Boekel Scientific 260350 Rocker II, 115V

Boekel Scientific 280150 Variable Speed Mini Tube RockerThe Boekel Scientific Mini Variable Speed Tu (more)be Rocker provides gentle mixing and additional control for collection tubes and other small samples. Ideal for small laboratories or benchtops with limited space. The speed can be varied from 5 - 25 rotations per minute and the unit is supplied with a non-slip mat. Features:• Provides gentle rocking action •Small footprint with 9 positions •Variable speed 5 - 25 RPM •Fixed tilt - 35° angle •Supplied with non-slip pad •2 Year warranty •Power pack is UL, CSA and CE approved INCLUDED: The Boekel Scientific 280150 Variable Speed Mini Tube Rocker includes: - Non-slip Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Rocker 2D Basic Shaker Speed Range 5 to 80 RPM Type of Movement Rocking Rocking Angle 8° Featur (more)es - Different attachments enable use for a variety ofapplications - Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 5 - 80 rpm Rocking shaker with adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Even with load and voltage fluctuations, shaking speed remains constant. A fixed tilt angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker includes an anti-slip rubber mat and easy operation with a touch keypad. Suitable for continuous operation, it offers a speed range of 5 - 80 rpm with precise control in 1 RPM steps.

IKA Rocker 3D Basic Shaker Type of Movement Tumbling Speed Fix 30 RPM Shaking Diameter 8° Features  (more)- Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 30 rpm (fixed) Shaker with three-dimensional tumbling motion and a fixed speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Ideal for e.g. the cultivation of cell cultures, DNA extractions, distributing of cells, and staining and destaining of cells. Even with load and voltage fluctuations, shaking speed remains constant. A fixed angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker also includes an anti-slip rubber mat and easy operation with a touch keypad, making it suitable for continuous operation.INCLUDED: The IKA Rocker 3D Basic Shaker includes: - RD 1 universal mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Rocker 3D Basic Shaker Specifications Type of movementtumblingPermissible shaking weight (incl. attachment)2 kgPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating modecontinuous operationTumbling angle fixed 8 °Shaking platform stackable yesAltitude (when shaking platform stacked)30 mmDimensions (W x H x D) 280 x 165 x 330 mmWeight2.2 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationRocker 2D BasicRocker 2D DigitalRocker 3D BasicRocker 3D DigitalType of movementrockingrockingtumblingtumblingPermissible shaking weight (incl. attachment)2 kg2 kg2 kg2 kgSpeed range5 - 80 rpm5 - 80 rpmfixed 30 rpm5 - 80 rpmSpeed control1 RPM steps1 RPM stepsN/A1 RPM stepsTimernoyesnoyesTime setting min.N/A1 sN/A1 sTime setting max.N/A5999 minN/A5999 minRocking/Tumbling anglefixed 8°adjustable 2.5 - 15°fixed 8°adjustable 0 - 15°Shaking platform stackableyesyesyesyesDimensions (W x H x D)280 x 150 x 330 mm280 x 150 x 330 mm280 x 165 x 330 mm280 x 185 x 330 mmWeight2.2 kg2.2 kg2.2 kg2.3 kgVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

benchblotter platform rocker BENCHMARK BR1000, fixed speed, with flat mat New equipment in its origi (more)nal packaging Speed : Fixed, 12 RPM Tilt angle : environ 8° Platform size : 30 x 30 cm Load capacity : 2.3Kg Operating temp range : +4°C to 45°C Overall dimensions : 34 x 30 x 12 cm Electrical requirements : 230V, 50/60Hz, 50W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB model - For tanks of 200 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

This Thermo Spectronic French Pressure Cell Press was removed from a university lab where it was sur (more)plus to requirements. Thermo Spectronic French Pressure Cell Press FA078ESerial Number: 21QD066001 The item powers on and is in reasonably good cosmetic condition, we are unable to test it further at our facility.

This listing is for a Grant GD120 Stirred Water Bath.The unit is in full working condition and is re (more)ady for immediate release.The Grant GD120 is a state-of-the-art, digitally controlled stirred water bath and immersion thermostat, expertly designed for precise temperature control in sophisticated applications. With capabilities up to 120°C, it is ideal for a variety of laboratory tasks, ensuring accurate temperature management.Key Features:Intelligent Control Optimization (ICO): Utilizes adaptive intelligent PID temperature control for enhanced temperature stability, ensuring consistent results for sensitive experiments.High-Performance Integral Pump: Features a powerful pump with a maximum flow rate of 17 L/min, making it suitable for both immersing samples and circulating temperature-controlled fluid to external devices.Convenient Timer Function: Built-in timer for tracking reaction times and ensuring precise experimental control.Variable High-Temperature Alarm: Set alarms for deviations in temperature, providing peace of mind for critical experiments.User-Friendly Interface: Simple rotor plus two keys allows for quick access to an interactive setup interface, ensuring fast and accurate configurations.Clear Digital Display: Easy-to-read display provides instant reassurance of temperature status from a distance.Visual and Audible Alarms: Alerts users when attention is required, enhancing safety and monitoring.Operating Setpoint and Presets: Allows for one adjustable operating setpoint plus three user-defined preset temperatures for added convenience.User Calibration Facility: Ensures optimum accuracy at the required operating temperature.Safety Features: Includes low liquid protection via a float switch and adjustable over-temperature cut-out to safeguard your samples and workspace.Temperature Specifications:Temperature Range: Ambient +5 to 99°C with a plastic (P) tank, -15 to 120°C with a stainless steel (S) tankStability: ±0.02°C, ensuring precise temperature control for sensitive experiments.Heater Power Limitation: The temperature range and heater power are automatically limited based on the selected liquid type.Applications:Thermal Reactions: Ideal for experiments requiring precise thermal control, such as enzyme assays or chemical reactions.Sample Preparation: Perfect for warming samples or maintaining temperature during biological experiments.Calibration and Testing: Useful for calibrating thermometers or testing the performance of temperature-sensitive equipment.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW