Cell MicroControls Digital mTCII 2Ch micro-Temp controller + Connection Cable

VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting The VACUU·SELECT complete cont (more)roller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting includes: - VACUU·SELECT complete controller for lab scaffold mounting - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Wheaton 6-Tier Roller Apparatus Cat No 348970CE This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver. It is in good cosmetic condition with minor marks

Beckman Coulter Z1 Particle Counter with Controller This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. it is in good cosmetic condition with minor marks.

Roller mixer with 5 rollers. The synchronized rotating PVC rollers provide a uniform swaying surface (more), perfectly suited for simultaneous gentle and homogeneous mixing of cylindrical vessels with e.g. blood or other cell suspension. Speed: 38 rpm Length of rolls: 330 mm Number of rolls: 5 Tilt angle: 3° Max load: 5 kg Dimensions (WxHxD): 180 x 110 x 480 mm Weight: 3.7 kg

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300x250 mm (A x B).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Edwards T-Station 85H Dry Turbo Station CF63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Con (more)nection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station CF63, 100-120V includes: - T-Station Pumping Station Base - XDD1 Diaphragm Pump - nEXT85H Turbomolecular Pump with CF63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000GThe PIPETMAN G 4-Pipette Kit p (more)rovides four pipettes covering volume transfers from 0.2 ul to 1000 ul, which will tackle most laboratory needs. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury, all while maintaining the durability, accuracy, and reliability of the original PIPETMAN series. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of the PIPETMAN G pipettes significantly reduces the force needed to aspirate and dispense liquids. This benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions.FlexiblePIPETMAN G pipettes come with a durable stainless steel tip ejector, which is ideal for most situations. Plastic tip ejectors are available separately and are recommended for working with corrosive substances. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000G includes: - Four PIPETMAN G Pipettes: P2G, P20G, P200G, and P1000G - Three Racks of PIPETMAN DIAMOND Tips (Models: D10L, D200 and D1000) - Four SINGLE Pipette Holders - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g Re (more)adability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-alert visually and audibly indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Internal Auto calibration or with easy one-touch button - performs and documents internal calibration - Password-Protect – offers password-protection up to 11 users and 1 administrator - GLP/GMP/GCP Compliance with full calibration reports - Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF | REZERO, CAL, MODE, SAMPLE, PRINT, TARE - Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility - Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional) - Stainless steel pan and dust-plate can be easily removed for cleaning - Die-cast aluminum housing provides extra stability and durability - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), delivers precision in regulated environments with its 220 g capacity and 0.0001 g readability. This balance is NTEP certified, ensuring compliance and accuracy for legal-for-trade applications. It enhances productivity with a fast stabilization time of approximately 2.0 seconds and supports stringent compliance needs, including USP41, with features that alert users when sample sizes fall below minimum requirements, effectively reducing waste and increasing efficiency. Designed to simplify routine checks and increase operational efficiency, the GX-224AN includes an Electronically Controlled Load (ECL) management system. This system performs repeatability testing and automatic precision checks internally without the need for external weights, thereby enhancing the reliability of measurements. The balance is equipped with six straightforward keys and offers a quick toggle switch between USB and RS-232C communication options, facilitating seamless integration into existing data management systems. For ease of use, the GX-224AN features an illuminated, front-mounted level that ensures quick and accurate leveling, even when operators are wearing gloves. It incorporates automatic self-calibration and one-touch internal/external calibration, guaranteeing valid results every time. The balance's robust construction and comprehensive measurement capabilities—including percent calculation and piece counting—make it ideal for a wide range of scientific applications. This analytical balance, with its precise measurement technology and legal-for-trade certification, stands as an excellent choice for professionals requiring dependable, high-performance tools in regulated settings. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Boxer Front Loading Autoclave This was removed from a university lab where it was surplus to require (more)ments. The unit has been professionally serviced and is in good working order. It is in reasonable cosmetic condition but has marks from use.

Static headspace autosampler suitable for Thermo Trace GS systems

Optical Design: Dual-Beam – Internal Reference Detector Spectral Bandwidth: 1.8 nm Light Source: Xen (more)on Flash Lamp Detectors: Dual Silicon Photodiodes Wavelength Range: 190 – 1100 nm Wavelength Accuracy: ±1.0 nm Wavelength Repeatability: ±0.5 nm Wavelength Slew Speed: 11000 nm/min Wavelength Scan Speed: Up to 3600 nm/min Wavelength Data Interval for Scanning: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm Photometric Linear Range: Up to 3.5 A at 260 nm Photometric Display: -0.1 A; -1.5–125%T; ±9999 C Photometric Accuracy: ±0.005 A at 1.0 A, 0.010 A K2Cr2O7 Photometric Noise: <0.00025 at 0.0 A; <0.00050 at 1.0 A; <0.00080 at 2.0 A; RMS at 260 nm Photometric Drift: <0.0005 A/hr Stray Light: <0.08%T at 220, 340 nm (NaI, NaNO2); <1.0%T 198–200 nm (KCl) Connectivity: USB Type A port for USB memory device (front panel), USB Type B port for optional computer connectivity (rear panel), USB Type A port for external printer (rear panel) Dimensions (WxDxH): 300 x 400 x 250 mm Weight: 8.6 kg