Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System This was removed from a university l (more)ab where it was surplus to requirements. We were able to get the unit to communicate with the PC but we were unable to get it to run cycles due to a serial number conflict. We were able to open the door but not close it again. Included with it are; 1 x DELL PCWindows Vista Business 1 x SDS 2.3Item is in a good used condition. The Item powered on and working, but not connecting to PCR Tester 1 x Bti PRGF Desktop CentrifugeIt is in good used condition. The item powered on and was tested, all working 4 x PGRF CF10142 LOT 2894 1 x Diagnostica Stago PrinterItem powered on and tested, all working 1 x Datalogic QS6000 Plus Barcode ReaderThe item powered on and was tested, all working Associated books and a spare Block Assembly.

Refrigeration thermostat KT 18-42 FRYKA Main features: - Electronic temperature control with LED dis (more)play - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets The Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/  (more)Buckets accommodates a capacity of up to 2 x 3MTP. This rotor is designed for use with Ohaus FC5816, FC5816R, FC5718, FC5718R, FC5916, FC5916R, FC5714, and FC5720R series centrifuges. The Ohaus 30314824 2 x 3 MTP Swing Out Rotor reaches speeds up to 4,500 RPM with a maximum RCF of 2,716 x g. INCLUDED: The Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets includes: - Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036300370 Overhead Stirrer Impeller, BR 14 Collapsible-Blade Especially when using narrow-n (more)ecked vessels, e.g. round-bottom flasks, an stirring tool with collapsible blades is used. Just like our collapsible-blade impeller BR 14. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 180 mm, ideal ground clearance: 9 mm, ideal filling level: 180 mm, and ideal volume: 4,600 ml. The collapsible-blade impeller BR 14 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300370 Overhead Stirrer Impeller, BR 14 Collapsible-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate Temperature  (more)Range 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system Heidolph 036110229 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145 mm Plate is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via our integrated Hei-PROCESS solution. You can actually integrate your device in our Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the magnetic stirrer with the electric Heidolph lab jack via the USB C interface. There are three heating modes for temperature control: FAST for a quick heating, as well as PRECISE and PRECISE+ for the exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 and the double sensor Pt1000 that allows the simultaneous measurement in your sample and in the bath liquid. The possibility to program ramps and to create individual profiles, increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). For mixing your sample optimally, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. This magnetic stirrer offers all relevant safety features. The large safety distance between the heating plate and the control panel as well as the visual residual heat indicator at temperatures 50 °C protect against burns. The patented Kera-Disk® plate made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for the use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Ultimate (145 mm diameter) - Pt1000 Temperature Sensor - Pt1000 Holder with Cable Device - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty