Camera Eyepieces. - Motic ECO Smart Sense is an infrared sensor built into the stand which detects whether or not there is a user working in front of the microscope. Motic’s PX43MET is a professional Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulkier materials samples. The microscope is a best fit for automotive, machinery, and metal fabrication industries and similar fields. INCLUDED: The Motic PX43MET Trinocular Inverted Industrial Microscope includes: - Plan S-APO BD 5X, 10X, 20X, 50X Objectives - 12.5x7.5inch stage with metal plate - Quintuple Revolving Nosepiece - Fine Focus Knob - UC-WF 10X/FN22 Eyepieces - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

*No pat record* Biochrom Libra S6 Spectrophotometer Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The item passed all self-diagnostics tests. Includes 9V DVC Power Cable.

TripleRed Alto-UF-R Water Purification System Lab This system was removed from a university lab, whe (more)re it was surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 250 mm Material: stainless steel with a silicone tip for standards up to 500 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW