Welch 1430C Foot Switch Fußschalter Pedal for all Vacuum Pump WOB-L Dryfast

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for intimidate realese.

KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/mi (more)n (1.2 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet and reliable - Start against ultimate vacuum of the pump - Modular expandable - 100% oil-free transfer - Environmentally friendly The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System is a chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This KNF Neuberger Laboport Diaphragm Pump Type - N840.3 FT.18 was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with some marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco FlaskScrubber Glassware Washer, undercounter with window Features Achieve higher water  (more)temperatures for enhanced washing, faster drying, and sanitizing LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses Click Here to View Product Video INCLUDED: The Labconco 411101000 FlaskScrubber Glassware Washer, undercounter with window, 115V, 60Hz includes: - Lower Spindle Rack w/ Glassware Holders - Small Spindle Accessory Kit - Leveling Feet x 4 - Screws x 2 - Hose Clamp - Drain Hose - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle SIEVA-3-TC Filtration Centrifuge w/ External Temperature Control & 500ml Perforated Centr (more)ifugal Basket Speed Range 200 to 10,000 RPM Max. RCF 7,825 x g Tempering Liquid Max. Temperature 90°C Features - Ideal for cake filtration and decantation - Advanced microprocessor controls with adjustable accel/decel rates - Program storage up to 99 settings - Transparent viewing port for close sample monitoring - Touch panel operation and LED status indicator - Energy-saving standby mode - External temperature equalization ports for heating or cooling - Stainless steel housing for corrosion resistance and easy cleaning - 500ml perforated and non-perforated baskets available - Four filter mesh sizes ranging from 7µm to 50µm - Side drain for easy removal of clarified liquids The Hermle SIEVA-3-TC Filtration Centrifuge with External Temperature Control and a 500ml perforated centrifugal basket is engineered for precise and efficient cake filtration and decantation. This bundle includes the 500ml perforated basket, offering immediate versatility for your applications. With speeds up to 10,000 rpm and a maximum RCF of 7,825 x g, the SIEVA-3-TC delivers reliable sample separation. The addition of external temperature control ports enables seamless integration of heating or cooling elements for temperature-sensitive processes. Its stainless steel housing ensures excellent durability and resistance to corrosion, while the transparent lid with a viewing port allows for real-time monitoring. A side drain streamlines the removal of clarified liquids, enhancing workflow efficiency. Advanced microprocessor controls optimize the performance of the SIEVA-3-TC, providing precise speed settings in rpm or RCF, adjustable acceleration and deceleration rates, and programmable end-of-run alarm tones. The intuitive interface allows for easy retrieval of saved programs, simplifying repetitive tasks. Additional safety and convenience features include an automatic lid lock, imbalance switch-off, and a quick key for short runs. With its innovative design and temperature control capabilities, the SIEVA-3-TC is an ideal solution for laboratories requiring advanced filtration and temperature-regulated applications. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge w/ External Temperature Control & 500ml Perforated Centrifugal Basket includes: - Z600-500-P 500ml Perforated Centrifugal Basket - External Temperature Control Connection Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

4 adapters 3x15ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 11133 F (more)or 4 x 3 Falcon tubes of 15ml

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/4 is designed for scales equipped with terminal PUE 7 series. It is installed next to the terminal. Communication through RS232, power supply 5V from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing. Intended Use: Designed for scales equipped with terminal PUE 7 series. It is installed next to the terminal. Communication through RS232, power supply 5V from scale terminal.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW