Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

Edwards nXDS15iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. Unlike the standard nXDS15i, the Edwards nXDS15iR isdesigned for specialist applications such as gas recirculation, rare gaspumping and recovery or other applications where the dilution of the pumped gasis undesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS15iR Dry Scroll Pump includes: - Power Cord - Operator’s Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 ST.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LABOPORT SC 820 G IP30 Diaphragm Pumping System w/ Wireless Remote Control Ultimate Vacuum 6 mba (more)r Maximum Flow Rate 20L/min (1.2 m3/h) Protection Class IP30 Features - Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function - High recovery rates even with low boiling point solvents - Remote-controlled for safe operation from outside closed fume hoods - ATEX compliant to (Ex) II 3/-G Ex h IIB+H2 T3 Gc internal atmosphere only - Easy, intuitive control via touchscreen display and precise rotation knob - Four operating modes for nearly all common lab applications - Integrated rotation speed control for precise vacuum control - Integrated gas ballast valve - Environmentally friendly Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side, high performance condenser on pressure side and vacuum controller. Ideal for rotary evaporation and other applications where control of vacuum level is important. INCLUDED: The KNF LABOPORT SC 820 G IP30 Diaphragm Pumping System w/ Wireless Remote Control includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - USB Cable for Connecting to PC - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-16943 Beckman Coulter CEQ 8000 Genetic Analysis System CN/ 608450 Lab ITEM-38134 2 x Bio-Rad 3000Xi ITEM-38135 Sanyo DNA Amplifier MIR-D30 ITEM-38157 Beckman SW41 Ti Rotor ITEM-38185 4 x 2Ltr Oil Baths &amp; 4 x 1Ltr Oil Baths ITEM-41815 Zebra GK420t Direct Thermal Label Printer Lab ITEM-41824 Decon F5100b ITEM-41829 Grant JB2 Water Bath ITEM-41830 Griffin 100 Series Water Bath ITEM-41774 Applied Imaging Microscope Camera ControllerITEM-41832 3 x Therroll Somedic Production AB ITEM-41833 Hanna Magnetic Stirrer Hi 190 MITEM-41901 Nikon Model C-SHG Microscope Mercury Lamp Illuminater ITEM-41902 Schott KL 1500-T Fibre Optic Light Source ITEM-41903 International Markets Supply Cold Light IlluminatorITEM-41904 RT Power Supply Spot RTPS-IN ITEM-41905 Dage MTI CCD72 Camera ITEM-24186 Agilent 3395B Integrator Chromatography Printer Lab ITEM-24047 Pair of Leica HC PLAN 10x /20 Eyepieces ITEM-21151 KNF SLS Lab Basics Mini Vacuum Pump Type: PM31323-86.18 ITEM-21153 Grant Water Bath ITEM-21069 Real Time Controller Camera Support Unit FSECSU02AAA ITEM-29702 Grant Type JB4 Water Bath ITEM-24111 Manfrotto 229 3D Super Pro Head ITEM-21219 Prior Microscope &amp; 4 Objectives - 42x/0.70, 5x/0.12, MU 90 1.25, 8 0.20 Lab

Ohaus MB23 Moisture AnalyzerThe new OHAUS MB23 Basic Moisture Analyzers combine high quality and dur (more)able construction into a sleek, compact design. The MB23 offers dependable, accurate, results for a wide variety of applications. The OHAUS MB23 provide accurate results at either 0.1% or 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements to 0.1% or 0.05%. Set up and operation is extremely easy. Just press and hold thetemperature or time buttons to set drying parameters, add your sample and begin the testprocess. This makes the MB23 and MB25 ideal for routine tasks performed by operators of allskill levels. The compact footprint (17 x 13 x 28 cm) of the OHAUSMB23 is designed to take up less space. Their easy-to-clean heating chamber isideal for frequent use and inexpensive maintenance. Click Here to View Product Video INCLUDED: The Ohaus MB23 Moisture Analyzer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement Modes: pH, mV, relative mV (RmV), ORP or ion concentration (ISE) with temperature Probe  (more)Type: pH electrode, ORP electrode, ion selective electrode (ISE), reference half-cell electrode, ATC temperature probe Range (pH): -2.000 to 20.000 Accuracy (pH): ±0.002 Resolution (pH): 0.1/0.01/0.001 Calibration Points (pH): 1 to 5 Range (ISE): 0.0001 to 19900 with selectable units of ppm, Molar, mg/L, %, ppb or none Accuracy (ISE): ±0.2 mV or ±0.05% of reading whichever is greater Resolution (ISE): 0.0001 minimum, 1 to 3 significant digits (user selectable) Calibration Points (ISE): 1 to 5 Advanced ISE Functions: Segmented (point-to-point) slope, non-linear selectable auto-blank, low concentration range stabilit Range (mV): ±2000.0 mV Range (Relative mV): ±2000.0 mV Accuracy (mV): ±0.2 mV or ±0.05% of reading whichever is greater Resolution (mV): 0.1mV Range (ORP): ±2000.0 mV Temperature Range: -5.0°C to +105.0°C Temperature Accuracy: ±0.1°C Temperature Resolution: 0.1°C Alarm Output: High/low limit alarm, calibration due alarm Calibration: pH with calibration editing option, ion concentration (ISE) with calibration editing option, relative Calibration Points: 1 point relative mV (RmV) mode, 1 point ORP mode Log Function Type: Automatic data logging with Auto-Read and Timed measure modes; manual data logging Dimensions (LxWxH): 240 x 100 x 65 mm Weight: 0.5 kg Including new Thermo Orion calcium electrode for measuring calcium in aqueous solutions.

System consists of: PAA KiNEDx arm Peak Analysis 1M linear rail Peak Analysis CS-10 carousel with st (more)acks 2 Microplate stackers Software As-is, no warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7&rdquo; TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software &quot;LABEL EDITOR&quot;, and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW