Heidolph Rotavac Vario Pumping Unit, 115V

Deliver precise vacuum and offer widely diverse control functions for a huge range of applications i (more)n the laboratory. The intuitive user guidance on the hand terminal ensures ease of operation; the process parameters can be entered over a touchscreen and a rotation knob. Ajustment capabilities: Units of measurement The operating language The operating mode Parameters, such as the setpoint pressure or suction capacity of the system direct over rotation knob. Depending on the selected operating mode, the graphic display of the hand terminal then indicates the respective process variables. The user can intervene in the ongoing process at any time with the hand terminal and its integrated touchscreen and rotating knob. The hand terminal can be located via vacuum pump system (paging); the hand terminal will answer with a signal tone. Four operating modes: Evacuate – The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. Pressure control – The vacuum pump system controls the system pressure to the set value (constant pressure). Automatic – The vacuum pump system automatically finds the vapour pressure of the sample and adjusts the process pressure accordingly. Individual pressure function – The vacuum pump system controls the process according to a user-defined pressure curve. The setpoint pressure and the opening and closing of the coolant valve (accessory) on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed pressure curve.At any time during an active process, you can switch to manual process control. Functions for Evacuate and Pressure control will be available simultaneously. Flow rate (at atm. pressure): 1.26 m³/h Flow rate (at atm. pressure): 21 l/min Ultimate vacuum (< 5.0 with gas ballast valve in use): 2.0 mbar abs. Operating pressure (max.): 0.5 bar (rel.) Dimensions (WxHxD): 366 x 423 x 294 mm Weight: 15 kg

The VT 4.16 is a medium vacuum, dry displacement pump designed to operate on a continuous duty basis (more). It utilizes self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. Speed (50/60 Hz): 1420/1700 rpm Inlet capacity (50/61 Hz): 16/19 m3/h Vacuum: – 850 mbar

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5  (more)x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for high vacuum applications. It offers user-friendly operation via a 7-inch touch display, with remote control capabilities through a web server. Designed for reliability and versatility, this system handles a wide range of demanding tasks. Featuring a final pressure of 1 x 10⁻⁷ mbar (7.5 x 10⁻⁸ Torr) and a maximum pumping speed of 1.8 m³/h, it ensures efficient and consistent vacuum generation. Equipped with the Pfeiffer MVP 030-3 diaphragm backing pump and the HiPace 80 Neo turbopump, this unit provides a pumping speed of 67 l/s for nitrogen. It operates quietly, with an emission sound pressure level of ≤50 dB(A), and is suitable for worldwide use with its wide range of input voltages (100-240 V AC). The air-cooled system, compact design, and flexible connection options make it an ideal solution for various high-vacuum needs. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA VACSTAR Digital Vacuum Pump Maximum Flow Rate 22 L/min (1.32 m^3/h) Final Pressure 2 mbar Sucti (more)on Levels 4 Features - High suction capacity of the four-chamber membrane vacuum pump - Requires low space due to compact design - High serviceability features for ease of maintenance - Parameters are adjustable via a rotary-push button - Digital display indicates current rpm (rotations per minute) - Automated processes managed by the optional vacuum controller VC 10 - Includes analogue cable for pump-controller connection - VSE 1 vacuum safety emission recommended for additional security: Prevents solvent release into the environment - Ideal for dry and oil-free applications in laboratory settings - Membranes feature high chemical resistance The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory. An analogue cable which is required for connecting pump and controller is included in the delivery of the pump. Additionally it is recommended to use the VSE 1 vacuum safety emmission. It prevents that solvents are released into ambient air. The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant. INCLUDED: The IKA VACSTAR Digital Vacuum Pump includes: - Vacuum hose (1 m) - Silencer - USB A-B Cable - Connecting Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA VACSTAR Digital Vacuum Pump Specifications Pump rate max. (50/60Hz)1.32 m³/hPump rate max. (50/60Hz)22 l/minFinal pressure without gas ballast2 mbarSuction levels4Cylinder4Connection diameter suction side8 mmConnection diameter pressure side8 mmInput pressure2 - 1030 mbarTwo-point controlyesAnalog speed vacuum controlyesSpeed controlTurning knob Speed range285 - 1200 rpm DisplayLED Noise at low. pressure54 dB(A)Material in contact with mediumAl2O3; PTFE; FFPM; PPS; NBRHousing materialalu-cast coating / thermoplastic polymerMode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)150 x 375 x 370 mmWeight11.5 kgPermissible ambient temperature5 - 40 °CPermissible ambient conditions80% (up to 31°C), decreasing linearly to max. 50 (@40°C)Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input130 WPower input standby3 W

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Biohit Model: mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl P/N: 725020 S/N: 125955 (more)85 Beschreibung: Die mLINE ist Biohit fortschrittlichste mechanische Pipettenfamilie. Sie bietet einzigartige Ergonomie, Leistung und Sicherheit beim manuellen Pipettieren. Sie wurde besonders für wiederholtes und lange dauerndes Pipettieren entwickelt, um arbeitsbedingte Verletzungen an Händen, Armen und Schultern sowie RSI (Repetitive Strain Injury) zu verhindern. Die mLINE wird immer wieder von Gesundheits- und Sicherheitsbeauftragten auf der ganzen Welt empfohlen. Leistungsmerkmale: - Exzellente Ergonomie, die vor Verletzungen schützt, äußerst leichte Pipettier- und Spitzenabwurfkräfte- Hohe Genauigkeit und Präzision, auch während repetitivens und langwährenden Pipettierens- Minimiertes Kontaminations-Risiko mit Safe-Cone-Filtern und voll autoklavierbar- Verbesserte Sicherheit mit Volumensperre, verhindert versehentliche Volumenänderungen während des Pipettierens Technische Daten: - Produkt Familie: mLINE- Pipettentyp: Mechanische Pipetten, einstellbares Volumen- Primärer Produkttyp: Pipetten- Kanäle: 1- Volumen: 0,5 – 10 µL- Maße (BxTxH): 280 x 85 x 45 mm Lieferumfang: - Biohit mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl OVP- Accessoires (s. Bilder)- Gebrauchsanleitung Biohit mLINE mechanische Pipette ist in neuwertigem Zustand, in Originalverpackung und vollkommen funktionsfähig.

Arctiko Flexaline LRE 60-US +2 C / +8 C Counter Top Refrigerator Refrigerant R600a Temperature Ra (more)nge +2 / +8 °C (+35.6 / 46.4 °F) Capacity 2.12 Cu. Ft (60 Liters) Features - Superior performance and temperature stability - High-quality MEC-183 digital controller with battery backup - Integrated data logger with USB interface - Attractive purchase price - Freeze guard (refrigerator models) - Door alarm - Solid door Lock - Power failure alarm (visual and acoustic) - LED light - Port hole (20mm) - Forced air cooling (refrigerator models) - UL61010 certification - Energy Star rating - 115V/60Hz supply - Sizes available from 2.11cu.ft. up to 21.11 cu.ft. The Arctiko Flexaline™ LRE 60-US counter top fridge offers the superior features required for pharmaceutical applications at an attractive price. This model will fit anywhere due to its compact design and dimensions.INCLUDED: The Arctiko Flexaline LRE 60-US +2 C / +8 C Counter Top Refrigerator includes: - Key for Door Lock - Shelves - Power Cord - Operators Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VACFe (more)atures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC SpecificationsPart NumberCA05A1T1-41AA1NCooling Capacity @ 20°C1.74 kWCooling Capacity @ 10°C1.29 kWCooling Capacity @ 0°C0.77 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 90 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements120V, 60Hz, 17.4AShipping Weight172 lbs / 78.1 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(7) { background-color: #fffacd; }