Scilogex 400 Vacuum Regulator/Moisture Trap

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Vertex Velp digital thermoregulator The instrument can be combined with the most common heating magn (more)etic stirrers and is supplied ready for use, complete with temperature probe and power cable for direct connection to AREX, AREC.X, AREX-6 heating magnetic stirrers. Thanks to the PW 10 branch element, VTF can be used with all types of heating devices such as water and oil baths, hot plates, thermometers, etc. Temperature Accuracy The VTF thermoregulator can be used in many applications where precision, reliability and flexibility of use are required, as it is equipped with Fuzzy Logic, which allows the thermoregulation to be automatically adapted to different situations, such as power, load and heat loss. The highly sensitive probe offers state-of-the-art temperature control performance, with an accuracy of ± 0.5 ° C Exclusive Fixing System VTF is equipped with an exclusive and innovative integrated fixing system that facilitates the positioning of the Pt100 probe inside the most common beakers. The two lateral clamps allow the height adjustment of the VTF, while the friction system ensures its movement on the horizontal plane. No system will be as comfortable! - Integrated Digital Timer Another unique feature of the VTF is the integrated timer. It is in fact possible to select up to a maximum time of 24 hours and 59 minutes, while at the end of the countdown the instrument will automatically switch off the thermoregulation. The timer mode can be recognized by the alternating flashing of the 2 arrows on the left side of the display. - Technical features: Structure: technopolymer Fixing on rods: from Ø 10 to 13 mm Pt 100 stainless steel probe: length 250 mm and Ø 3 mm Display: LCD Degree of protection CEI EN 60529: IP 54 Power supply: 12 Vdc Weight: 0.3 Kg Dimensions (LxHxP): 75x145x120 mm Adjustment range: -10 ... +300°C Accuracy: ± 0.5°C Resolution: 0.2°C Timed operation: from 0:00 to 24:59 (h: min) Remaining time display: possible Display of maximum temperature reached: possible Display visualization and automatic switching off of the heating plate in case of: - Probe shorted - Probe interrupted

SUITABLE FOR EVERY LABORATORY NEED The AREX magnetic stirrer is a great tool for basic laboratory ap (more)plications, but with the optional VTF system, which allows you to thermoregulate the sample up to 300°C with an accuracy of ± 0.5°C, it will be possible also use it for more complex applications. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. PRECISE SHAKING ARE 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. APPLICATIONS ARE 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 100 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS: Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V Sp (more)eed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BO302-A Oil Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Dimensions (WxDxH): 1800 x 610 x 940 mm

Yamato SG-848 48 in. Three Glove Compact Glove Box Gloves 3 Gloves Maximum vacuum Transfer Chamber  (more)-26” of Hg (660 torr) Maximum Pressure Main Chamber +6” of water column (11.2 torr) Features - Made in the USA - All models feature high visibility interior, cleanliness, safety, complete containment, portability and a draft-free atmopshere - All models are complete systems, nothing needs to be added except gas of choice: nitrogen, argon or other inert gases - Installed purging valves are ideal for lowering oxygen and humidity levels - Very useful when working with toxic substances, asbestos, fibers, sewage residue and harmful liquid vapors 35" Compact, completely sealed glove box with transfer chamber and flat access door for basic isolation and /or containment. INCLUDED: The Yamato SG-848 48 in. Three Glove Compact Glove Box includes: - Yamato SG-848 48 in. Three Glove Compact Glove Box - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 200 mg Material: Nickel silver High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Polyscience SD28H170-A11B 28L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60HzP (more)olyScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD28H170-A11B 28L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector Features - (more) Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainOptional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700401000 FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty