Benchmark BT300-RB Roller Platform, adjustable for uncommon vessels

Midi Plus Pipette Controller SARTORIUS BIOHIT FAMILY 710931 Volume: Pipettes 1 - 100 ml and Proline  (more)tips 5 and 10 ml Power supply: Battery Model: Midi Plus 710931 Gross weight: 0.658 kg Gross dimensions: 29 x 20.5 x 7 cm Rechargeable, cordless, lightweight Can be used with all plastic and glass pipettes from 1 to 100 ml thanks to interchangeable connectors Can be used with Sartorius BiohitfamilyProline tips 5 and 10 ml Linear speed adjustment Speed ​​adjustment by variable pressure on the control buttons Integrated folding stand

FURTHER DETAILS TO FOLLOW

Temperature range: +7°C to 85°C Speed: 3 – 4 rpm (± 1) Max No. of Tubes: 3 large 80 mm tubes (2 incl (more)uded) Dimensions (DxWxH): 555 x 325 x 375 mm Internal Dimensions (DxWxH): 320 x 270 x 250 mm

This Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41 was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in reasonably good cosmetic condition but has some marks from use.

Leica Reichert Ultracut S Ultramicrotome and Controller This was removed from a university lab where (more) it was surplus to requirements. The units all power up and the microtome is mechanically sounds, but only the top light is working. It is in good cosmetic condition with minor marks. Leica Reichert Ultracut S UltramicrotomeModel: Ultracut S Ultramicrotome 702501Serial#: 420626 2x Eyepieces:Cambridge instrumentsPart#: 31-05-62 Leica Reichert AG Control PanelModel: 654901Serial#: 89378

VACUUBRAND VACUU-Select Complete Benchtop Controller Upper Measuring Limit 810 torr Lower Measuri (more)ng Limit 0.1 torr Accuracy Less than +/- 1 mbar/hPa/torr Features - Supplied complete and ready for use, including integrated valve and common hose connections - Predefined vacuum applications and automatic boiling point detection saves time - Simple setup - connect VACUU·SELECT in-line between pump and vacuum application - Integrated vent valve allows inert gas connection - Integrated check valve minimizes interaction with other applications on the same vacuum supply The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Benchtop Controller includes: - VACUU·SELECT complete controller bench-top device - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37 ° C and -2 ° C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sanyo Ultra Low Temperature Freezer MDF-U3086SBT ULT This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). The door seals were examined and found to be in poor condition, torn in places and need replaced. For this reason it is sold for spares/repairs. It is in good cosmetic condition both internally and externally. Equipped with a liquid CO2 backup system, this was not testedInner dimensions 51 x 50 x 112cm (w x d x h)

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 161L (5.68 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 161L (5.68 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 8 shelves with a maximum chamber load of 462 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V offers advanced precision and reliability with a working temperature range from at least 10°C above ambient to +250°C. Designed with a spacious 161L (5.68 cu.ft.) interior, this oven features a stainless steel chamber reinforced with deep-drawn ribbing, providing both durability and ease of cleaning. The TwinDISPLAY control system, equipped with two high-definition TFT-color displays, allows for adaptive multifunctional temperature management, ensuring accurate control via two Pt100 sensors in a 4-wire circuit for mutual monitoring. Additional features include forced air circulation, adjustable fan speed in 10% increments, and pre-heated fresh air admixture for optimal thermal distribution. For enhanced safety, the Memmert UF160TS includes the AutoSAFETY system, which provides integrated over- and undertemperature protection, as well as a mechanical temperature limiter (TB) that switches off heating at 20°C above the nominal temperature. The Function SetpointWAIT ensures the process begins only once the set temperature is reached, while the Function HeatBALANCE allows precise adjustment of heating performance. With a maximum loading capacity of 462 lbs, spread across up to 8 shelves, this oven is ideal for demanding laboratory applications requiring consistent, reliable performance. INCLUDED: The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300360 Overhead Stirrer Impeller, BR 13 Square-Blade Due to its blade dimensions, the sq (more)uare-blade impeller BR 13 is ideal for loosening and homogenizing in vessels with the following characteristics: ideal vessel diameter: 140 mm, ideal ground clearance: 7 mm, ideal filling level: 140 mm, and ideal volume: 2,200 ml. The square-blade impeller BR 13 has a total length of 450 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300360 Overhead Stirrer Impeller, BR 13 Square-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty