KNF UN820.3FT.40P IP44-T Diaphragm Pump

GILSON MiniPuls 2 Peristaltic Pump 1 channel only Voltage: 220-240V, 50/60Hz Standard flow rate: 0.3 (more) µL/min – 30 mL/min at maximum pressure 0.5 MPa Continuous flow Forward and reverse movement.

Leybold Sogevac SV200 Single Stage Rotary Vane Vacuum Pump Lab This was removed from a university la (more)b where it was surplus to requirements. The unit has been professionally serviced and is in full working order at 2 x 10 m/bar. It is in excellent cosmetic condition.

VACUUBRAND RC 6 Chemistry-HYBRID Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Spee (more)d 4.1 CFM at 60Hz Number of Heads/Stages 2/2+2 Features - Reduced internal corrosion, even when working with corrosive vapors - Oil changes typically reduced 90% or more compared with rotary vane pumps alone - Most economical solution: In practical operation a cold trap is often no longer necessary - Ease of maintenance due to telescopic design The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore, the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. INCLUDED: The VACUUBRAND RC 6 Chemistry-HYBRID Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LABOPORT SR 840 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 34L/mi (more)n (2.04 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - 3-color status display for in operation / stand-by / error - Compact, quiet, and reliable - Start against ultimate vacuum of the pump - Integrated gas ballast valve - Integrated rotational speed control - 100% oil-free transfer - Environmentally friendly Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SR 840 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Core 120 Peristaltic Pump This peristaltic pump is ideal for the simple conveying  (more)of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By simply flipping the switch, it can also be conveyed in an anti-clockwise direction.Depending on the adapted pump head, a flow rate of 0.83 - 861 ml/min for the single-channel and 0.005 - 364 ml/min for the multi-channel pump head is guaranteed. The Core 120 conveys with a control accuracy of ± 5% at a speed range of 10 - 120 rpm. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards nXDS10iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS10iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS10iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

This listing is for a Hettich EBA 20 CentrifugeEBA 20 and EBA 20 S are compact and practical centrif (more)uges for small sample volumes. They are fitted as standard with an angle rotor for 8 tubes up to a volume of 15 ml. The EBA 20 attains a max. RCF of 3,461 and is the ideal choice for a medical practice.

Heraeus Labofuge 400 Function Line Benchtop Centrifuge This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and runs smoothly up to 3500rpm. It is in reasonable cosmetic condition with light marks and rusting. Heraeus Rotor #81794 x Buckets #8172 Ch.003515

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 1 mg Material: aluminum M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.