New Scale Technologies Squiggle RV Motors DK-RV-1.8-TRK-33 Developers Kit Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt BoxShoulder Plate Kit This ite (more)m was removed from a university where it was surplus to requirement. It is in very good cosmetic condition, we are unable to test it further at our facility. The kit includes the following: 1 x monitor arm1 x tripod mount1 x 80mm lens adaptor1 x 95mm lens adaptor1 x follow focus handle1 x hard carry case1 x 40cm steer whip1 x 50cm steer whip1 x top hand grip1 x 0.5M pitch gear1 x 0.6M pitch gear1 x lens supporter2 x allen keys2 x 10cm rods1 x nun's knickers

Orbit Marine AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it was  (more)surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Thomson Linear Micron DuraTRUE 115 Gear Motor Ratio:250:1 X-Axis This was removed from a university  (more)lab where it was surplus to requirements. The unit is in good cosmetic condition with marks from use but has not been tested.

Waters Lambda-Max Model 481 LC Spectrophotometer

Eppendorf Minispin Centrifuge with F-45-12-11 Rotor The Eppendorf Minispin Centrifuge is a small, bu (more)t versatile centrifuge suitable for just about any laboratory environment. With a maximum speed of 13,400rotations per minute and a maximum RCF of 12,100 x g, the Eppendorf Minispin iscapable of spinning small samples with exceptional speed and force. At only 9.8 pounds, the Eppendorf Minispin isextremely portable and can be used in the field with ease. Similarly, its compact size makes the Minispin versatile within the lab and field, capable of being within arms-reach of a computer or workstation, without procuring a bulkyfootprint. The Eppendorf Minispin Centrifuge with F-45-12-11 rotor is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 6 Month Parts and Labor WarrantyEppendorf Minispin Centrifuge with F-45-12-11 Rotor SpecificationsMaximum Speed13,400 rpmMaximum RCF12,100 x gMaximum Capacity12 x 1.5/2.0mlDimensions8.9 W x 9.4 H x 4.7 L in.Weight9.8 lbs.Noise LevelUnder 49 dBaElectrical120V/50-60Hz

Memmert UF260 Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Volume of 256 L (9.04 cu.ft.) - Working temperature range from Min 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C, and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF260 Forced Circulation Oven 256L, 115V stands as a pinnacle of precision and durability in laboratory ovens. Engineered to maintain a broad setting temperature range from +20 to +300°C and a working temperature range that starts from just 10°C above ambient up to the maximum, this oven meets diverse heating requirements with flawless efficiency. Its high-definition TFT-color display coupled with the ControlCOCKPIT, an adaptive multifunctional digital PID-microprocessor controller, offers unparalleled user control and monitoring, ensuring optimal performance in any lab setting. Safety and usability are at the core of the Memmert UF260 design. It features a robust stainless steel interior that is easy to clean and designed to withstand rigorous use, complete with deep-drawn ribbing and integrated heating on all four sides for uniform temperature distribution. The oven includes a sophisticated air circulation system controlled by a quiet air turbine that can be adjusted in 10% steps, along with a pre-heated fresh air admixture feature. Additionally, comprehensive safety mechanisms, such as an adjustable electronic overtemperature monitor and a mechanical temperature limiter, protect against overheating. The UF260 is not only a testament to Memmert's commitment to quality but also an essential asset for any laboratory requiring reliable and precise thermal processing. INCLUDED: TheMemmert UF260 Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Motic Panthera E2 Trinocular Compound Microscope w/ Moticam BMH4000X Microscope Camera Objectives UC (more) Plan Achromatic (Pb free) 4X, 10X, 40X, 100X Optical System Color Corrected Infinity Optical System (CCIS®) Transmitted Illumination (FPS) Fixed Koehler LED Features - Mechanical stage with built-in low position rackless coaxial stage control and sample holder for smoother x/y movement - Fixed Koehler LED 1W with intensity control and nosepiece LED light intensity indicator - Coaxial coarse and fine focusing with 2μm precision and adjustable upper limit stop - Ideal for environments where immersion procedures are considered difficult or complicated - 11.6" LCD screen with native 1920x1080 pixels for real-time viewing - 8MP capture resolution with outputs via HDMI, USB, and WIFI