Benchmark BT4001 Orbi-Shaker CO2 w/ Remote Controller

This Leica Reichert Ultracut S Microtome & Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound. Leica Reichert Ultracut SType - 702501SN - 420699 StereoZoom 6Zoom Range 0.67X - 4.0X 2 x Eye Pieces 15X W.F. Stereo (31-05-62) ControllerType - 654901SN - 89465

Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller This was removed from a university lab (more) where it was surplus to requirements. Both units power on with the laser beam working. It was tested with a spare cable from another laser which is not included. It is in good cosmetic condition with some minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1100969 Rev. AE Laser head:-Model - Sapphire 488-200 CDRH

VACUUBRAND VACUU-Select Complete Benchtop Controller Upper Measuring Limit 810 torr Lower Measuri (more)ng Limit 0.1 torr Accuracy Less than +/- 1 mbar/hPa/torr Features - Supplied complete and ready for use, including integrated valve and common hose connections - Predefined vacuum applications and automatic boiling point detection saves time - Simple setup - connect VACUU·SELECT in-line between pump and vacuum application - Integrated vent valve allows inert gas connection - Integrated check valve minimizes interaction with other applications on the same vacuum supply The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Benchtop Controller includes: - VACUU·SELECT complete controller bench-top device - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 410x410 mm.

Black Stone BL7916 pH Controller and Pump Modèle : BL7916D pH Controller and Pump pH Range : 0.00 to (more) 14.00 PH Power supply : 230 VAC 15% 50/60 HZ (40 W)

This was removed form a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in reasonable cosmetic condition but has rust and marks from use.

Starlab Dry Bath Mono N2400-4001 Block Heater This item was removed from a university lab where it w (more)as surplus to requirement. It is brand new and in its original packaging. The PSU is included. Specifications: - Model: N2400-4001 - Serial No. 201130148 - Max temperature 150˚C - Timer 0 - 999 minutes - RS 232 data logger

Eppendorf FA-30x2 Fixed Angle Rotor The Eppendorf FA-30x2 Fixed Angle Rotor, is a centrifuge rotor d (more)esigned for use with the Eppendorf 5910R/Ri centrifuges. This rotor has a maximum speed of 13,700 RPM and a maximum relative centrifugal force (RCF) of 20,984 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2 mL tubes, making it ideal for high throughput applications. INCLUDED: The Eppendorf FA-30x2 Fixed Angle Rotor includes: - Eppendorf FA-30x2 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-30x2 Fixed Angle Rotor SpecificationsMaximum Speed13,700 RPMMaximum RCF20,984 x gMaximum Capacity30 × 1.5/2 mL tubesCentrifuge CompatibilityEppendorf 5910R/RiDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump The nEXT 85D pumps consist of the turbomole (more)cular pump with a permanently attached controller containing drive electronics.The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 D pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.nEXT 85D pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 D pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Features - Class leading performance in a reduced footprint - Enhanced customer choice with standard and compression focused variants - Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology - Additional flexibility from customised interstage and backing port position selection - 4 year service with full end-user field serviceability - CMSD enabled low vibration levels - Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration - Full suite of tailored accessories Click Here to View Product Video INCLUDED: The Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW