IKA Rocker 3D Basic Shaker

BlotBoy 3D rocker mixer B3D 1308, fixed speed, with flat mat BENCHMARK New equipment in its original (more) packaging Speed : Fixed, 12 RPM Tilt angle : environ 8° Platform size : 30 x 30 cm Load capacity : 2Kg Operating temp range : +4°C to 45°C Overall dimensions : 30 x 30 x 20 cm Electrical requirements : 230V, 50/60Hz, 50W

Boekel Scientific 282000 Variable Speed Tube Rocker XL The Boekel Scientific high capacity variable  (more)speed laboratory tube rocker provides gentle controllable mixing. Ideal for test tubes and blood draw tubes that require agitation. The speed can be varied from 5 - 25 rotations per minute. The unit is supplied with a non-slip pad and a 2 year warranty. Features:•Provides gentle rocking action •Low profile design with 18 positions •Variable speed 5 - 25 RPM •Fixed tilt - 35° angle •Supplied with non-slip pad •2 Year warranty •Power pack is UL, CSA and CE approved INCLUDED: The Boekel Scientific 282000 Variable Speed Tube Rocker XL includes: - Non- slip Pad - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Everlast 247 Rocker Tilt Angle Variable; 0° to +/-20° Speed Variable, 3 to 80 RPM Load Ca (more)pacity 12 lbs Features - Everlast™ 5 year warranty - Extra-large 16 x 12 in. work surface - Stainless-steel platform - Dual platform accessory doubles work surface - Cold room and incubator safe Benchmark’s Everlast 247 Rocker is built to last. Twenty four hours a day, seven days a week . . . No problem! The powerful motor and heavy-duty drive system remain reliable and consistent, even under constant usage in a cold room (min. 0C) or incubator (max. 65C). The rocking speed and tilt angle can easily be adjusted to vary between gentle and aggressive agitation. Both the standard platform and the (optional) stacking platform are constructed of stainless steel, preventing against any rusting or corrosion. The Everlast 247 is designed to provide years of uninterrupted service.INCLUDED: The Benchmark Everlast 247 Rocker includes: - 16 x 12 inch Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark BenchRocker 2D Rocker Speed Variable, 2 to 30 RPM Tilt Angle Variable, 0° to 30° Platfor (more)m 14 x 12 in Features - 2-30 RPM speed for precise mixing - Adjustable tilt 0°-30° for efficiency - 14x12 in platform for various vessels - 8 lbs capacity for diverse applications - Compact design: 14x12x6.5 in, 50W - Included: Flat mat, power cord, guide - 2-year manufacturer's warranty Your browser does not support the video tag. The BenchRocker 2D is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results. INCLUDED: The Benchmark BenchRocker 2D Rocker includes: - 14 x 12 inch Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BenchWaver 3D Rocker Speed Variable, 2 to 30 RPM Tilt Angle Variable, 0° to 30° Platform (more) 12 x 12 in Features - 3D "undulating" motion for molecular biology. - Adjustable tilt angle from 0 to 10°. - Speed control from 5 to 105 rpm on LCD. - Variable tilt and speed for versatile use. - Timed operation from 1 min to 99 hours. - Large 13.5 x 13 inch non-slip platform. - Optional stack platform for more capacity. Your browser does not support the video tag. The BenchWaver combines the basic rocking motion of traditional platform rockers with the circular motion of an orbital shaker. This combination is ideal for generating the optimum 3-dimensional “undulating” motion commonly preferred for molecular biology applications. The tilt angle is instantly adjustable (no tools or disassembly required) from 0 to 10° and the mixing speed can be adjusted from 5 to 105 rpm, using the large, user-friendly LCD control panel. Combined control of both parameters (tilt and speed) makes the BenchWaver a versatile workhorse that can provide anything from gentle, slow moving waves to a rapid, more vigorous motion. Additionally, time of operation can be selected from1 minute up to 99 hours or for continuous operation. The large 13.5 x 13 inch platform is supplied complete with a non-slip, rubber mat. An optional stacking platform is available for users requiring additional mixing capacity. BenchWaver is a reliable and versatile instrument and can be used in refrigerated or incubated. Click Here to View Product Video INCLUDED: The Benchmark BenchWaver 3D Rocker includes: - 13.5 x 13 inch Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Max. vacuum: 99 mbar abs. Max. flow rate: 34 L/min Noise level: 52 dB Hose barb: ID8 Vacuum regulato (more)r: Yes Filter cartridge: Yes Overflow protection: Yes Thermal protection: Yes Dimension (LxWxH): 310 x 140 x 200 mm Weight: 5.2 kg

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable. It was tested with a temperature and CO2 sensor (not included). Internal dimensions are: L44cm x W49cm x H60cm.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Varied Standards: The set consists of 12 wire standards and 9 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are wires. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The Waters Acquity UPLC Binary Solvent Manager delivers solvent compositions for isocratic and binar (more)y gradient methods at flow rates of 0.01 to 2.0 mL per minute.  The binary solvent manager’s two pump channels permit quick solvent changeovers at a flow rate of 4.0 mL per minute. Low-volume degasser channels (480 µL internal volume), automated solvent-selection valves, and an automated vent valve make the quick changeovers possible.  The pump accommodates up to four chromatographic solvents and one Binary Solvent Manager Seal wash solvent.