Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
✉️ info@questpair.com
2.5 Cu Ft Built-In Vaccine Refrigerator PH-ABT-NSF-UCBI-0204
Product Description
General Features:
- Designed per NSF/ANSI 456 Standard for vaccine storage
- Storage capacity: 2.5 cu. ft. gross volume
- Single self-closing swing solid door, right hinged, magnetic gasket, keyed lock
- Four shelves (three adjustable, one fixed) with rear guard rail
- Leveling legs for mounting
- Side wall external probe access port (3/8" diameter) with included probes
- Cabinet insulated with EPA-compliant high-density foam-in-place urethane
- Exterior: white powder-coated steel
- Compatible with PYXIS®, Omnicell®, and Acudose Rx® access control systems
Temperature Control and Monitoring:
- Parametric microprocessor controller with LED display, 0.1°C resolution
- Calibrated stainless-steel display probe with visual and audible alarms
- Temperature setpoint range: 1°C to 10°C (factory setting fixed per NSF/ANSI 456)
- High/low temperature alarms and remote alarm contacts
- Includes Temperature Monitor Device (TMD) compliant with CDC guidelines, calibrated for 3 years, buffered probe in simulated product solution, min/max memory, field-installable
Environmental and Electrical Specifications:
- Refrigerant: HFC-free, hydrocarbon refrigerant for environmental safety and energy efficiency
- Operating environment: indoor only, +18°C to +26°C ambient, <70% relative humidity
- Rated amperage: 0.9 Amps
- Facility power: 110-120V AC, 15 A minimum, NEMA 5-15 plug with UL471 compliance
- Noise level: ≤ 34 dBA installed
Performance:
- Temperature uniformity (cabinet air): ±1.1°C
- Temperature stability (cabinet air): ±0.7°C
- Maximum temperature variation: ±1.2°C
- Temperature rise after 8-second door openings did not exceed 7.2°C at any probe
- Recovery to under 8°C within 7.5 minutes after 3-minute door opening
- Energy consumption: 0.58 kWh/day
- Average heat rejection: 1.00 kWh/day (142 BTU/hr)
- Pull-down time to nominal operating temperature: 42 minutes
Certifications and Warranty:
- Certified NSF/ANSI 456, UL, C-UL, ETL, C-ETL listed
- Meets UL471 Hydrocarbon Refrigerant Safety standards
- Two-year parts and labor warranty (excluding display probe calibration)
- Five-year compressor warranty
Weight and Shipping:
- Product weight: 72 lbs (32.7 kg)
- Shipping weight: 88 lbs (39.9 kg)
Additional Notes:
- No interior lighting
- Multiple shipping options available, including inside delivery with installation services
- Recommended for pharmaceutical and CDC-compliant vaccine storage in controlled environments
Item Stats
Product details
| OPERATIONAL ENVIRONMENT | INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH |
| STORAGE CAPACITY | 2.5 CU. FT. GROSS VOLUME |
| DOOR | ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK |
| SHELVES | FOUR SHELVES (THREE ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK |
| MOUNTING | LEVELING LEGS |
| INTERIOR LIGHTING | N/A |
| EXTERNAL PROBE ACCESS | SIDE WALL PORT (3/8") DIA. |
| INSULATION | CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM |
| EXTERIOR MATERIALS | WHITE POWDER COATED STEEL |
| ACCESS CONTROL | PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE |
| GENERAL WARRANTY | TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION |
| COMPRESSOR WARRANTY | FIVE (5) YEARS COMPRESSOR WARRANTY |
| PRODUCT WEIGHT | 72 LBS. |
| SHIPPING WEIGHT | 88 LBS. |
| RATED AMPERAGE | 0.9 AMPS |
| PLUG/POWER CORD | NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL |
| FACILITY ELECTRICAL REQUIREMENT | 110-120V AC: 15 A (MINIMUM) |
| AGENCY LISTING AND CERTIFICATION | CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY. |
| INCLUDED ACCESSORIES | TEMPERATURE MONITOR DEVICE (TMD) COMPLIES WITH THE CURRENT CDC GUIDELINES, WITH 3 YEARS CERTIFICATION OF CALIBRATION, “BUFFERED” PROBE IN THE PRODUCT SIMULATED SOLUTION, MIN/MAX MEMORY, FIELD INSTALLABLE, AND VISUAL & AUDIBLE TEMP ALARM |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €2,362.81*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.