Pharmacy refrigerator P400 B-Medical-Systems

Thermo Scientific R14X-SAEV-TS GPS Series Laboratory Refrigerator This was removed from a university (more) lab where it was surplus to requirements. The unit has been tested with a digital thermometer (not included) and is in full working order It is in good cosmetic condition with marks from use. 6 Shelves - 64 x 53cm

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION LABORATORY REFRIGERATOR (more) manufactured by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Medical refrigerator, with glass door, produced by B Medical Systems - Integrated B Medical Systems  (more)multifunction electronics - High quality stainless steel, certified antibacterial, for better longevity and easy hygiene control - High internal volumetric utility, very versatile, thanks to the multiple intuitive guides that allow modularity - Internal modules and tracks fully compatible with other ML / MP models - Large storage capacity Specific features of the ML 670 SG model Preset temperature: +5°C Adjustable temperature in 0.1°C increments: +4°C to +15°C Cold / hot temperature alarm limit: +2°C / +8°C Resistance over time (from +5°C to +10°C): 2 h Climate class (ambient temperature range): SN / ST (+10°C to +32°C) Defrost: Natural Type of refrigerant: R290 Internal dimensions W x D x H (mm): 1544 x 560 x 707 Heat emission (Kcal / h): 31 Compressor running time (%): 16

PRECISION REFRIGERATOR FOR PHARMACIES (glass door) produced by B Medical System SECURITY AND PEACE O (more)F MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C F (more)reezer Temperature Setpoint Range 10°C to -15°C Capacity 14 cu. ft. Defrost Method Auto Features - Two exterior solid swing doors, right hinged, reversible - Two adjustable glass shelves (refrigerator) and two-gallon door bins, plus one half gallon door bin - One full width glass shelf (freezer) and 2 fixed door bins - High density urethane foam cabinet and door insulation - Magnetic door gasket for positive seal - Interior LED refrigerator light - Leveling legs The Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo provides a practical solution for laboratories requiring both refrigerated and frozen storage within a compact footprint. This unit features a 10 cubic foot refrigerator and a 4 cubic foot freezer, each controlled by mechanical thermostats, allowing for precise temperature settings from 1°C to 10°C in the refrigerator and -15°C to -25°C in the freezer. Constructed with high-density urethane foam insulation and a durable powder coat steel exterior, the combo ensures optimal thermal efficiency and robustness. Key attributes include two right-hinged solid doors with magnetic gaskets for a secure seal, recessed handles, and keyed locks for added security. The interior accommodates a variety of storage needs with adjustable and fixed shelving and a removable basket in the refrigerator for flexible organization. Auto-defrost functionality in the freezer simplifies maintenance while maintaining a frost-free environment, although it's noted that defrost cycles may cause temporary fluctuations in temperature. The unit stands on leveling legs that facilitate easy installation and stability on uneven surfaces, measuring 27 3/8 inches wide, 29 inches deep, and 60 3/8 inches high. Utilizing R600a refrigerant, the LRF151WWW-0HC is designed to meet the needs of general laboratory applications where efficient, dual-temperature storage is crucial. INCLUDED: The Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - 2 Adjustable Glass Refrigerator Shelf - 1 Fixed Glass Freezer Shelf - 2 Fixed Freezer Door Bins - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Temperature range: -2°C to 20°C Content: 660 L Dimensions (WxDxH): 695 x 876 x 2275 mm Weight: 152 k (more)g Explosion proof Possible options can be ordered at extra cost (see image)

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Flat polygonal sheets - set (1 mg - 500 mg) E1-class mass standards are the elite in the world of me (more)trology, because standards of this class represent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. The set includes: plastic box 12 mass standards 1 pair of tweezers 1 brush Material: stainless steel *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Hermle Rectangular bucket for Z496-1000-AC 2/pk The Hermle Rectangular bucket for Z496-1000-AC comes (more) in a pack of two and is designed to work with the Hermle Z496-1000 and Z496-100-AC rotors. The bucket can hold up to 750ml of sample volume and can handle a maximum speed of 4,200 RPM, as well as a maximum relative centrifugal force (RCF) of 3,964 x g. The rectangular shape of the bucket ensures efficient use of space, allowing for higher sample capacity per run. This bucket is made of durable materials and can withstand high speeds and centrifugal forces, making it a reliable and long-lasting accessory for a variety of centrifugation applications in research and clinical laboratories. INCLUDED: The Hermle Rectangular bucket for Z496-1000-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW