Thermo Scientific Lab Vision PT Module incl. Pump Kit

Pall Corporation Sentino Microbiology Pump & 30 x MicroFunnel Filter Funnels This was removed f (more)rom a university lab where it was surplus to requirements. Included are; Pall Corporation Sentino Microbiology pumpModel: 89732 rev ESerial#: 01179 The item is in good cosmetic condition. No tubing is with it. The item powers on with buttons and indication lights in full working order. When powered on and tested, the motor runs smoothly with no issues. Pall Corporation 30 MicroFunnel Filter Funnels Model: MicroFunnel 300 Plus with sUPOR 0.4 µm, White, GriddedRef: 4815Lot: FL3059 One box is brand new with 20pcs other box has been opened and contains 10pcs.

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

VACUUBRAND ME 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Spee (more)d 1.4 cfm Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Outstanding chemical resistance. - Long diaphragm life, maintenance-free drive system. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. One-stage chemistry diaphragm vacuum pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. Typical applications are vacuum ovens, filtrations as well as concentration of solvents with low boiling points. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. The well proven robust PTFE sandwich diaphragm provides outstanding reliability and operating life. INCLUDED: The VACUUBRAND ME 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN840.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 34L/min  (more)(2.04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free - Self-drying system removes condensate without affecting the vacuum level The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables.

Edwards nXDS15iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS15iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS15iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Manufacturer: HTG Model: Firefly Imaging System P/N: 90006 S/N: FF-0025 YoM: 2008 Description: The  (more)FireFly is a high-quality, highly sensitive, luminescent imager with a charge coupled device (CCD) camera that can image multiple targets for an entire 96-well plate in about 15 minutes, allowing researchers to analyze samples directly at their workstation in the laboratory.The system optimizes imaging for HTG’s ArrayPlate qNPA™ technology; a high throughput array that enables multiplexed measurement of RNA levels, DNA expression and protein function. HTG’s ArrayPlate qNPA technology is used to carry out quantitative multiplexed, gene-based drug discovery programs, including target validation, HTS lead optimization, metabolism, toxicology and clinical development.The HTG FireFly Bench Top Chemiluminescent Imager has been specifically designed for use with qNPA kits for directly measuring gene expression on multiple targets simultaneously in a wide range of sample types including formalin-fixed paraffin-embedded tissues without the need for extraction or amplification. The imager allows laboratory researchers in smaller labs to perform studies that previously were not possible due to budget constraints. Applications: - drug discovery - molecular diagnostic such as target gene validation, gene expression screening and time course studies. - in vitro and in vivo pharmacology- metabolism and drug safety studies performing treatment profiling, dose response curves and compound optimization. Features: - Low background and exceptionally high resolution enables researchers to discriminate extremely small changes, < 20 %, in target gene level activity with great confidence, providing the highest quality data to make critical decisions in their research.- Ability to read partial plates allowing increased cost effectiveness in matching plate use to a research budget.- Expandable capacity to read additional formats planned for future software versions.- Simplified, robust optical design that allows high-quality gene-expression experiments on the bench. The HTG FireFly also has a small footprint.- Proprietary light amplification technology increases sensitivity without the need for a cryogenically cooled CCD chip.- The software has been designed to allow researchers sophisticated control over the imager. The instrument’s graphic user interface is intuitive and easy to use. This makes it ideal for multi-user environment where scientists can read plates quickly without overly complex instrument controls. Items delivered: - HTG Firefly Imaging System Condition: The item is in perfect cosmetic as well as working condition. It is 100% functional tested and ready to be operated.

See attached document for more information.

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.