Helmer IHB245 Blood Bank Refridgerator

Manufacturer: Thermo Scientific / Revco Model: UGL-2320V Laboratory Freezer -20°C P/N: UGL2320V Desc (more)ription: Simplify operation and increase accuracy with the microprocessor control of Thermo Scientific Revco High-Performance Lab Freezers. Our Revco -30°C and -20°C high-performance freezers are designed for medical and scientific applications such as storage of reagents, pharmaceuticals, biologicals or other commonly used laboratory materials. Models offer cabinet sizes to fit a variety of space needs and storage volume requirements. Key Features: - Temperature factory-preset at -20° or -30°C. - Capacities from 4.9 to 51.1 cu. ft. (139 to 1447L). - Icon-based controls and displays. - Large, easy-to-read digital display shows temperature within 1°C. - Graphic thermometer is steady green when temperature is normal, flashes top bar for overtemperature, flashes bulb for undertemperature. Microprocessor Control: - Audible/visual warnings for overtemperature, undertemperature, or power failure. - Key-operated OFF/ON/ALARM ON master switch for setpoint security. - Push-button alarm test. - Remote alarm contacts. - Alarm silence, ringback, and auto reset. - Controller battery backup system. Construction: - Scratch-resistant cold-rolled steel interior and exterior finishes. - High-density, 2? thick (5.1cm) CFC-free urethane foam insulation protects against ambient temperature fluctuations. - CFC-free, HFC-blend refrigerant. - Single-door models are hinged on right. - Full-length door handle and key lock. - Doors self-close and lock open at 90°. - Adjustable epoxy-coated wire shelves. - 1? (2.5cm) dia. access port with plug on undercounter model. -20°C Freezers Features: Suitable for applications in which slight intermittent coil warming during an automatic defrost cycle is not desired (such as enzyme storage). Gravity convection air system for maximum stability without a blower or fan. Manual defrost. Specifications: Capacity: 659 L Dimensions (LxWxH) Exterior: 94.5 x 71.1 x 201.2cm Dimensions (DxWxH) Interior: 73.7 x 61 x 147.3 cm Temperature Range: -20°C Type: High-Performance Freezer Mains: 230V 50Hz Doors: Single, Solid   Refrigerant CFC-free 4 Shipping Weight: 193kg Temperature Control: Microprocessor Cabinet Type: Upright Defrost: Manual Items delivered: - Thermo Scientific / Revco UGL-2320V Laboratory Freezer -20°C - Shelves - Instruction Manual - Power Cord The laboratory freezer is good cosmetic as well as technical condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for 1 of 2 Grant Instruments DEN-1 DensitometerGrant Instruments DEN-1 is a compact  (more)benchtop densitometer (suspension turbidity meter) for measuring the turbidity of cell suspensions in a variety of life science applications. The densitometers are designed and factory calibrated to measure turbidity in the range of 0.5 to 4.0 McFarland units with a small standard deviation.

ScanTemp 385 Dostmann infrared thermometer Infrared thermometers use this technology to measure the  (more)surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. Technical features Temperature range: -35°C ... +365°C Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Repeatability: ± 1.0% of reading or ± 1°C, whichever is greater Elapsed time: 500 ms Spectral response: 8 - 14 µm Display resolution: 0.1°C (4-digit LCD) Working temperature: 0°C ... 50°C Switchable emissivity: 0.70 and 0.95 Distance - spot size: 8:1 Single offset point: laser Power supply: 2 AAA batteries Dimensions (L x W x H): 147.9 x 112.6 x 41.4 mm Weight: 113 g Features: Maximum temperature; display hold; LCD backlight; °C / °F switchable

Laboport N 820 G KNF Diaphragm vacuum pump resistant to chemical and corrosive liquids, compact and  (more)oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. - Flow rate (max.): 34 l/min - Final vacuum (max.): 6 mbar (abs.) - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2/-G IIB+H2 T3 - Ideal for extremely aggressive/corrosive gases and vapours - Clean operation, 100% oil-free Technical features - Flow rate (max.): 20 l/min - Final vacuum (max.): 6 mbar (abs.) - Pressure (max.): 0.1 bar (rel.) - Permissible fluid temperature between 5 and 40°C - Valve material: FFPM - Diaphragm material: PTFE coated - Pump head material: PTFE Applications - Centrifugal concentration - Degassing - Drying - Distillation - Drying of the gel - Rotary evaporation - Solid phase extraction Qualitative characteristics - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 - Ideal for extremely aggressive / corrosive gases and vapors - Chemically resistant PTFE / FFPM flow path - Clean operation, 100% oil-free - Compact, silent and reliable - Maintenance free - Small footprint to optimize workspace Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.