KNF LIQUIPORT IP65 NF 100 FT.18RC Diaphragm Liquid Transfer Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Varian Turbo V60 Turbomolecular Pump 969-9002 was removed from a university lab where it was su (more)rplus to requirements. The unit was inspected by a qualified service engineer at ambient pressure. It is in good working order. The controller is not included and was used for testing purposes only. The listing is just for the pump. No controller is included. It is in very good cosmetic condition with only minor marks from use.

Genevac Boc Edwards Scroll Pump Model XDS5 This item was removed from a university laboratory where  (more)it was surplus to requirements. It powers on and is in good cosmetic condition. Please note: The pump requires connection to a Genevac evaporator to initiate operation. Model: XDS5

KNF UN840.1.2FTP IP44 Diaphragm Pump Ultimate Vacuum 90 mbar (abs.) Maximum Flow Rate 65L/min (3.9  (more)m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free Thechemically-resistant UN840.1.2FTP diaphragm pump is a oil-free deviceused in a wide range of laboratory applications. These pumps transfer and pumpdown without contamination.The heart ofthis very compact pump is a KNF structured diaphragm. This patented diaphragmwas stress-optimized using the Finite Elements method. As a result, we wereable to make the pump smaller while increasing the service life of thediaphragm and improving performance. This pump is 115V. INCLUDED: The KNF UN840.1.2FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards mXDS3s Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5  (more)m^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3s Dry Scroll Pump includes: - Inlet Isolation Valve - Exhaust Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

P.A. Hilton Boyles Law Demonstrator This was removed from a university lab where it was surplus to r (more)equirements. It is in reasonably good cosmetic condition. This item does not power on, therefore sold as Spares or Repairs.

Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, &a (more)mp; 50mm x 8mm Magnetic Stir Bar, 110V Speed Range 200 to 1500 RPM Temperature Range Ambient to 280C Maximum Stirring Quantity 3L Features - Heat only, stir only or heat and stir together functions - Digital temperature control with max. temperature up to 280C - Digital speed control with max. speed up to 1500rpm, with new brushless motor - Stainless steel work plate with ceramic coating provides good chemical resistant performance and easy cleaning - LED display shows temperature and speed - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ± 0.5C - The “HOT” warning will flash when the work plate temperature is above 50C even if the hotplate is turned off - Accessory reaction blocks for flasks and vessels available - Electronic speed control for constant speed even during changes in load - cTUVus approved for UL and CSA The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar is a very economically priced LED digital hotplate stirrer ideal for handling small volume tasks on daily application, as a low temperature magnetic stirrer with maximum temperature at 280C. This compact unit can be used as a hotplate, stirrer, or combination. INCLUDED: The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar, 110V includes: - Ceramic Coated Steel Plate - PT-1000 Temperature Sensor - Sensor Support Stand - 50mm x 8mm Magnetic Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 2.5L -84C Benchtop Freeze Dryer with stainless steel coil and collectorFeatures -  (more)Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C (-119F), suitable for samples with low eutectic points including acetonitrile. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 2.5Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 710201000 FreeZone 2.5L -84 C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Block, 35 x 2.0ml The Benchmark Block (for 35 x 2.0ml) for use with the MultiTherm Heating (more) Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 35 x 2.0ml includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty