Scilogex SK-D3309-Pro LCD Digital 3D Rocker

Benchmark Everlast 247 Rocker Tilt Angle Variable; 0° to +/-20° Speed Variable, 3 to 80 RPM Load Ca (more)pacity 12 lbs Features - Everlast™ 5 year warranty - Extra-large 16 x 12 in. work surface - Stainless-steel platform - Dual platform accessory doubles work surface - Cold room and incubator safe Benchmark’s Everlast 247 Rocker is built to last. Twenty four hours a day, seven days a week . . . No problem! The powerful motor and heavy-duty drive system remain reliable and consistent, even under constant usage in a cold room (min. 0C) or incubator (max. 65C). The rocking speed and tilt angle can easily be adjusted to vary between gentle and aggressive agitation. Both the standard platform and the (optional) stacking platform are constructed of stainless steel, preventing against any rusting or corrosion. The Everlast 247 is designed to provide years of uninterrupted service.INCLUDED: The Benchmark Everlast 247 Rocker includes: - 16 x 12 inch Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Boekel Scientific 280150 Variable Speed Mini Tube RockerThe Boekel Scientific Mini Variable Speed Tu (more)be Rocker provides gentle mixing and additional control for collection tubes and other small samples. Ideal for small laboratories or benchtops with limited space. The speed can be varied from 5 - 25 rotations per minute and the unit is supplied with a non-slip mat. Features:• Provides gentle rocking action •Small footprint with 9 positions •Variable speed 5 - 25 RPM •Fixed tilt - 35° angle •Supplied with non-slip pad •2 Year warranty •Power pack is UL, CSA and CE approved INCLUDED: The Boekel Scientific 280150 Variable Speed Mini Tube Rocker includes: - Non-slip Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Rocker 3D Digital Shaker Shaking Movement Tumbling Tumbling Angle Range 0 - 15 ° Speed Range  (more)0-80 rpm Features - Adjustable countdown timer: 1 s to 99h 59min - Display of shaking time and error codes - Various attachments for different applications - Usable in incubators (4 to 50 °C) - Easy operation with touch keypad and anti-slip rubber mat - Suitable for continuous operation; shaking diameter: 0 - 15°; speed range: 5 - 80 rpm Digital shaker with three-dimensional tumbling motion and adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes and tubes. Ideal for e.g. the cultivation of cell cultures, DANN extractions, distributing of cells and staining and destaining of cells. Even with load and voltage fluctuations, shaking speed remains constant. An adjustable angle ensures optimum adaption to the particular experimental conditions. INCLUDED: The IKA Rocker 3D Digital Shaker includes: - ROCKER 3D Digital - RD 1 universal mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Rocker 3D Digital Shaker Specifications Type of movementtumblingPermissible shaking weight (incl. attachment)2 kgPermissible ON time100 %Speed min (adjustable)5 rpmSpeed range0 - 80 rpmSpeed display 7 segment LEDSpeed control 1 RPM stepsTimeryesTimer display7 segment LEDTime setting min.1 sTime setting max.5999 minOperating modetimer and continuous operationTumbling angle adjustable0 - 15 °Shaking platform stackableyesAltitude (when shaking platform stacked)30 mmDimensions (W x H x D)280 x 185 x 330 mmWeight2.3 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationRocker 2D BasicRocker 2D DigitalRocker 3D BasicRocker 3D DigitalType of movementrockingrockingtumblingtumblingPermissible shaking weight (incl. attachment)2 kg2 kg2 kg2 kgSpeed range5 - 80 rpm5 - 80 rpmfixed 30 rpm5 - 80 rpmSpeed control1 RPM steps1 RPM stepsN/A1 RPM stepsTimernoyesnoyesTime setting min.N/A1 sN/A1 sTime setting max.N/A5999 minN/A5999 minRocking/Tumbling anglefixed 8°adjustable 2.5 - 15°fixed 8°adjustable 0 - 15°Shaking platform stackableyesyesyesyesDimensions (W x H x D)280 x 150 x 330 mm280 x 150 x 330 mm280 x 165 x 330 mm280 x 185 x 330 mmWeight2.2 kg2.2 kg2.2 kg2.3 kgVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The VELP Stirring Rod with Folding Blade is ideal for very low/low viscosity range at medium/high sp (more)eed range. Ideal for ES, LS, DLS, LH, DLH, PW, OHS series stirrers. The self-aligning blade during rotation generates an axial flow from top to bottom. All VELP stirring rods are made of stainless steel. When choosing the correct stirring rod, it is important to consider the power of the stirrer, the viscosity of the substance and its volume.

BlotBoy 3D rocker mixer B3D 1308, fixed speed, with flat mat BENCHMARK New equipment in its original (more) packaging Speed : Fixed, 12 RPM Tilt angle : environ 8° Platform size : 30 x 30 cm Load capacity : 2Kg Operating temp range : +4°C to 45°C Overall dimensions : 30 x 30 x 20 cm Electrical requirements : 230V, 50/60Hz, 50W

benchblotter platform rocker BENCHMARK BR1000, fixed speed, with flat mat New equipment in its origi (more)nal packaging Speed : Fixed, 12 RPM Tilt angle : environ 8° Platform size : 30 x 30 cm Load capacity : 2.3Kg Operating temp range : +4°C to 45°C Overall dimensions : 34 x 30 x 12 cm Electrical requirements : 230V, 50/60Hz, 50W

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This listing is for a Eppendorf 5702 Centrifuge. The unit is in full working condition and is ready (more) for immediate release. The Eppendorf Centrifuge 5702 is a versatile and user-friendly low-speed centrifuge, perfect for cell culture and clinical research labs that require efficient processing of samples. Its thoughtful design and functionality cater to various applications while ensuring safety and reliability. Key Features: Speed and RCF: With a maximum speed of 4,400 rpm and a maximum RCF of 3,000 x g, the Centrifuge 5702 is well-suited for separating components in liquid mixtures, such as serum and plasma from blood samples. Rotor Options: It offers six different rotor options, allowing users to accommodate various tube sizes and types, making it adaptable to multiple workflows. For example, labs can use rotors designed for standard 15 mL and 50 mL tubes as well as more specialized options. Temperature Control: Available in refrigerated (5702 R) and heated and refrigerated (5702 RH) models, it allows precise temperature management during centrifugation, which is critical for sensitive biological samples, such as cell cultures that require specific temperature settings to maintain viability. Safety Features: An imbalance detection system ensures maximum safety by stopping operation if the load is not properly balanced, while a key lock feature prevents accidental changes to operational parameters, enhancing overall user safety. Quiet Operation: Operating at less than 52 dB, it functions quietly, making it suitable for labs where noise reduction is essential for a productive work environment. Compact Design: With a footprint of 38 cm x 58 cm and a weight of 36 kg, the centrifuge is space-efficient and can fit comfortably in a variety of laboratory settings, optimizing workspace usage. Applications: Cell Culture: Ideal for processing cell cultures, allowing researchers to prepare samples efficiently while maintaining sample integrity. Clinical Research: Designed for low to mid-throughput applications, making it suitable for routine testing and research in clinical settings. In Vitro Diagnostics: Specifically intended to work as an accessory for in vitro diagnostic devices, it supports various diagnostic applications by ensuring the precise separation of sample components.

Branson Catenoidal Horn 1/2 in Diameter Solid Catenoidal horn disruptor horn, 1/2″ diameter, solid  (more)for processing sample volumes of 10 – 250 ml, not usable with accessory chambers, used with Branson SFX250, SFX550, S250A, and S450AINCLUDED: The Branson Catenoidal Horn 1/2 in Diameter Solid includes: - Manufacturer's Documentation Request a Formal Quote

Gilson PIPETMAN Classic P2 PipetteThe PIPETMAN® Classic line is one of the world standards in pipett (more)ing and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic line is available in eight single channel models covering a range of volumes from 0.2µL to 10 mL. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting. Routine cleaning and maintenance are all that is required to keep PIPETMAN Classic in top condition for years. The PIPETMAN Classic design allows for easy access to user-serviceable parts, along with a fully autoclavable tip holder and ejector. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN Classic P2 Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson PIPETMAN Classic P2 Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range0.2 - 2 µLPipette ModelP2Pipette RangePIPETMAN ClassicNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachWarranty3 YearsRequest a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

3 Vacuum Blotting unit XL for Pharmacia LKB VacuGene Vacuum Blotting Pump To transfer nucleic acids  (more)from a gel to a transfer membrane. DNA and RNA fragments separated by agarose gel electrophoresis can be transferred, ensuring that optimal results are obtained even from genomic DNA digests.